-- megafunction wizard: %RAM: 1-PORT% -- GENERATION: STANDARD -- VERSION: WM1.0 -- MODULE: altsyncram -- ============================================================ -- File Name: ramlpm.vhd -- Megafunction Name(s): -- altsyncram -- -- Simulation Library Files(s): -- altera_mf -- ============================================================ -- ************************************************************ -- THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE! -- -- 9.1 Build 350 03/24/2010 SP 2 SJ Web Edition -- ************************************************************ LIBRARY ieee; USE ieee.std_logic_1164.all; LIBRARY altera_mf; USE altera_mf.all; ENTITY ramlpm IS PORT ( address : IN STD_LOGIC_VECTOR (4 DOWNTO 0); clock : IN STD_LOGIC := '1'; data : IN STD_LOGIC_VECTOR (7 DOWNTO 0); wren : IN STD_LOGIC ; q : OUT STD_LOGIC_VECTOR (7 DOWNTO 0) ); END ramlpm; ARCHITECTURE SYN OF ramlpm IS SIGNAL sub_wire0 : STD_LOGIC_VECTOR (7 DOWNTO 0); COMPONENT altsyncram GENERIC ( clock_enable_input_a : STRING; clock_enable_output_a : STRING; intended_device_family : STRING; lpm_hint : STRING; lpm_type : STRING; numwords_a : NATURAL; operation_mode : STRING; outdata_aclr_a : STRING; outdata_reg_a : STRING; power_up_uninitialized : STRING; ram_block_type : STRING; widthad_a : NATURAL; width_a : NATURAL; width_byteena_a : NATURAL ); PORT ( wren_a : IN STD_LOGIC ; clock0 : IN STD_LOGIC ; address_a : IN STD_LOGIC_VECTOR (4 DOWNTO 0); q_a : OUT STD_LOGIC_VECTOR (7 DOWNTO 0); data_a : IN STD_LOGIC_VECTOR (7 DOWNTO 0) ); END COMPONENT; BEGIN q <= sub_wire0(7 DOWNTO 0); altsyncram_component : altsyncram GENERIC MAP ( clock_enable_input_a => "BYPASS", clock_enable_output_a => "BYPASS", intended_device_family => "Cyclone II", lpm_hint => "ENABLE_RUNTIME_MOD=NO", lpm_type => "altsyncram", numwords_a => 32, operation_mode => "SINGLE_PORT", outdata_aclr_a => "NONE", outdata_reg_a => "UNREGISTERED", power_up_uninitialized => "FALSE", ram_block_type => "M4K", widthad_a => 5, width_a => 8, width_byteena_a => 1 ) PORT MAP ( wren_a => wren, clock0 => clock, address_a => address, data_a => data, q_a => sub_wire0 ); END SYN; -- ============================================================ -- CNX file retrieval info -- ============================================================ -- Retrieval info: PRIVATE: ADDRESSSTALL_A NUMERIC "0" -- Retrieval info: PRIVATE: AclrAddr NUMERIC "0" -- Retrieval info: PRIVATE: AclrByte NUMERIC "0" -- Retrieval info: PRIVATE: AclrData NUMERIC "0" -- Retrieval info: PRIVATE: AclrOutput NUMERIC "0" -- Retrieval info: PRIVATE: BYTE_ENABLE NUMERIC "0" -- Retrieval info: PRIVATE: BYTE_SIZE NUMERIC "8" -- Retrieval info: PRIVATE: BlankMemory NUMERIC "1" -- Retrieval info: PRIVATE: CLOCK_ENABLE_INPUT_A NUMERIC "0" -- Retrieval info: PRIVATE: CLOCK_ENABLE_OUTPUT_A NUMERIC "0" -- Retrieval info: PRIVATE: Clken NUMERIC "0" -- Retrieval info: PRIVATE: DataBusSeparated NUMERIC "1" -- Retrieval info: PRIVATE: IMPLEMENT_IN_LES NUMERIC "0" -- Retrieval info: PRIVATE: INIT_FILE_LAYOUT