Info: Starting: Create simulation model
Info: qsys-generate "C:\Network mirror\Firmware\FW069\Source Files\DE10_Standard_GHRD\soc_system.qsys" --simulation=VERILOG --allow-mixed-language-simulation --output-directory="C:\Network mirror\Firmware\FW069\Source Files\DE10_Standard_GHRD\soc_system\simulation" --family="Cyclone V" --part=5CSXFC6D6F31C6
Progress: Loading DE10_Standard_GHRD/soc_system.qsys
Progress: Reading input file
Progress: Adding ILC [interrupt_latency_counter 18.0]
Progress: Parameterizing module ILC
Progress: Adding button_pio [altera_avalon_pio 18.0]
Progress: Parameterizing module button_pio
Progress: Adding clk_0 [clock_source 18.0]
Progress: Parameterizing module clk_0
Progress: Adding dipsw_pio [altera_avalon_pio 18.0]
Progress: Parameterizing module dipsw_pio
Progress: Adding f2sdram_only_master [altera_jtag_avalon_master 18.0]
Progress: Parameterizing module f2sdram_only_master
Progress: Adding fpga_only_master [altera_jtag_avalon_master 18.0]
Progress: Parameterizing module fpga_only_master
Progress: Adding hps_0 [altera_hps 18.0]
Progress: Parameterizing module hps_0
Progress: Adding hps_only_master [altera_jtag_avalon_master 18.0]
Progress: Parameterizing module hps_only_master
Progress: Adding jtag_uart [altera_avalon_jtag_uart 18.0]
Progress: Parameterizing module jtag_uart
Progress: Adding led_pio [altera_avalon_pio 18.0]
Progress: Parameterizing module led_pio
Progress: Adding mm_bridge_0 [altera_avalon_mm_bridge 18.0]
Progress: Parameterizing module mm_bridge_0
Progress: Adding sysid_qsys [altera_avalon_sysid_qsys 18.0]
Progress: Parameterizing module sysid_qsys
Progress: Building connections
Progress: Parameterizing connections
Progress: Validating
Progress: Done reading input file
Info: soc_system.button_pio: PIO inputs are not hardwired in test bench. Undefined values will be read from PIO inputs during simulation.
Info: soc_system.dipsw_pio: PIO inputs are not hardwired in test bench. Undefined values will be read from PIO inputs during simulation.
Info: soc_system.hps_0: HPS Main PLL counter settings: n = 0  m = 73
Info: soc_system.hps_0: HPS peripherial PLL counter settings: n = 0  m = 39
Warning: soc_system.hps_0: "Configuration/HPS-to-FPGA user 0 clock frequency" (desired_cfg_clk_mhz) requested 100.0 MHz, but only achieved 97.368421 MHz
Warning: soc_system.hps_0: "QSPI clock frequency" (desired_qspi_clk_mhz) requested 400.0 MHz, but only achieved 370.0 MHz
Warning: soc_system.hps_0: 1 or more output clock frequencies cannot be achieved precisely, consider revising desired output clock frequencies.
Info: soc_system.jtag_uart: JTAG UART IP input clock need to be at least double (2x) the operating frequency of JTAG TCK on board
Info: soc_system.sysid_qsys: System ID is not assigned automatically. Edit the System ID parameter to provide a unique ID
Info: soc_system.sysid_qsys: Time stamp will be automatically updated when this component is generated.
Info: soc_system: Generating soc_system "soc_system" for SIM_VERILOG
Info: Interconnect is inserted between master hps_0.h2f_lw_axi_master and slave mm_bridge_0.s0 because the master is of type axi and the slave is of type avalon.
Info: Interconnect is inserted between master hps_only_master.master and slave hps_0.f2h_axi_slave because the master is of type avalon and the slave is of type axi.
Info: Interconnect is inserted between master f2sdram_only_master.master and slave hps_0.f2h_sdram0_data because the master has address signal 32 bit wide, but the slave is 27 bit wide.
Info: Interconnect is inserted between master f2sdram_only_master.master and slave hps_0.f2h_sdram0_data because the master has readdata signal 32 bit wide, but the slave is 256 bit wide.
