docker logs ia_visualizer_alpr [setupvars.sh] OpenVINO environment initialized [Tue Aug 9 05:30:08 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:30:08 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:30:08 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:30:08 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:30:08 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:30:08 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:30:08 2022] WARN:get_config_value:204: JSON does not contain key: zmq_recv_hwm [Tue Aug 9 05:30:08 2022] WARN:zap_initialize:205: Running ZeroMQ TCP sockets without allowed_clients [Tue Aug 9 05:30:08 2022] WARN:init_curve_client_socket:2120: ZeroMQ TCP client socket running in insecure mode 2022-08-09 05:30:08,657 : INFO : {} : root : [subscriber.py] :start : in line : [35] : ALPR_camera1 Running... [Tue Aug 9 05:30:08 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:30:08 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:30:08 2022] WARN:get_config_value:204: JSON does not contain key: zmq_recv_hwm [Tue Aug 9 05:30:08 2022] WARN:zap_initialize:205: Running ZeroMQ TCP sockets without allowed_clients [Tue Aug 9 05:30:08 2022] WARN:init_curve_client_socket:2120: ZeroMQ TCP client socket running in insecure mode 2022-08-09 05:30:08,660 : INFO : {} : root : [subscriber.py] :start : in line : [35] : visual Running... [Tue Aug 9 05:30:08 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:30:08 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:30:08 2022] WARN:get_config_value:204: JSON does not contain key: zmq_recv_hwm [Tue Aug 9 05:30:08 2022] WARN:zap_initialize:205: Running ZeroMQ TCP sockets without allowed_clients [Tue Aug 9 05:30:08 2022] WARN:init_curve_client_socket:2120: ZeroMQ TCP client socket running in insecure mode [Tue Aug 9 05:30:08 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:30:08 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode 2022-08-09 05:30:08,664 : INFO : {} : root : [subscriber.py] :start : in line : [35] : truckStatus Running... [Tue Aug 9 05:30:08 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode 2022-08-09 05:30:08,666 : INFO : {} : root : [visual_alerts.py] :start : in line : [27] : Running... 2022-08-09 05:30:08,668 : INFO : {} : root : [driving_mode_status.py] :start : in line : [25] : Running... 2022-08-09 05:30:08,668 : INFO : {} : root : [base_visualizer.py] :start : in line : [526] : Running... [Tue Aug 9 05:30:09 2022] WARN:base_recv:1653: Error occurred on ZMQ socket, however, queue still has messages, returning from internal ZMQ queue (python3:18): dbind-WARNING **: 05:30:09.644: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-Om4iAkHDqv: Connection refused Gtk-Message: 05:30:09.676: Failed to load module "canberra-gtk-module" Gtk-Message: 05:30:09.679: Failed to load module "canberra-gtk-module" (python3:18): Gdk-ERROR **: 05:30:09.927: The program 'python3' received an X Window System error. This probably reflects a bug in the program. The error was 'BadValue (integer parameter out of range for operation)'. (Details: serial 270 error_code 2 request_code 130 (MIT-SHM) minor_code 5) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the GDK_SYNCHRONIZE environment variable to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) ./visualizer_start.sh: line 16: 18 Trace/breakpoint trap (core dumped) python3 main.py [setupvars.sh] OpenVINO environment initialized [Tue Aug 9 05:32:03 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:32:03 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:32:03 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:32:03 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:32:03 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:32:03 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:32:03 2022] WARN:get_config_value:204: JSON does not contain key: zmq_recv_hwm [Tue Aug 9 05:32:03 2022] WARN:zap_initialize:205: Running ZeroMQ TCP sockets without allowed_clients [Tue Aug 9 05:32:03 2022] WARN:init_curve_client_socket:2120: ZeroMQ TCP client socket running in insecure mode 2022-08-09 05:32:03,521 : INFO : {} : root : [subscriber.py] :start : in line : [35] : ALPR_camera1 Running... [Tue Aug 9 05:32:03 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:32:03 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:32:03 2022] WARN:get_config_value:204: JSON does not contain key: zmq_recv_hwm [Tue Aug 9 05:32:03 2022] WARN:zap_initialize:205: Running ZeroMQ TCP sockets without allowed_clients [Tue Aug 9 05:32:03 2022] WARN:init_curve_client_socket:2120: ZeroMQ TCP client socket running in insecure mode 2022-08-09 05:32:03,526 : INFO : {} : root : [subscriber.py] :start : in line : [35] : visual Running... [Tue Aug 9 05:32:03 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:32:03 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:32:03 2022] WARN:get_config_value:204: JSON does not contain key: zmq_recv_hwm [Tue Aug 9 05:32:03 2022] WARN:zap_initialize:205: Running ZeroMQ TCP sockets without allowed_clients [Tue Aug 9 05:32:03 2022] WARN:init_curve_client_socket:2120: ZeroMQ TCP client socket running in insecure mode 2022-08-09 05:32:03,531 : INFO : {} : root : [subscriber.py] :start : in line : [35] : truckStatus Running... [Tue Aug 9 05:32:03 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:32:03 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode 2022-08-09 05:32:03,546 : INFO : {} : root : [visual_alerts.py] :start : in line : [27] : Running... [Tue Aug 9 05:32:03 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode 2022-08-09 05:32:03,552 : INFO : {} : root : [driving_mode_status.py] :start : in line : [25] : Running... 2022-08-09 05:32:03,552 : INFO : {} : root : [base_visualizer.py] :start : in line : [526] : Running... 2022-08-09 05:32:03,851 : INFO : {} : root : [driving_mode_status.py] :start : in line : [32] : New driving mode received: {'cargo': 1, 'engine': 1, 'gps': {'longitude': 0, 'speed': 0, 'latitude': 0}, 'driving_mode': 'Parking', 'driver_name': 'Tomas', 'service': 'truckStatus'} (python3:17): dbind-WARNING **: 05:32:04.579: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-Om4iAkHDqv: Connection refused Gtk-Message: 05:32:04.601: Failed to load module "canberra-gtk-module" Gtk-Message: 05:32:04.602: Failed to load module "canberra-gtk-module" [Tue Aug 9 05:32:04 2022] WARN:base_recv:1653: Error occurred on ZMQ socket, however, queue still has messages, returning from internal ZMQ queue (python3:17): Gdk-ERROR **: 05:32:05.100: The program 'python3' received an X Window System error. This probably reflects a bug in the program. The error was 'BadValue (integer parameter out of range for operation)'. (Details: serial 270 error_code 2 request_code 130 (MIT-SHM) minor_code 5) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the GDK_SYNCHRONIZE environment variable to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) ./visualizer_start.sh: line 16: 17 Trace/breakpoint trap (core dumped) python3 main.py [setupvars.sh] OpenVINO environment initialized [Tue Aug 9 05:34:42 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:34:42 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:34:42 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:34:42 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:34:42 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:34:42 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:34:42 2022] WARN:get_config_value:204: JSON does not contain key: zmq_recv_hwm [Tue Aug 9 05:34:42 2022] WARN:zap_initialize:205: Running ZeroMQ TCP sockets without allowed_clients [Tue Aug 9 05:34:42 2022] WARN:init_curve_client_socket:2120: ZeroMQ TCP client socket running in insecure mode 2022-08-09 05:34:42,489 : INFO : {} : root : [subscriber.py] :start : in line : [35] : ALPR_camera1 Running... [Tue Aug 9 05:34:42 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:34:42 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:34:42 2022] WARN:get_config_value:204: JSON does not contain key: zmq_recv_hwm [Tue Aug 9 05:34:42 2022] WARN:zap_initialize:205: Running ZeroMQ TCP sockets without allowed_clients [Tue Aug 9 05:34:42 2022] WARN:init_curve_client_socket:2120: ZeroMQ TCP client socket running in insecure mode 2022-08-09 05:34:42,494 : INFO : {} : root : [subscriber.py] :start : in line : [35] : visual Running... [Tue Aug 9 05:34:42 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:34:42 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:34:42 2022] WARN:get_config_value:204: JSON does not contain key: zmq_recv_hwm [Tue Aug 9 05:34:42 2022] WARN:zap_initialize:205: Running ZeroMQ TCP sockets without allowed_clients [Tue Aug 9 05:34:42 2022] WARN:init_curve_client_socket:2120: ZeroMQ TCP client socket running in insecure mode 2022-08-09 05:34:42,501 : INFO : {} : root : [subscriber.py] :start : in line : [35] : truckStatus Running... [Tue Aug 9 05:34:42 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:34:42 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode 2022-08-09 05:34:42,509 : INFO : {} : root : [visual_alerts.py] :start : in line : [27] : Running... [Tue Aug 9 05:34:42 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode 2022-08-09 05:34:42,513 : INFO : {} : root : [driving_mode_status.py] :start : in line : [25] : Running... 