- Intel SSD 660p Series BTNH921510EC256D -

AggregationThreshold : This feature cannot be ran with the current driver. Try installing the Intel NVMe driver and run the feature again.
AggregationTime : This feature cannot be ran with the current driver. Try installing the Intel NVMe driver and run the feature again.
ArbitrationBurst : 6
BusType : 8
CoalescingDisable : 1
ConfigID : a1UB_256
ControllerCompatibleIDs : PCI\VEN_8086&DEV_02D7&REV_00PCI\VEN_8086&DEV_02D7PCI\VEN_8086&CC_010400PCI\VEN_8086&CC_0104PCI\VEN_8086PCI\CC_010400PCI\CC_0104
ControllerDescription : @oem52.inf,%pci\ven_8086&dev_02d7&cc_0104.devicedesc%;Intel(R) Chipset SATA/PCIe RST Premium Controller
ControllerID : PCI\VEN_8086&DEV_02D7&SUBSYS_B1831462&REV_00\3&11583659&1&B8
ControllerIDEMode : False
ControllerManufacturer : @oem52.inf,%intel%;Intel Corporation
ControllerService : iaStorAC
DevicePath : \\.\PHYSICALDRIVE1
DeviceStatus : Healthy
DirectivesSupported : False
DisableThermalThrottle : The selected drive does not support this feature.
DownloadMicrocodePossible : True
DriverDescription : Intel(R) Chipset SATA/PCIe RST Premium Controller
DriverMajorVersion : 17
DriverManufacturer : Intel Corporation
DriverMinorVersion : 9
DriverVersion : 17.9.1.1009
DynamicMMIOEnabled : The selected drive does not support this feature.
EDriveSupported : False
EndToEndDataProtCapabilities : 0
EnduranceAnalyzer : The selected drive does not support this feature.
ErrorString : Value not found
Firmware : 002C
FirmwareActivationNoticesConfiguration : False
FirmwareUpdateAvailable : The selected drive contains current firmware as of this tool release.
FormFactor : M_2
FormatNVMCryptoEraseSupported : True
FormatNVMSupported : True
HighPriorityWeightArbitration : 0
IOCompletionQueuesRequested : 7
IOSubmissionQueuesRequested : 7
Index : 1
Intel : True
IntelGen3SATA : False
IntelNVMe : False
InterruptVector : 0
IsCommandPathNVMeRST : True
IsDualPort : False
LBAFormat : 0
LatencyTrackingEnabled : Device does not support this command set.
LowPriorityWeightArbitration : 0
Lun : 0
MaximumLBA : 500118191
MediumPriorityWeightArbitration : 0
MetadataSetting : 0
MetadataSize : 0
ModelNumber : INTEL SSDPEKNW256G8
NVMe1Point2OrGreater : True
NVMe1Point3OrGreater : True
NVMeControllerID : 1
NVMeMajorVersion : 1
NVMeMinorVersion : 3
NVMePowerState : 0
NVMeTertiaryVersion : 0
NamespaceAttributeNoticesConfiguration : False
NamespaceId : 1
NamespaceManagementSupported : False
NumErrorLogPageEntries : 255
NumLBAFormats : 0
NumberOfNamespacesSupported : 1
OEM : Generic
OpalState : Opal Ready
PLITestTimeInterval : The selected drive does not support this feature.
PNPString : SCSI\DISK&VEN_NVME&PROD_INTEL_SSDPEKNW25\4&5EF6B34&1&030000
PathID : 3
PhyConfig : The selected drive does not support this feature.
PhySpeed : The selected drive does not support this feature.
PhysicalSectorSize : The selected drive does not support this feature.
PhysicalSize : 256060514304
PortNumber : 3
PowerGovernorAveragePower : Device does not support this command set.
PowerGovernorBurstPower : Device does not support this command set.
PowerGovernorMode : Device does not support this command set.
Product : Neptune Harbor
ProductFamily : Intel SSD 660p Series
ProductProtocol : NVME
ProtectionInformation : 0
ProtectionInformationLocation : 0
ReadErrorRecoveryTimer : Device does not support this command set.
SCSIPortNumber : 0
SMARTEnabled : True
SMARTHealthCriticalWarningsConfiguration : 31
SMBusAddress : The selected drive does not support this feature.
SMI : True
SanitizeBlockEraseSupported : True
SanitizeCryptoScrambleSupported : True
SanitizeOverwriteSupported : False
SectorDataSize : 512
SectorSize : 512
SelfTestSupported : True
SerialNumber : BTNH921510EC256D
SupportCommandEffectsLog : True
TCGSupported : True
TargetID : 0
TelemetryLogNoticesConfiguration : False
TelemetryLogSupported : True
TempThreshold : 77
TemperatureLoggingInterval : The selected drive does not support this feature.
TimeLimitedErrorRecovery : 0
TrimSupported : True
Vendor : NVMe
VolatileWriteCacheEnabled : True
WriteAtomicityDisableNormal : 0
WriteCacheReorderingStateEnabled : The selected drive does not support this feature.
WriteCacheState : The selected drive does not support this feature.
WriteErrorRecoveryTimer : Device does not support this command set.