Info: Interconnect is inserted between master f2sdram_only_master.master and slave hps_0.f2h_sdram0_data because the master has writedata signal 32 bit wide, but the slave is 256 bit wide.
Info: Interconnect is inserted between master f2sdram_only_master.master and slave hps_0.f2h_sdram0_data because the master has byteenable signal 4 bit wide, but the slave is 32 bit wide.
Warning: hps_0.f2h_irq0: Cannot connect clock for irq_mapper_001.sender
Warning: hps_0.f2h_irq0: Cannot connect reset for irq_mapper_001.sender
Warning: hps_0.f2h_irq1: Cannot connect clock for irq_mapper_002.sender
Warning: hps_0.f2h_irq1: Cannot connect reset for irq_mapper_002.sender
Info: ILC: "soc_system" instantiated interrupt_latency_counter "ILC"
Info: button_pio: Starting RTL generation for module 'soc_system_button_pio'
Info: button_pio:   Generation command is [exec C:/programfiles/altera/18.0/quartus/bin64/perl/bin/perl.exe -I C:/programfiles/altera/18.0/quartus/bin64/perl/lib -I C:/programfiles/altera/18.0/quartus/sopc_builder/bin/europa -I C:/programfiles/altera/18.0/quartus/sopc_builder/bin/perl_lib -I C:/programfiles/altera/18.0/quartus/sopc_builder/bin -I C:/programfiles/altera/18.0/quartus/../ip/altera/sopc_builder_ip/common -I C:/programfiles/altera/18.0/quartus/../ip/altera/sopc_builder_ip/altera_avalon_pio -- C:/programfiles/altera/18.0/quartus/../ip/altera/sopc_builder_ip/altera_avalon_pio/generate_rtl.pl --name=soc_system_button_pio --dir=C:/Users/MICHAE~1.ATT/AppData/Local/Temp/alt7941_2207899315548551321.dir/0134_button_pio_gen/ --quartus_dir=C:/programfiles/altera/18.0/quartus --verilog --config=C:/Users/MICHAE~1.ATT/AppData/Local/Temp/alt7941_2207899315548551321.dir/0134_button_pio_gen//soc_system_button_pio_component_configuration.pl  --do_build_sim=1    --sim_dir=C:/Users/MICHAE~1.ATT/AppData/Local/Temp/alt7941_2207899315548551321.dir/0134_button_pio_gen/  ]
Info: button_pio: Done RTL generation for module 'soc_system_button_pio'
Info: button_pio: "soc_system" instantiated altera_avalon_pio "button_pio"
Info: dipsw_pio: Starting RTL generation for module 'soc_system_dipsw_pio'
Info: dipsw_pio:   Generation command is [exec C:/programfiles/altera/18.0/quartus/bin64/perl/bin/perl.exe -I C:/programfiles/altera/18.0/quartus/bin64/perl/lib -I C:/programfiles/altera/18.0/quartus/sopc_builder/bin/europa -I C:/programfiles/altera/18.0/quartus/sopc_builder/bin/perl_lib -I C:/programfiles/altera/18.0/quartus/sopc_builder/bin -I C:/programfiles/altera/18.0/quartus/../ip/altera/sopc_builder_ip/common -I C:/programfiles/altera/18.0/quartus/../ip/altera/sopc_builder_ip/altera_avalon_pio -- C:/programfiles/altera/18.0/quartus/../ip/altera/sopc_builder_ip/altera_avalon_pio/generate_rtl.pl --name=soc_system_dipsw_pio --dir=C:/Users/MICHAE~1.ATT/AppData/Local/Temp/alt7941_2207899315548551321.dir/0135_dipsw_pio_gen/ --quartus_dir=C:/programfiles/altera/18.0/quartus --verilog --config=C:/Users/MICHAE~1.ATT/AppData/Local/Temp/alt7941_2207899315548551321.dir/0135_dipsw_pio_gen//soc_system_dipsw_pio_component_configuration.pl  --do_build_sim=1    --sim_dir=C:/Users/MICHAE~1.ATT/AppData/Local/Temp/alt7941_2207899315548551321.dir/0135_dipsw_pio_gen/  ]
Info: dipsw_pio: Done RTL generation for module 'soc_system_dipsw_pio'
Info: dipsw_pio: "soc_system" instantiated altera_avalon_pio "dipsw_pio"
Info: f2sdram_only_master: "soc_system" instantiated altera_jtag_avalon_master "f2sdram_only_master"
Info: hps_0: "Running  for module: hps_0"
Info: hps_0: HPS Main PLL counter settings: n = 0  m = 73
Info: hps_0: HPS peripherial PLL counter settings: n = 0  m = 39
Warning: hps_0: "Configuration/HPS-to-FPGA user 0 clock frequency" (desired_cfg_clk_mhz) requested 100.0 MHz, but only achieved 97.368421 MHz
Warning: hps_0: "QSPI clock frequency" (desired_qspi_clk_mhz) requested 400.0 MHz, but only achieved 370.0 MHz
Warning: hps_0: 1 or more output clock frequencies cannot be achieved precisely, consider revising desired output clock frequencies.