STRING "PORT_A" -- Retrieval info: PRIVATE: INIT_TO_SIM_X NUMERIC "0" -- Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "Cyclone II" -- Retrieval info: PRIVATE: JTAG_ENABLED NUMERIC "0" -- Retrieval info: PRIVATE: JTAG_ID STRING "NONE" -- Retrieval info: PRIVATE: MAXIMUM_DEPTH NUMERIC "0" -- Retrieval info: PRIVATE: MIFfilename STRING "" -- Retrieval info: PRIVATE: NUMWORDS_A NUMERIC "32" -- Retrieval info: PRIVATE: RAM_BLOCK_TYPE NUMERIC "2" -- Retrieval info: PRIVATE: READ_DURING_WRITE_MODE_PORT_A NUMERIC "3" -- Retrieval info: PRIVATE: RegAddr NUMERIC "1" -- Retrieval info: PRIVATE: RegData NUMERIC "1" -- Retrieval info: PRIVATE: RegOutput NUMERIC "0" -- Retrieval info: PRIVATE: SYNTH_WRAPPER_GEN_POSTFIX STRING "0" -- Retrieval info: PRIVATE: SingleClock NUMERIC "1" -- Retrieval info: PRIVATE: UseDQRAM NUMERIC "1" -- Retrieval info: PRIVATE: WRCONTROL_ACLR_A NUMERIC "0" -- Retrieval info: PRIVATE: WidthAddr NUMERIC "5" -- Retrieval info: PRIVATE: WidthData NUMERIC "8" -- Retrieval info: PRIVATE: rden NUMERIC "0" -- Retrieval info: CONSTANT: CLOCK_ENABLE_INPUT_A STRING "BYPASS" -- Retrieval info: CONSTANT: CLOCK_ENABLE_OUTPUT_A STRING "BYPASS" -- Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone II" -- Retrieval info: CONSTANT: LPM_HINT STRING "ENABLE_RUNTIME_MOD=NO" -- Retrieval info: CONSTANT: LPM_TYPE STRING "altsyncram" -- Retrieval info: CONSTANT: NUMWORDS_A NUMERIC "32" -- Retrieval info: CONSTANT: OPERATION_MODE STRING "SINGLE_PORT" -- Retrieval info: CONSTANT: OUTDATA_ACLR_A STRING "NONE" -- Retrieval info: CONSTANT: OUTDATA_REG_A STRING "UNREGISTERED" -- Retrieval info: CONSTANT: POWER_UP_UNINITIALIZED STRING "FALSE" -- Retrieval info: CONSTANT: RAM_BLOCK_TYPE STRING "M4K" -- Retrieval info: CONSTANT: WIDTHAD_A NUMERIC "5" -- Retrieval info: CONSTANT: WIDTH_A NUMERIC "8" -- Retrieval info: CONSTANT: WIDTH_BYTEENA_A NUMERIC "1" -- Retrieval info: USED_PORT: address 0 0 5 0 INPUT NODEFVAL address[4..0] -- Retrieval info: USED_PORT: clock 0 0 0 0 INPUT VCC clock -- Retrieval info: USED_PORT: data 0 0 8 0 INPUT NODEFVAL data[7..0] -- Retrieval info: USED_PORT: q 0 0 8 0 OUTPUT NODEFVAL q[7..0] -- Retrieval info: USED_PORT: wren 0 0 0 0 INPUT NODEFVAL wren -- Retrieval info: CONNECT: @address_a 0 0 5 0 address 0 0 5 0 -- Retrieval info: CONNECT: q 0 0 8 0 @q_a 0 0 8 0 -- Retrieval info: CONNECT: @clock0 0 0 0 0 clock 0 0 0 0 -- Retrieval info: CONNECT: @data_a 0 0 8 0 data 0 0 8 0 -- Retrieval info: CONNECT: @wren_a 0 0 0 0 wren 0 0 0 0 -- Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all -- Retrieval info: GEN_FILE: TYPE_NORMAL ramlpm.vhd TRUE -- Retrieval info: GEN_FILE: TYPE_NORMAL ramlpm.inc FALSE -- Retrieval info: GEN_FILE: TYPE_NORMAL ramlpm.cmp TRUE -- Retrieval info: GEN_FILE: TYPE_NORMAL ramlpm.bsf FALSE -- Retrieval info: GEN_FILE: TYPE_NORMAL ramlpm_inst.vhd FALSE -- Retrieval info: GEN_FILE: TYPE_NORMAL ramlpm_waveforms.html TRUE -- Retrieval info: GEN_FILE: TYPE_NORMAL ramlpm_wave*.jpg FALSE -- Retrieval info: LIB_FILE: altera_mf