2022-08-09 05:34:42,519 : INFO : {} : root : [base_visualizer.py] :start : in line : [526] : Running... (python3:18): dbind-WARNING **: 05:34:43.498: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-Om4iAkHDqv: Connection refused [Tue Aug 9 05:34:43 2022] WARN:base_recv:1653: Error occurred on ZMQ socket, however, queue still has messages, returning from internal ZMQ queue Gtk-Message: 05:34:43.521: Failed to load module "canberra-gtk-module" Gtk-Message: 05:34:43.522: Failed to load module "canberra-gtk-module" (python3:18): Gdk-ERROR **: 05:34:43.940: The program 'python3' received an X Window System error. This probably reflects a bug in the program. The error was 'BadValue (integer parameter out of range for operation)'. (Details: serial 270 error_code 2 request_code 130 (MIT-SHM) minor_code 5) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the GDK_SYNCHRONIZE environment variable to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) ./visualizer_start.sh: line 16: 18 Trace/breakpoint trap (core dumped) python3 main.py [setupvars.sh] OpenVINO environment initialized [Tue Aug 9 05:39:45 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:39:45 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:39:45 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:39:45 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:39:45 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:39:45 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:39:45 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:39:45 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:39:45 2022] WARN:get_config_value:204: JSON does not contain key: zmq_recv_hwm [Tue Aug 9 05:39:45 2022] WARN:get_config_value:204: JSON does not contain key: zmq_recv_hwm [Tue Aug 9 05:39:45 2022] WARN:zap_initialize:205: Running ZeroMQ TCP sockets without allowed_clients [Tue Aug 9 05:39:45 2022] WARN:init_curve_client_socket:2120: ZeroMQ TCP client socket running in insecure mode 2022-08-09 05:39:45,790 : INFO : {} : root : [subscriber.py] :start : in line : [35] : visual Running... [Tue Aug 9 05:39:45 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:39:45 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:39:45 2022] WARN:zap_initialize:205: Running ZeroMQ TCP sockets without allowed_clients [Tue Aug 9 05:39:45 2022] WARN:init_curve_client_socket:2120: ZeroMQ TCP client socket running in insecure mode 2022-08-09 05:39:45,800 : INFO : {} : root : [subscriber.py] :start : in line : [35] : ALPR_camera1 Running... 2022-08-09 05:39:45,800 : INFO : {} : root : [subscriber.py] :start : in line : [35] : truckStatus Running... [Tue Aug 9 05:39:45 2022] WARN:get_config_value:204: JSON does not contain key: zmq_recv_hwm [Tue Aug 9 05:39:45 2022] WARN:zap_initialize:205: Running ZeroMQ TCP sockets without allowed_clients [Tue Aug 9 05:39:45 2022] WARN:init_curve_client_socket:2120: ZeroMQ TCP client socket running in insecure mode [Tue Aug 9 05:39:45 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:39:45 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 05:39:45 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode 2022-08-09 05:39:45,809 : INFO : {} : root : [visual_alerts.py] :start : in line : [27] : Running... 2022-08-09 05:39:45,813 : INFO : {} : root : [driving_mode_status.py] :start : in line : [25] : Running... 2022-08-09 05:39:45,814 : INFO : {} : root : [base_visualizer.py] :start : in line : [526] : Running... 2022-08-09 05:39:46,265 : INFO : {} : root : [driving_mode_status.py] :start : in line : [32] : New driving mode received: {'cargo': 1, 'engine': 1, 'gps': {'longitude': 0, 'speed': 0, 'latitude': 0}, 'driving_mode': 'Parking', 'driver_name': 'Tomas', 'service': 'truckStatus'} (python3:18): dbind-WARNING **: 05:39:46.951: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-Om4iAkHDqv: Connection refused [Tue Aug 9 05:39:46 2022] WARN:base_recv:1653: Error occurred on ZMQ socket, however, queue still has messages, returning from internal ZMQ queue Gtk-Message: 05:39:46.974: Failed to load module "canberra-gtk-module" Gtk-Message: 05:39:46.975: Failed to load module "canberra-gtk-module" (python3:18): Gdk-ERROR **: 05:39:47.235: The program 'python3' received an X Window System error. This probably reflects a bug in the program. The error was 'BadValue (integer parameter out of range for operation)'. (Details: serial 270 error_code 2 request_code 130 (MIT-SHM) minor_code 5) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the GDK_SYNCHRONIZE environment variable to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) ./visualizer_start.sh: line 16: 18 Trace/breakpoint trap (core dumped) python3 main.py [setupvars.sh] OpenVINO environment initialized [Tue Aug 9 23:17:58 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 23:17:58 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 23:17:58 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 23:17:58 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 23:17:58 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 23:17:58 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 23:17:58 2022] WARN:get_config_value:204: JSON does not contain key: zmq_recv_hwm [Tue Aug 9 23:17:58 2022] WARN:zap_initialize:205: Running ZeroMQ TCP sockets without allowed_clients [Tue Aug 9 23:17:58 2022] WARN:init_curve_client_socket:2120: ZeroMQ TCP client socket running in insecure mode 2022-08-09 23:17:58,577 : INFO : {} : root : [subscriber.py] :start : in line : [35] : ALPR_camera1 Running... [Tue Aug 9 23:17:58 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 23:17:58 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 23:17:58 2022] WARN:get_config_value:204: JSON does not contain key: zmq_recv_hwm [Tue Aug 9 23:17:58 2022] WARN:zap_initialize:205: Running ZeroMQ TCP sockets without allowed_clients [Tue Aug 9 23:17:58 2022] WARN:init_curve_client_socket:2120: ZeroMQ TCP client socket running in insecure mode 2022-08-09 23:17:58,581 : INFO : {} : root : [subscriber.py] :start : in line : [35] : visual Running... [Tue Aug 9 23:17:58 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 23:17:58 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 23:17:58 2022] WARN:get_config_value:204: JSON does not contain key: zmq_recv_hwm [Tue Aug 9 23:17:58 2022] WARN:zap_initialize:205: Running ZeroMQ TCP sockets without allowed_clients [Tue Aug 9 23:17:58 2022] WARN:init_curve_client_socket:2120: ZeroMQ TCP client socket running in insecure mode [Tue Aug 9 23:17:58 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode [Tue Aug 9 23:17:58 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode 2022-08-09 23:17:58,585 : INFO : {} : root : [subscriber.py] :start : in line : [35] : truckStatus Running... 2022-08-09 23:17:58,589 : INFO : {} : root : [visual_alerts.py] :start : in line : [27] : Running... [Tue Aug 9 23:17:58 2022] INFO:EtcdClient:48: Initialize EtcdClient in Dev mode 2022-08-09 23:17:58,591 : INFO : {} : root : [driving_mode_status.py] :start : in line : [25] : Running... 2022-08-09 23:17:58,591 : INFO : {} : root : [base_visualizer.py] :start : in line : [526] : Running... 2022-08-09 23:17:58,770 : INFO : {} : root : [driving_mode_status.py] :start : in line : [32] : New driving mode received: {'cargo': 1, 'engine': 1, 'gps': {'longitude': 0, 'speed': 0, 'latitude': 0}, 'driving_mode': 'Parking', 'driver_name': 'Tomas', 'service': 'truckStatus'} (python3:18): dbind-WARNING **: 23:17:59.654: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-Om4iAkHDqv: Connection refused Gtk-Message: 23:17:59.682: Failed to load module "canberra-gtk-module" Gtk-Message: 23:17:59.684: Failed to load module "canberra-gtk-module" [Tue Aug 9 23:17:59 2022] WARN:base_recv:1653: Error occurred on ZMQ socket, however, queue still has messages, returning from internal ZMQ queue (python3:18): Gdk-ERROR **: 23:17:59.932: The program 'python3' received an X Window System error. This probably reflects a bug in the program. The error was 'BadValue (integer parameter out of range for operation)'. (Details: serial 270 error_code 2 request_code 130 (MIT-SHM) minor_code 5) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the GDK_SYNCHRONIZE environment variable to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) ./visualizer_start.sh: line 16: 18 Trace/breakpoint trap (core dumped) python3 main.py