Info: hps_0: "soc_system" instantiated altera_hps "hps_0"
Info: jtag_uart: Starting RTL generation for module 'soc_system_jtag_uart'
Info: jtag_uart:   Generation command is [exec C:/programfiles/altera/18.0/quartus/bin64/perl/bin/perl.exe -I C:/programfiles/altera/18.0/quartus/bin64/perl/lib -I C:/programfiles/altera/18.0/quartus/sopc_builder/bin/europa -I C:/programfiles/altera/18.0/quartus/sopc_builder/bin/perl_lib -I C:/programfiles/altera/18.0/quartus/sopc_builder/bin -I C:/programfiles/altera/18.0/quartus/../ip/altera/sopc_builder_ip/common -I C:/programfiles/altera/18.0/quartus/../ip/altera/sopc_builder_ip/altera_avalon_jtag_uart -- C:/programfiles/altera/18.0/quartus/../ip/altera/sopc_builder_ip/altera_avalon_jtag_uart/generate_rtl.pl --name=soc_system_jtag_uart --dir=C:/Users/MICHAE~1.ATT/AppData/Local/Temp/alt7941_2207899315548551321.dir/0136_jtag_uart_gen/ --quartus_dir=C:/programfiles/altera/18.0/quartus --verilog --config=C:/Users/MICHAE~1.ATT/AppData/Local/Temp/alt7941_2207899315548551321.dir/0136_jtag_uart_gen//soc_system_jtag_uart_component_configuration.pl  --do_build_sim=1    --sim_dir=C:/Users/MICHAE~1.ATT/AppData/Local/Temp/alt7941_2207899315548551321.dir/0136_jtag_uart_gen/  ]
Info: jtag_uart: Done RTL generation for module 'soc_system_jtag_uart'
Info: jtag_uart: "soc_system" instantiated altera_avalon_jtag_uart "jtag_uart"
Info: led_pio: Starting RTL generation for module 'soc_system_led_pio'
Info: led_pio:   Generation command is [exec C:/programfiles/altera/18.0/quartus/bin64/perl/bin/perl.exe -I C:/programfiles/altera/18.0/quartus/bin64/perl/lib -I C:/programfiles/altera/18.0/quartus/sopc_builder/bin/europa -I C:/programfiles/altera/18.0/quartus/sopc_builder/bin/perl_lib -I C:/programfiles/altera/18.0/quartus/sopc_builder/bin -I C:/programfiles/altera/18.0/quartus/../ip/altera/sopc_builder_ip/common -I C:/programfiles/altera/18.0/quartus/../ip/altera/sopc_builder_ip/altera_avalon_pio -- C:/programfiles/altera/18.0/quartus/../ip/altera/sopc_builder_ip/altera_avalon_pio/generate_rtl.pl --name=soc_system_led_pio --dir=C:/Users/MICHAE~1.ATT/AppData/Local/Temp/alt7941_2207899315548551321.dir/0137_led_pio_gen/ --quartus_dir=C:/programfiles/altera/18.0/quartus --verilog --config=C:/Users/MICHAE~1.ATT/AppData/Local/Temp/alt7941_2207899315548551321.dir/0137_led_pio_gen//soc_system_led_pio_component_configuration.pl  --do_build_sim=1    --sim_dir=C:/Users/MICHAE~1.ATT/AppData/Local/Temp/alt7941_2207899315548551321.dir/0137_led_pio_gen/  ]
Info: led_pio: Done RTL generation for module 'soc_system_led_pio'
Info: led_pio: "soc_system" instantiated altera_avalon_pio "led_pio"
Info: mm_bridge_0: "soc_system" instantiated altera_avalon_mm_bridge "mm_bridge_0"
