Copyright (C) 1991-2010 Altera Corporation
Your use of Altera Corporation's design tools, logic functions 
and other software and tools, and its AMPP partner logic 
functions, and any output files from any of the foregoing 
(including device programming or simulation files), and any 
associated documentation or information are expressly subject 
to the terms and conditions of the Altera Program License 
Subscription Agreement, Altera MegaCore Function License 
Agreement, or other applicable license agreement, including, 
without limitation, that your use is for the sole purpose of 
programming logic devices manufactured by Altera and sold by 
Altera or its authorized distributors.  Please refer to the 
applicable agreement for further details.

de2 I/O Rules Details

Status	ID	Category	Rule Description	Severity	Information	Area	Extra Information
Pass	IO_000001	Capacity Checks	Number of pins in an I/O bank should not exceed the number of locations available.	Critical	0 such failures found.	I/O	
Inapplicable	IO_000002	Capacity Checks	Number of clocks in an I/O bank should not exceed the number of clocks available.	Critical	No Global Signal assignments found.	I/O	
Pass	IO_000003	Capacity Checks	Number of pins in a Vrefgroup should not exceed the number of locations available.	Critical	0 such failures found.	I/O	
Inapplicable	IO_000004	Voltage Compatibility Checks	The I/O bank should support the requested VCCIO.	Critical	No IOBANK_VCCIO assignments found.	I/O	
Inapplicable	IO_000005	Voltage Compatibility Checks	The I/O bank should not have competing VREF values.	Critical	No VREF I/O Standard assignments found.	I/O	
Pass	IO_000006	Voltage Compatibility Checks	The I/O bank should not have competing VCCIO values.	Critical	0 such failures found.	I/O	
Pass	IO_000007	Valid Location Checks	Checks for unavailable locations.	Critical	0 such failures found.	I/O	
Inapplicable	IO_000008	Valid Location Checks	Checks for reserved locations.	Critical	No reserved LogicLock region found.	I/O	
Pass	IO_000009	I/O Properties Checks for One I/O	The location should support the requested I/O standard.	Critical	0 such failures found.	I/O	
Pass	IO_000010	I/O Properties Checks for One I/O	The location should support the requested I/O direction.	Critical	0 such failures found.	I/O	
Pass	IO_000011	I/O Properties Checks for One I/O	The location should support the requested Current Strength.	Critical	0 such failures found.	I/O	
Inapplicable	IO_000012	I/O Properties Checks for One I/O	The location should support the requested On Chip Termination value.	Critical	No Termination assignments found.	I/O	
Inapplicable	IO_000013	I/O Properties Checks for One I/O	The location should support the requested Bus Hold value.	Critical	No Enable Bus-Hold Circuitry assignments found.	I/O	
Inapplicable	IO_000014	I/O Properties Checks for One I/O	The location should support the requested Weak Pull Up value.	Critical	No Weak Pull-Up Resistor assignments found.	I/O	
Pass	IO_000015	I/O Properties Checks for One I/O	The location should support the requested PCI Clamp Diode.	Critical	0 such failures found.	I/O	
Pass	IO_000018	I/O Properties Checks for One I/O	The I/O standard should support the requested Current Strength.	Critical	0 such failures found.	I/O	
Inapplicable	IO_000019	I/O Properties Checks for One I/O	The I/O standard should support the requested On Chip Termination value.	Critical	No Termination assignments found.	I/O	
Pass	IO_000020	I/O Properties Checks for One I/O	The I/O standard should support the requested PCI Clamp Diode.	Critical	0 such failures found.	I/O	
Inapplicable	IO_000021	I/O Properties Checks for One I/O	The I/O standard should support the requested Weak Pull Up value.	Critical	No Weak Pull-Up Resistor assignments found.	I/O	
Inapplicable	IO_000022	I/O Properties Checks for One I/O	The I/O standard should support the requested Bus Hold value.	Critical	No Enable Bus-Hold Circuitry assignments found.	I/O	
Pass	IO_000023	I/O Properties Checks for One I/O	The I/O standard should support the Open Drain value.	Critical	0 such failures found.	I/O	
Inapplicable	IO_000024	I/O Properties Checks for One I/O	The I/O direction should support the On Chip Termination value.	Critical	No Termination assignments found.	I/O	
Inapplicable	IO_000026	I/O Properties Checks for One I/O	On Chip Termination and Current Strength should not be used at the same time.	Critical	No Termination assignments found.	I/O	
Inapplicable	IO_000027	I/O Properties Checks for One I/O	Weak Pull Up and Bus Hold should not be used at the same time.	Critical	No Enable Bus-Hold Circuitry or Weak Pull-Up Resistor assignments found.	I/O	
Inapplicable	IO_000045	I/O Properties Checks for One I/O	The I/O standard should support the requested Slew Rate value.	Critical	No Slew Rate assignments found.	I/O	
Inapplicable	IO_000046	I/O Properties Checks for One I/O	The location should support the requested Slew Rate value.	Critical	No Slew Rate assignments found.	I/O	
Inapplicable	IO_000047	I/O Properties Checks for One I/O	On Chip Termination and Slew Rate should not be used at the same time.	Critical	No Slew Rate assignments found.	I/O	
Pass	IO_000033	Electromigration Checks	Current density for consecutive I/Os should not exceed 240mA for row I/Os and 240mA for column I/Os.	Critical	0 such failures found.	I/O	
Inapplicable	IO_000034	SI Related Distance Checks	Single-ended outputs should be 5 LAB row(s) away from a differential I/O.	High	No Differential I/O Standard assignments found.	I/O	
Inapplicable	IO_000042	SI Related SSO Limit Checks	No more than 20 outputs are allowed in a VREF group when VREF is being read from.	High	No VREF I/O Standard assignments found.	I/O