i[08:15:04]root@debian[[4009:4 CPU1] 4.14.20-HRN09]:/opt/Maltese/SystemReleases# ethtool eth0
Settings for eth0:
	Supported ports: [ FIBRE ]
	Supported link modes:   Not reported
	Supported pause frame use: Symmetric
	Supports auto-negotiation: Yes
	Advertised link modes:  Not reported
	Advertised pause frame use: No
	Advertised auto-negotiation: Yes
	Speed: 1000Mb/s
	Duplex: Full
	Port: Other
	PHYAD: 0
	Transceiver: internal
	Auto-negotiation: on
	Supports Wake-on: umbg
	Wake-on: g
	Current message level: 0x00000007 (7)
			       drv probe link
	Link detected: yes


[08:15:32]root@debian[[4009:4 CPU1] 4.14.20-HRN09]:/opt/Maltese/SystemReleases# ethtool eth1
Settings for eth1:
	Supported ports: [ FIBRE ]
	Supported link modes:   Not reported
	Supported pause frame use: Symmetric
	Supports auto-negotiation: Yes
	Advertised link modes:  Not reported
	Advertised pause frame use: Symmetric
	Advertised auto-negotiation: Yes
	Speed: 1000Mb/s
	Duplex: Full
	Port: FIBRE
	PHYAD: 0
	Transceiver: internal
	Auto-negotiation: on
	Supports Wake-on: pumbg
	Wake-on: g
	Current message level: 0x00000007 (7)
			       drv probe link
	Link detected: yes

drivers versions:
[08:15:44]root@debian[[4009:4 CPU1] 4.14.20-HRN09]:/opt/Maltese/SystemReleases# ethtool -i eth0
driver: ixgbe
version: 5.1.0-k
firmware-version: 0x800008d0
bus-info: 0000:01:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes

[08:16:14]root@debian[[4009:4 CPU1] 4.14.20-HRN09]:/opt/Maltese/SystemReleases# ethtool -i eth1
driver: igb
version: 5.4.0-k
firmware-version: 3.25, 0x800005da
bus-info: 0000:04:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes