Dec 04, 2022 8:11:11 AM com.intel.bts.BtsView INFO: Board version: Rev D, chip version: LTES Dec 04, 2022 8:11:12 AM com.intel.bts.ClientApp attachServer INFO: [E:\intelFPGA_pro\18.0\quartus/sopc_builder/bin/system-console, --server] Dec 04, 2022 8:11:13 AM com.intel.bts.ClientApp attachServer INFO: Here is the standard output of the command: Dec 04, 2022 8:11:17 AM com.intel.bts.ClientApp attachServer INFO: TCP PORT: 60714 Dec 04, 2022 8:11:25 AM com.intel.bts.JtagInfo createDeviceInfoMapArray INFO: 2 device detected: /devices/1SG280HH(1S2|2S2|3S2)|..@2#USB-1 /devices/5M(1270ZF324|2210Z)|EPM2210@1#USB-1 Dec 04, 2022 8:11:25 AM com.intel.bts.ClientApp getMatchedBoardInfoArray INFO: System Max matched: true, Fpga matched: true Dec 04, 2022 8:11:25 AM com.intel.bts.BtsView startMainStage INFO: Selected JTAG cable is: USB-BlasterII on localhost (USB-1) Dec 04, 2022 8:11:25 AM com.intel.bts.BtsView startMainStage INFO: System MAX on index 1, FPGA device on index 2 Dec 04, 2022 8:11:25 AM com.intel.bts.SysConService INFO: Claim master service succeed! Service path: "/devices/5M(1270ZF324|2210Z)|EPM2210@1#USB-1/(link)/JTAG/(110:130 v3 #0)/jtagmem_0", claimed path: /channels/remote1/(lib)/master_1. Dec 04, 2022 8:11:28 AM com.intel.bts.ClientApp getCableIndex INFO: 1) USB-BlasterII [USB-1] Dec 04, 2022 8:11:28 AM com.intel.bts.InstanceChecker registerInstance INFO: Application Register. Type: Board Test System GUI Dec 04, 2022 8:11:28 AM com.intel.bts.SysConService INFO: Claim master service succeed! Service path: "/devices/5M(1270ZF324|2210Z)|EPM2210@1#USB-1/(link)/JTAG/(110:130 v3 #0)/jtagmem_0", claimed path: /channels/remote1/(lib)/master_2. Dec 04, 2022 8:11:29 AM com.intel.bts.SysInfo init INFO: Claim sysinfo master service. Dec 04, 2022 8:11:29 AM com.intel.bts.SysConService INFO: Claim master service succeed! Service path: "/devices/5M(1270ZF324|2210Z)|EPM2210@1#USB-1/(link)/JTAG/(110:130 v3 #0)/jtagmem_0", claimed path: /channels/remote1/(lib)/master_3. Dec 04, 2022 8:11:29 AM com.intel.bts.DesignDetection readFpgaImageType INFO: Claim FPGA master service to read design type. Dec 04, 2022 8:11:29 AM com.intel.bts.SysConService SEVERE: java.io.IOException: Get master service paths failed! Device: "/devices/1SG280HH(1S2|2S2|3S2)|..@2#USB-1" Type: Dec 04, 2022 8:11:29 AM com.intel.bts.SysConService INFO: Claim master service succeed! Service path: "/devices/1SG280HH(1S2|2S2|3S2)|..@2#USB-1/(link)/JTAG/(70:34 v3 #0)/nios2_0", claimed path: /channels/remote1/(lib)/master_4. Dec 04, 2022 8:11:29 AM com.intel.bts.SysConService closeService INFO: close_service master "/channels/remote1/(lib)/master_4" Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: [E:\intelFPGA_pro\18.0\quartus/bin64/nios2-terminal, -c, 1, -d, 2, --quit-after=5] Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: nios2-terminal: connected to hardware target using JTAG UART on cable Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: nios2-terminal: "USB-BlasterII [USB-1]", device 2, instance 0 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: nios2-terminal: (Use the IDE stop button or Ctrl-C to terminate) Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: PHY INFO: [phyid] 0x0 0x141 0xcc2 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: PHY INFO: waiting on PHY link... Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: PHY INFO: PHY link detected, allowing network to start. Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: WS INFO: Connecting... Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: InterNiche Portable TCP/IP, v3.1 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Copyright 1996-2008 by InterNiche Technologies. All rights reserved. Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: prep_tse_mac 0 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Your Ethernet MAC address is 00:07:ed:2e:12:34 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: prepped 1 interface, initializing... Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: tse_mac_init 0 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: List of PHY profiles supported (Total profiles = 4)... Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Profile No. 0 : Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: PHY Name : Marvell 88E1111 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: PHY OUI : 0x005043 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: PHY Model Num. : 0x0c Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: PHY Rev. Num. : 0x02 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Status Register : 0x11 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Speed Bit : 14 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Duplex Bit : 13 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Link Bit : 10 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Profile No. 1 : Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: PHY Name : Marvell Quad PHY 88E1145 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: PHY OUI : 0x005043 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: PHY Model Num. : 0x0d Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: PHY Rev. Num. : 0x02 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Status Register : 0x11 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Speed Bit : 14 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Duplex Bit : 13 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Link Bit : 10 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Profile No. 2 : Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: PHY Name : National DP83865 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: PHY OUI : 0x080017 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: PHY Model Num. : 0x07 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: PHY Rev. Num. : 0x0a Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Status Register : 0x11 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Speed Bit : 3 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Duplex Bit : 1 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Link Bit : 2 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Profile No. 3 : Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: PHY Name : National DP83848C Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: PHY OUI : 0x080017 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: PHY Model Num. : 0x09 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: PHY Rev. Num. : 0x00 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Status Register : 0x00 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Speed Bit : 0 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Duplex Bit : 0 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Link Bit : 0 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : TSE MAC 0 found at address 0x10020000 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : Multi Channel = No Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : MDIO Shared = No Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : MAC Type = 10/100/1000 Ethernet MAC Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : PCS Enable = Yes Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : PCS SGMII Enable = Yes Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : MAC Address = 0x10020000 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : MAC Device = tse_mac_device[0] Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : PHY Marvell 88E1111 found at PHY address 0x00 of MAC Group[0] Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : PHY OUI = 0x005043 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : PHY Model Number = 0x0c Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : PHY Revision Number = 0x2 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : PHY[0.0] - Automatically mapped to tse_mac_device[0] Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : PHY[0.0] - Advertisement of 1000 Base-T Full Duplex set to 1 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : PHY[0.0] - Advertisement of 1000 Base-T Half Duplex set to 1 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : PHY[0.0] - Advertisement of 100 Base-T4 set to 0 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : PHY[0.0] - Advertisement of 100 Base-TX Full Duplex set to 1 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : PHY[0.0] - Advertisement of 100 Base-TX Half Duplex set to 1 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : PHY[0.0] - Advertisement of 10 Base-TX Full Duplex set to 1 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : PHY[0.0] - Advertisement of 10 Base-TX Half Duplex set to 1 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : PHY[0.0] - Restart Auto-Negotiation, checking PHY link... Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : PHY[0.0] - Auto-Negotiation PASSED Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : Applying additional PHY configuration of Marvell 88E1111 Dec 04, 2022 8:11:29 AM com.intel.bts.CommandShell getBupPrint INFO: Dec 04, 2022 8:11:30 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : PCS[0.0] - Configuring PCS operating mode Dec 04, 2022 8:11:30 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : PCS[0.0] - PCS SGMII mode enabled Dec 04, 2022 8:11:30 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : PHY[0.0] - Checking link... Dec 04, 2022 8:11:30 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : PHY[0.0] - Link established Dec 04, 2022 8:11:30 AM com.intel.bts.CommandShell getBupPrint INFO: INFO : PHY[0.0] - Speed = 1000, Duplex = Full Dec 04, 2022 8:11:30 AM com.intel.bts.CommandShell getBupPrint INFO: OK, x=0, CMD_CONFIG=0x00000000 Dec 04, 2022 8:11:30 AM com.intel.bts.CommandShell getBupPrint INFO: Dec 04, 2022 8:11:30 AM com.intel.bts.CommandShell getBupPrint INFO: MAC post-initialization: CMD_CONFIG=0x0400020b Dec 04, 2022 8:11:30 AM com.intel.bts.CommandShell getBupPrint INFO: [tse_msgdma_read_init] RX descriptor chain desc (2 depth) created Dec 04, 2022 8:11:30 AM com.intel.bts.CommandShell getBupPrint INFO: mctest init called Dec 04, 2022 8:11:30 AM com.intel.bts.CommandShell getBupPrint INFO: IP address of et1 : 0.0.0.0 Dec 04, 2022 8:11:30 AM com.intel.bts.CommandShell getBupPrint INFO: Created "Inet main" task (Prio: 2) Dec 04, 2022 8:11:30 AM com.intel.bts.CommandShell getBupPrint INFO: Created "clock tick" task (Prio: 3) Dec 04, 2022 8:11:30 AM com.intel.bts.CommandShell getBupPrint INFO: Acquired IP address via DHCP client for interface: et1 Dec 04, 2022 8:11:30 AM com.intel.bts.CommandShell getBupPrint INFO: IP address : 192.168.1.26 Dec 04, 2022 8:11:42 AM com.intel.bts.BtsViewController menuItemFactoryRestoreOnAction CONFIG: [Event -- menuItemFactoryRestore On Action] Dec 04, 2022 8:12:19 AM com.intel.bts.FactoryRestoreController buttonCloseOnAction CONFIG: [Restore Event -- buttonClose clicked] Dec 04, 2022 8:12:21 AM com.intel.bts.BtsViewController menuItemFactoryRestoreOnAction CONFIG: [Event -- menuItemFactoryRestore On Action] Dec 04, 2022 8:12:35 AM com.intel.bts.FactoryRestoreController buttonRestoreOnAction CONFIG: [Restore Event -- buttonRestore clicked] Dec 04, 2022 8:12:35 AM com.intel.bts.SysConService closeService INFO: close_service master "/channels/remote1/(lib)/master_1" Dec 04, 2022 8:12:35 AM com.intel.bts.SysConService closeService INFO: close_service master "/channels/remote1/(lib)/master_2" Dec 04, 2022 8:12:35 AM com.intel.bts.SysConService closeService INFO: close_service master "/channels/remote1/(lib)/master_3" Dec 04, 2022 8:12:35 AM com.intel.bts.CommandShell runProgram INFO: [E:\intelFPGA_pro\18.0\quartus/bin64/quartus_pgm, -c, 1, -m, JTAG, -o, P;image/LTES/bts_dummy.sof@2] Dec 04, 2022 8:12:51 AM com.intel.bts.CommandShell runProgram INFO: Info: ******************************************************************* Dec 04, 2022 8:12:51 AM com.intel.bts.CommandShell runProgram INFO: Info: Running Quartus Prime Programmer Dec 04, 2022 8:12:51 AM com.intel.bts.CommandShell runProgram INFO: Info: Version 18.0.0 Build 219 04/25/2018 SJ Pro Edition Dec 04, 2022 8:12:51 AM com.intel.bts.CommandShell runProgram INFO: Info: Copyright (C) 2018 Intel Corporation. All rights reserved. Dec 04, 2022 8:12:51 AM com.intel.bts.CommandShell runProgram INFO: Info: Your use of Intel Corporation's design tools, logic functions Dec 04, 2022 8:12:51 AM com.intel.bts.CommandShell runProgram INFO: Info: and other software and tools, and its AMPP partner logic Dec 04, 2022 8:12:51 AM com.intel.bts.CommandShell runProgram INFO: Info: functions, and any output files from any of the foregoing Dec 04, 2022 8:12:51 AM com.intel.bts.CommandShell runProgram INFO: Info: (including device programming or simulation files), and any Dec 04, 2022 8:12:51 AM com.intel.bts.CommandShell runProgram INFO: Info: associated documentation or information are expressly subject Dec 04, 2022 8:12:51 AM com.intel.bts.CommandShell runProgram INFO: Info: to the terms and conditions of the Intel Program License Dec 04, 2022 8:12:51 AM com.intel.bts.CommandShell runProgram INFO: Info: Subscription Agreement, the Intel Quartus Prime License Agreement, Dec 04, 2022 8:12:51 AM com.intel.bts.CommandShell runProgram INFO: Info: the Intel FPGA IP License Agreement, or other applicable license Dec 04, 2022 8:12:51 AM com.intel.bts.CommandShell runProgram INFO: Info: agreement, including, without limitation, that your use is for Dec 04, 2022 8:12:51 AM com.intel.bts.CommandShell runProgram INFO: Info: the sole purpose of programming logic devices manufactured by Dec 04, 2022 8:12:51 AM com.intel.bts.CommandShell runProgram INFO: Info: Intel and sold by Intel or its authorized distributors. Please Dec 04, 2022 8:12:51 AM com.intel.bts.CommandShell runProgram INFO: Info: refer to the applicable agreement for further details. Dec 04, 2022 8:12:51 AM com.intel.bts.CommandShell runProgram INFO: Info: Processing started: Sun Dec 4 08:12:36 2022 Dec 04, 2022 8:12:51 AM com.intel.bts.CommandShell runProgram INFO: Info: Command: quartus_pgm -c 1 -m JTAG -o P;image/LTES/bts_dummy.sof@2 Dec 04, 2022 8:12:51 AM com.intel.bts.CommandShell runProgram INFO: Info (213045): Using programming cable "USB-BlasterII [USB-1]" Dec 04, 2022 8:12:51 AM com.intel.bts.CommandShell runProgram INFO: Info (213011): Using programming file image/LTES/bts_dummy.sof with checksum 0x3D14F223 for device 1SG280LU2F50@2 Dec 04, 2022 8:12:51 AM com.intel.bts.CommandShell runProgram INFO: Info (209060): Started Programmer operation at Sun Dec 4 08:12:51 2022 Dec 04, 2022 8:12:52 AM com.intel.bts.CommandShell runProgram INFO: Error (18939): Unexpected error in JTAG server: JTAG chain broken Dec 04, 2022 8:12:52 AM com.intel.bts.CommandShell runProgram INFO: Error (209012): Operation failed Dec 04, 2022 8:15:11 AM com.intel.bts.BtsViewController buttonCloseOnAction CONFIG: [Event -- Main window closing]