_ЫnЭall PPI: AmiDebugService
Install PPI: EfiPeiRscHandler
Install PPI: EfiPeiStatusCode
CalculateFfsCheckSum8: AE
AplFakeCapsulePei.Entry(FEF10224)
CalculateFfsCheckSum8: FE
CalculateFfsCheckSum8: FE
PcdPeim.Entry(FEF5EE58)
CalculateFfsCheckSum8: 40
Install PPI: Pcd
Install PPI: EfiPeiPcd
CalculateFfsCheckSum8: 40
CapsulePei.Entry(FEF72F3C)
CalculateFfsCheckSum8: 67
Install PPI: EfiPeiCapsule
CalculateFfsCheckSum8: 67
AplPreMemNvram.Entry(FEF74594)
CalculateFfsCheckSum8: 71
SPI FLREG1 base = 0x1000
SPI FLREG1 limit = 0x6FE000
 NvramAddress:67FFFF7F from CMOS
Install PPI: EfiPeiReadOnlyVariable2
CalculateFfsCheckSum8: 71
PlatformInitPreMem.Entry(FEF46D14)
CalculateFfsCheckSum8: E9
GdtDscriptor Base Address:0xFEFC5F44
Install PPI: SeCUma
SC CreateConfigBlocks
TotalBlockCount = 0x2
TotalBlockSize after adding Block[0x0]= 0x50
TotalBlockSize after adding Block[0x1]= 0x6C
ConfigBlock GUID: D5403298-1BCA-46BC-976C-875C2605062C at address : 0xFEFC7E78
AvailableBlocks: 1 / AvailableSize: 0x22 bytes
PciePreMemConfig->Header.Guid = D5403298-1BCA-46BC-976C-875C2605062C
PciePreMemConfig->Header.Size = 0x50
ConfigBlock GUID: F28A9E1B-9D1B-4299-99A7-E147518670FE at address : 0xFEFC7EC8
AvailableBlocks: 0 / AvailableSize: 0x6 bytes
LpcPreMemConfig->Header.Guid = F28A9E1B-9D1B-4299-99A7-E147518670FE
LpcPreMemConfig->Header.Size = 0x1C
--- SC Print PreMem Policy Start ---
--- PCIe Config ---
 RootPort[0] PERST = C50568
 RootPort[1] PERST = C50578
 RootPort[2] PERST = C705B0
 RootPort[3] PERST = 0
 RootPort[4] PERST = C50628
 RootPort[5] PERST = 0
 StartTimerTickerOfPerstAssert = 6
--- LPC Config ---
 EnhancePort8xhDecoding = 1
--- SC Print PreMem Policy End ---
Install PPI: ScPreMemPolicy
------------------------ Silicon Print Policy Start ------------------------
 Revision= 2
 EcPresent= 0
 TempPciBusMin= 2
 TempPciBusMax= 6
 TempMemBaseAddr= FE600000
 TempMemSize= 200000
 TempIoBaseAddr= D000
 TempIoSize= 10
------------------------ Silicon Print Policy End --------------------------
Locate Old gSiPolicyPpiGuid fail in Post-Memory
Install PPI: SiPolicy
CarMap Address:0xFEFC5970
Warning: PcdIafwPlatformInfo set to Safe_Warning_Value
PcdIafwPlatformInfo:0xFF00  PlatID:0x0
BoardId:  [0x00000002]
BoardRev: [0x00000000]
BomIdPss: [0x00000000]
OsSelPss: [0x00000000]
DockId:   [0x00000000]
Checking FitHeader at 0xFEFC6000
FitHeader signature verified.
Searching for SMIP Entry in FIT...
Found the entry for MRC Training Data in FIT. Checking if data is present...
Training data not found. This is considered a first boot.

Found SMIP Entry in FIT.
SMIP table located at: 0xFFFE0000
SMIP table size = 0x00002D3C bytes
Searching SMIP Header for IAFW entry...
Found IAFW SMIP Block at 0x00001AEA
IafwSmipLayout->IafwSmipSignature = 0xDEEDBEAF
Using smip platform override: 255
MrdBoardID=1
Using smip data for DRAM policy
Install PPI: DramPolicy
Retrieving BIOS knobs from SMIP
Unable to load Setup data. This will occur on first boot.
 BOM ID is 0
  PlatformBOMValue PanelSel is 1
  PlatformBOMValue WorldCameraSel is 1
  PlatformBOMValue UserCameraSel is 1
  PlatformBOMValue AudioSel is 1
  PlatformBOMValue ModemSel is 2
  PlatformBOMValue TouchSel is 1
  PlatformBOMValue WifiSel is 0
  OS Selection ID is 0
  PlatformFeatureValue OsSelection is 0
  PlatformFeatureValue Vibrator is 1
  PlatformFeatureValue Ssic1Support is 0
  PlatformFeatureValue ScUsbOtg is 0
  GpioSmipInit() entry
 GpioSmipInit() end
PatchInfo:  0x00000038 00000000
PEIM UpdateBootMode Enter:
PEIM UpdateBootMode Enter: Set Boot With Default Setting Mode
Install PPI: PeiMfgMemoryTest
TotalBlockCount = 0x2
TotalBlockSize after adding  Block[0x0]= 0x1F
TotalBlockSize after adding  Block[0x1]= 0x4D
TotalBlockSize Final = 0x4D
ConfigBlock GUID: 7200EEF0-BE7F-4061-93E3-3CD0367CE151 at address : 0xFEFD3FA0
AvailableBlocks: 1 / AvailableSize: 0x2E bytes
ConfigBlock GUID: 4F822AB6-EFB7-4C0B-BA75-5298CE28AD99 at address : 0xFEFD3FBF
AvailableBlocks: 0 / AvailableSize: 0x0 bytes
LoadNpkPreMemDefault started
Begin UpdateNpkPreMemPolicy
Install PPI: SiSaPreMemPolicy
Setup Variable is not ready for SSC setting! Used default value!!
HSSIO : Default value of LCPLL_CTRL_1 register: 0x0
 LCPLL_CTRL_2 register: 0x7D9C12B

HSSIO : Setup Variable is not ready for SSC setting! Leave the default system HSSIO SSC settings!!
Install PPI: BiosReservedMemoryPolicy
AcpiVariableAddr : 0xA55AA55A
IBBROBBBase[0] :5AA55AA5
IBBROBBBase[1] :5AA55AA5
PeiInitPlatform end
CalculateFfsCheckSum8: E9
BiosReservedMemoryInit.Entry(FEF125EC)
CalculateFfsCheckSum8: 29
BiosReservedMemoryInitEntry() - Start
SystemConfiguration.Pram = A
BiosReservedMemoryHob->Pram = 30
BiosReservedMemoryInitEntry() - End
CalculateFfsCheckSum8: 29
SiInitPreMem.Entry(FEF12EAC)
CalculateFfsCheckSum8: 1B
SiInitPrePolicy() Start
ScInitPrePolicy() - Start
ScInitPreMem() - Start
ScEarlyInit() - Start
ScSmbusInit() Start
ScSmbusInit() End
ConfigureLpcOnEarlyPei()
ScEarlyInit() - End
ScInitPreMem() - End
ScInitPrePolicy() - End
ScConfigurePciePowerSequence ()
PerstDelayTime = -333 ms
Disabling PCIE RP 3/5
Pre-Mem North Cluster Entry
PeiNpkInit() - Start
NpkReserveHob->NpkPreMemConfig.NpkEn = 0x0
NpkReserveHob->NpkPreMemConfig.NpkVrcTapEn = 0x0
NpkReserveHob->NpkPreMemConfig.FwTraceEn = 0x1
NpkReserveHob->NpkPreMemConfig.RecoverDump = 0x0
NpkReserveHob->NpkPreMemConfig.FwTraceDestination = 0x4
NpkReserveHob->NpkPreMemConfig.Msc0Size = 0x0
NpkReserveHob->NpkPreMemConfig.Msc0Wrap = 0x0
NpkReserveHob->NpkPreMemConfig.Msc1Size = 0x0
NpkReserveHob->NpkPreMemConfig.Msc1Wrap = 0x0
NpkReserveHob->NpkPreMemConfig.PtiMode = 0x1
NpkReserveHob->NpkPreMemConfig.PtiTraining = 0x0
NpkReserveHob->NpkPreMemConfig.PtiSpeed = 0x2
NpkReserveHob->NpkPreMemConfig.PunitMlvl = 0x1
NpkReserveHob->NpkPreMemConfig.PmcMlvl = 0x1
NpkReserveHob->NpkPreMemConfig.SwTraceEn = 0x0
NpkReserveHob->NpkPreMemConfig.NpkDCIEn = 0x0
CSE Host_Secboot_0 value 0x0
Disable NPK by sending IPC1 message.
SaPreMemConfig->RtEn 0
Initializing Pre-Mem Graphics
iGFX initialization Start
IGD enabled.
GMSData: 0x2
iGFX initialization End
Pre-Mem North Cluster Exit
BuildBistHob entry
BIST for BSP passed
BuildBistHob end
SiInitPrePolicy() - End
CalculateFfsCheckSum8: 1B
MemoryInit.Entry(FEF174FC)
CalculateFfsCheckSum8: 85
MRC GetBootMode 4
Profile is now set to: 6
ISH MMIO offset 0x1D0 to set bits[5:0] to 0x3F after write: 3F
Checking if the SPI flash descriptor security override pin-strap is set.
SPI FDO is not set.
HeciPciWrite32
HeciPciRead32(R_SEC_DevID_VID)=5A9A8086
HeciPciRead32(HECI_BAR0)=4
HeciPciRead32(HECI_BAR1)=0
HeciPciRead32(HECI_BAR0)=D3708004
HeciPciRead32(HECI_BAR1)=0
Heci2PciWrite32
Heci2PciRead32(R_SEC_DevID_VID)=5A9C8086
Heci2PciRead32(HECI_BAR0)=4
Heci2PciRead32(HECI_BAR1)=0
Heci2PciRead32(HECI_BAR0)=D3709004
Heci2PciRead32(HECI_BAR1)=0
HeciPciRead32(HECI_BAR0)=FFFFF004
HeciPciRead32(HECI_BAR1)=FFFFFFFF
HeciPciRead32(HECI_BAR0)=D3708004
HeciPciRead32(HECI_BAR1)=0
Heci2PciRead32(HECI_BAR0)=FFFFF004
Heci2PciRead32(HECI_BAR1)=FFFFFFFF
Heci2PciRead32(HECI_BAR0)=D3709004
Heci2PciRead32(HECI_BAR1)=0
SEC UMA Size Requested: 0
MRC SeCUmaSize memory size from SeC ... 0
BXTP-B1 detected!
CPU stepping = 81.
BXT Series = 3.
 SKPD: 0x00000000 DEBUP: 0x00000000
MRC Parameters not valid. Status is Success
MaxTolud:FF
CP 00
MRC REVISION ID 0.56.41
+ MMRC REVISION ID 89.24
DRAM Policy:
ChannelHashMask        :0x0
SliceHashMask          :0x0
ChannelsSlicesEnabled  :0x0
ScramblerSupport       :0x1
InterleavedMode        :0x0
MinRefRate2xEnabled    :0x0
DualRankSupportEnabled :0x0
Profile                :0x6
SpdAddress[0]          :0x0
SpdAddress[1]          :0x0
SystemMemorySizeLimit  :0x0
LowMemMaxVal           :0x0
HighMemMaxVal          :0x0
DisableFastBoot        :0x0
RmtMode                :0x0
RmtCheckRun            :0x3
RmtMarginCheckScaleHighThreshold:0xC8
MsgLevelMask           :0x0
MemoryDown             :0x1
Channel0:
RankEnable             :0x1
DeviceWidth            :0x1
DramDensity            :0x2
Option                 :0x3
OdtConfig              :0x1
TristateClk1           :0x0
Mode2N                 :0x0
OdtLevels              :0x0
Swizzling:
 2  5  1  0  7  3  6  4 12 17 13 16 15 11 10 14  F  E  C  8  B  A  9  D 1A 1F 1C 19 18 1E 1B 1D
Channel1:
RankEnable             :0x1
DeviceWidth            :0x1
DramDensity            :0x2
Option                 :0x3
OdtConfig              :0x1
TristateClk1           :0x0
Mode2N                 :0x0
OdtLevels              :0x0
Swizzling:
 3  2  5  1  0  6  7  4 12 14 10 13 17 15 11 16 18 1F 1D 1C 1E 1A 1B 19  9  A  F  D  8  E  C  B
Channel2:
RankEnable             :0x1
DeviceWidth            :0x1
DramDensity            :0x2
Option                 :0x3
OdtConfig              :0x1
TristateClk1           :0x0
Mode2N                 :0x0
OdtLevels              :0x0
Swizzling:
16 10 11 14 17 13 12 15  4  5  3  0  6  7  2  1  D  F  B  A  8  C  E  9 1F 1D 1C 19 1B 18 1A 1E
Channel3:
RankEnable             :0x1
DeviceWidth            :0x1
DramDensity            :0x2
Option                 :0x3
OdtConfig              :0x1
TristateClk1           :0x0
Mode2N                 :0x0
OdtLevels              :0x0
Swizzling:
 4  2  7  6  5  1  0  3 14 10 11 15 17 12 16 13  9  E  F  B  D  8  C  A 1C 1A 1B 1F 1E 1D 19 18
CP 01
CP 02
CP F1
CP 03
CP 04
CP 05
CP 07
CP 08
CP 09
CP 0B
CP 10
CP 11
CP 12
CP 13
CP 14
CP 15
CP 16
CP 17
CP 18
CP 19
CP 20
CP 21
CP 22
CP 23
CP 24
CP 26
CP 27
CP 28
CP 30
CP 31
CP 36
CP 36
CP F1
CP 39
CP 3C
CP 3D
CP 3F
CP 40
CP 41
CP F1
CP 43
CP 47
CP 44
CP 49
CP 4A
CP F1
CP 4B
CP 4C
CP C0
CP 4E
CP 4F
CP 4F
CP A0
CP 50
CP 51
CP F1
CP A2
CP 56
CP B2
CP 69
CP 6A
CP A5
CP 0xA5, Status[0]
In a Dead Loop: Acting Dead!