Info: sysid_qsys: "soc_system" instantiated altera_avalon_sysid_qsys "sysid_qsys"
Info: avalon_st_adapter: Inserting error_adapter: error_adapter_0
Info: mm_interconnect_0: "soc_system" instantiated altera_mm_interconnect "mm_interconnect_0"
Info: avalon_st_adapter: Inserting error_adapter: error_adapter_0
Info: avalon_st_adapter_001: Inserting error_adapter: error_adapter_0
Info: avalon_st_adapter_002: Inserting error_adapter: error_adapter_0
Info: avalon_st_adapter_003: Inserting error_adapter: error_adapter_0
Info: avalon_st_adapter_004: Inserting error_adapter: error_adapter_0
Info: avalon_st_adapter_005: Inserting error_adapter: error_adapter_0
Info: mm_interconnect_1: "soc_system" instantiated altera_mm_interconnect "mm_interconnect_1"
Info: mm_interconnect_2: "soc_system" instantiated altera_mm_interconnect "mm_interconnect_2"
Info: avalon_st_adapter: Inserting error_adapter: error_adapter_0
Info: mm_interconnect_3: "soc_system" instantiated altera_mm_interconnect "mm_interconnect_3"
Info: irq_mapper: "soc_system" instantiated altera_irq_mapper "irq_mapper"
Info: irq_mapper_001: "soc_system" instantiated altera_irq_mapper "irq_mapper_001"
Info: irq_mapper_002: "soc_system" instantiated altera_irq_mapper "irq_mapper_002"
Info: rst_controller: "soc_system" instantiated altera_reset_controller "rst_controller"
Info: jtag_phy_embedded_in_jtag_master: "f2sdram_only_master" instantiated altera_jtag_dc_streaming "jtag_phy_embedded_in_jtag_master"
Info: timing_adt: "f2sdram_only_master" instantiated timing_adapter "timing_adt"
Info: fifo: "f2sdram_only_master" instantiated altera_avalon_sc_fifo "fifo"
Info: b2p: "f2sdram_only_master" instantiated altera_avalon_st_bytes_to_packets "b2p"
Info: p2b: "f2sdram_only_master" instantiated altera_avalon_st_packets_to_bytes "p2b"
Info: transacto: "f2sdram_only_master" instantiated altera_avalon_packets_to_master "transacto"
Info: b2p_adapter: "f2sdram_only_master" instantiated channel_adapter "b2p_adapter"
Info: p2b_adapter: "f2sdram_only_master" instantiated channel_adapter "p2b_adapter"
Error: fpga_interfaces: Error during execution of script generate_hps_sdram.tcl: s0: Error during execution of "{C:/programfiles/altera/18.0/quartus/../nios2eds/Nios II Command Shell.bat} make all 2>> stderr.txt": child process exited abnormally
Error: fpga_interfaces: Error during execution of script generate_hps_sdram.tcl: s0: Execution of command "{C:/programfiles/altera/18.0/quartus/../nios2eds/Nios II Command Shell.bat} make all 2>> stderr.txt" failed
Error: fpga_interfaces: Error during execution of script generate_hps_sdram.tcl: s0: Authorized application C:\ProgramFiles\altera\18.0\quartus\bin64\jtagserver.exe is enabled in the firewall.
Error: fpga_interfaces: Error during execution of script generate_hps_sdram.tcl: s0: ]2;Altera Nios II EDS 18.0 [gcc4]C:/programfiles/altera/18.0/quartus/bin64/uniphy_mcc -ac_code sequencer_mc/ac_rom.s -inst_code sequencer_mc/inst_rom.s -ac_rom ../hps_AC_ROM.hex -inst_rom ../hps_inst_ROM.hex -header sequencer/sequencer_auto.h -vheader ../sequencer_auto_h.sv -ac_rom_init sequencer/sequencer_auto_ac_init.c -inst_rom_init sequencer/sequencer_auto_inst_init.c -DAC_ROM_USER_ADD_0=0_0000_0000_0000 -DAC_ROM_USER_ADD_1=0_0000_0000_1000 -DAC_ROM_MR0=0010001110001 -DAC_ROM_MR0_CALIB= -DAC_ROM_MR0_DLL_RESET=0010101110000 -DAC_ROM_MR1=0000001000100 -DAC_ROM_MR1_OCD_ENABLE= -DAC_ROM_MR2=0000000010000 -DAC_ROM_MR3=0000000000000 -DAC_ROM_MR0_MIRR=0010001101001 -DAC_ROM_MR0_DLL_RESET_MIRR=0010011101000 -DAC_ROM_MR1_MIRR=0000000100100 -DAC_ROM_MR2_MIRR=0000000001000 -DAC_ROM_MR3_MIRR=0000000000000 -DQUARTER_RATE=0 -DHALF_RATE=0 -DFULL_RATE=1 -DNON_DES_CAL=0 -DAP_MODE=0 -DGUARANTEED_READ_BRINGUP_TEST=0 -DMEM_ADDR_WIDTH=13 -DHARD_PHY=1
Error: fpga_interfaces: Error during execution of script generate_hps_sdram.tcl: s0: UniPHY Sequencer Microcode Compiler
Error: fpga_interfaces: Error during execution of script generate_hps_sdram.tcl: s0: Copyright (C) 2018  Intel Corporation. All rights reserved.
Error: fpga_interfaces: Error during execution of script generate_hps_sdram.tcl: s0: Info: Reading sequencer_mc/ac_rom.s ...
Error: fpga_interfaces: Error during execution of script generate_hps_sdram.tcl: s0: Info: Reading sequencer_mc/inst_rom.s ...
Error: fpga_interfaces: Error during execution of script generate_hps_sdram.tcl: s0: Info: Writing ../hps_AC_ROM.hex ...
Error: fpga_interfaces: Error during execution of script generate_hps_sdram.tcl: s0: Info: Writing ../hps_inst_ROM.hex ...
Error: fpga_interfaces: Error during execution of script generate_hps_sdram.tcl: s0: Info: Writing sequencer/sequencer_auto_ac_init.c ...
Error: fpga_interfaces: Error during execution of script generate_hps_sdram.tcl: s0: Info: Writing sequencer/sequencer_auto_inst_init.c ...
Error: fpga_interfaces: Error during execution of script generate_hps_sdram.tcl: s0: Info: Writing sequencer/sequencer_auto.h ...
Error: fpga_interfaces: Error during execution of script generate_hps_sdram.tcl: s0: Info: Writing sequencer/sequencer_auto.h ...
Error: fpga_interfaces: Error during execution of script generate_hps_sdram.tcl: s0: Info: Writing ../sequencer_auto_h.sv ...
Error: fpga_interfaces: Error during execution of script generate_hps_sdram.tcl: s0: Info: Microcode compilation successful
Error: fpga_interfaces: Error during execution of script generate_hps_sdram.tcl: s0: C:/programfiles/altera/18.0/quartus/../nios2eds/sdk2/bin/nios2-bsp hal sequencer_bsp .. --default_sections_mapping sequencer_mem --use_bootloader DONT_CHANGE
Error: fpga_interfaces: Error during execution of script generate_hps_sdram.tcl: s0: child process exited abnormally
Error: fpga_interfaces: Error during execution of script generate_hps_sdram.tcl: s0: add_fileset_file: No such file C:/Users/MICHAE~1.ATT/AppData/Local/Temp/alt7941_8088726893579352128.dir/0006_s0_gen/hps_sequencer_mem.hex
Error: fpga_interfaces: Error during execution of script generate_hps_sdram.tcl: Generation stopped, 10 or more modules remaining
Error: fpga_interfaces: Execution of script generate_hps_sdram.tcl failed
Error: fpga_interfaces: 2019.02.14.14:13:27 Info:
Error: fpga_interfaces: ********************************************************************************************************************
Error: fpga_interfaces: 
Error: fpga_interfaces: Use qsys-generate for a simpler command-line interface for generating IP.
Error: fpga_interfaces: 
Error: fpga_interfaces: Run ip-generate with switch --remove-qsys-generate-warning to prevent this notice from appearing in subsequent runs.
Error: fpga_interfaces: 
Error: fpga_interfaces: ********************************************************************************************************************
Error: fpga_interfaces: 2019.02.14.14:13:31 Warning: Ignored parameter assignment device=5CSXFC6D6F31C6
Error: fpga_interfaces: 2019.02.14.14:13:31 Warning: Ignored parameter assignment extended_family_support=true
Error: fpga_interfaces: 2019.02.14.14:13:36 Warning: hps_sdram: 'Quick' simulation modes are NOT timing accurate. Some simulation memory models may issue warnings or errors
Error: fpga_interfaces: 2019.02.14.14:13:36 Info: hps_sdram.pll_ref_clk: Elaborate: altera_clock_source
Error: fpga_interfaces: 2019.02.14.14:13:36 Info: hps_sdram.pll_ref_clk:            $Revision: #2 $
Error: fpga_interfaces: 2019.02.14.14:13:36 Info: hps_sdram.pll_ref_clk:            $Date: 2018/03/09 $
Error: fpga_interfaces: 2019.02.14.14:13:36 Info: hps_sdram.global_reset: Elaborate: altera_reset_source
Error: fpga_interfaces: 2019.02.14.14:13:36 Info: hps_sdram.global_reset:            $Revision: #2 $
Error: fpga_interfaces: 2019.02.14.14:13:36 Info: hps_sdram.global_reset:            $Date: 2018/03/09 $
Error: fpga_interfaces: 2019.02.14.14:13:36 Info: hps_sdram.global_reset: Reset is negatively asserted.
Error: fpga_interfaces: 2019.02.14.14:13:36 Warning: hps_sdram.p0: p0.oct_sharing must be exported, or connected to a matching conduit.
Error: fpga_interfaces: 2019.02.14.14:13:36 Warning: hps_sdram.p0: p0.io_int must be exported, or connected to a matching conduit.
Error: fpga_interfaces: 2019.02.14.14:13:36 Warning: hps_sdram.sequencer_mem: sequencer_mem.clken1 must be exported, or connected to a matching conduit.
Error: fpga_interfaces: 2019.02.14.14:13:36 Warning: hps_sdram.oct: oct.oct must be exported, or connected to a matching conduit.
Error: fpga_interfaces: 2019.02.14.14:13:36 Warning: hps_sdram.oct: oct.oct_sharing must be exported, or connected to a matching conduit.
Error: fpga_interfaces: 2019.02.14.14:13:36 Info: hps_sdram: Generating altera_mem_if_hps_emif "hps_sdram" for SIM_VERILOG
Error: fpga_interfaces: 2019.02.14.14:13:39 Info: Interconnect is inserted between master s0.mmr_avl and slave c0.csr because the master has burstcount signal 1 bit wide, but the slave is 0 bit wide.
Error: fpga_interfaces: 2019.02.14.14:13:40 Info: pll_ref_clk: "hps_sdram" instantiated altera_avalon_clock_source "pll_ref_clk"
Error: fpga_interfaces: 2019.02.14.14:13:40 Info: global_reset: "hps_sdram" instantiated altera_avalon_reset_source "global_reset"
Error: fpga_interfaces: 2019.02.14.14:13:40 Info: Reusing file C:/Users/MICHAE~1.ATT/AppData/Local/Temp/alt7941_2207899315548551321.dir/0152_fpga_interfaces_gen/submodules/verbosity_pkg.sv
Error: fpga_interfaces: 2019.02.14.14:13:40 Info: pll: "hps_sdram" instantiated altera_mem_if_hps_pll "pll"
Error: fpga_interfaces: 2019.02.14.14:13:40 Info: p0: Generating clock pair generator
Error: fpga_interfaces: 2019.02.14.14:13:41 Info: p0: Generating hps_sdram_p0_altdqdqs
Error: fpga_interfaces: 2019.02.14.14:13:46 Info: p0: "hps_sdram" instantiated altera_mem_if_ddr3_hard_phy_core "p0"
Error: fpga_interfaces: 2019.02.14.14:13:47 Error: s0: Error during execution of "{C:/programfiles/altera/18.0/quartus/../nios2eds/Nios II Command Shell.bat} make all 2>> stderr.txt": child process exited abnormally
Error: fpga_interfaces: 2019.02.14.14:13:47 Error: s0: Execution of command "{C:/programfiles/altera/18.0/quartus/../nios2eds/Nios II Command Shell.bat} make all 2>> stderr.txt" failed
Error: fpga_interfaces: 2019.02.14.14:13:47 Error: s0: Authorized application C:\ProgramFiles\altera\18.0\quartus\bin64\jtagserver.exe is enabled in the firewall.
Error: fpga_interfaces: 2019.02.14.14:13:47 Error: s0: ]2;Altera Nios II EDS 18.0 [gcc4]C:/programfiles/altera/18.0/quartus/bin64/uniphy_mcc -ac_code sequencer_mc/ac_rom.s -inst_code sequencer_mc/inst_rom.s -ac_rom ../hps_AC_ROM.hex -inst_rom ../hps_inst_ROM.hex -header sequencer/sequencer_auto.h -vheader ../sequencer_auto_h.sv -ac_rom_init sequencer/sequencer_auto_ac_init.c -inst_rom_init sequencer/sequencer_auto_inst_init.c -DAC_ROM_USER_ADD_0=0_0000_0000_0000 -DAC_ROM_USER_ADD_1=0_0000_0000_1000 -DAC_ROM_MR0=0010001110001 -DAC_ROM_MR0_CALIB= -DAC_ROM_MR0_DLL_RESET=0010101110000 -DAC_ROM_MR1=0000001000100 -DAC_ROM_MR1_OCD_ENABLE= -DAC_ROM_MR2=0000000010000 -DAC_ROM_MR3=0000000000000 -DAC_ROM_MR0_MIRR=0010001101001 -DAC_ROM_MR0_DLL_RESET_MIRR=0010011101000 -DAC_ROM_MR1_MIRR=0000000100100 -DAC_ROM_MR2_MIRR=0000000001000 -DAC_ROM_MR3_MIRR=0000000000000 -DQUARTER_RATE=0 -DHALF_RATE=0 -DFULL_RATE=1 -DNON_DES_CAL=0 -DAP_MODE=0 -DGUARANTEED_READ_BRINGUP_TEST=0 -DMEM_ADDR_WIDTH=13 -DHARD_PHY=1
Error: fpga_interfaces: 2019.02.14.14:13:47 Error: s0: UniPHY Sequencer Microcode Compiler
Error: fpga_interfaces: 2019.02.14.14:13:47 Error: s0: Copyright (C) 2018  Intel Corporation. All rights reserved.
Error: fpga_interfaces: 2019.02.14.14:13:47 Error: s0: Info: Reading sequencer_mc/ac_rom.s ...
Error: fpga_interfaces: 2019.02.14.14:13:47 Error: s0: Info: Reading sequencer_mc/inst_rom.s ...
Error: fpga_interfaces: 2019.02.14.14:13:47 Error: s0: Info: Writing ../hps_AC_ROM.hex ...
Error: fpga_interfaces: 2019.02.14.14:13:47 Error: s0: Info: Writing ../hps_inst_ROM.hex ...
Error: fpga_interfaces: 2019.02.14.14:13:47 Error: s0: Info: Writing sequencer/sequencer_auto_ac_init.c ...
Error: fpga_interfaces: 2019.02.14.14:13:47 Error: s0: Info: Writing sequencer/sequencer_auto_inst_init.c ...
Error: fpga_interfaces: 2019.02.14.14:13:47 Error: s0: Info: Writing sequencer/sequencer_auto.h ...
Error: fpga_interfaces: 2019.02.14.14:13:47 Error: s0: Info: Writing sequencer/sequencer_auto.h ...
Error: fpga_interfaces: 2019.02.14.14:13:47 Error: s0: Info: Writing ../sequencer_auto_h.sv ...
Error: fpga_interfaces: 2019.02.14.14:13:47 Error: s0: Info: Microcode compilation successful
Error: fpga_interfaces: 2019.02.14.14:13:47 Error: s0: C:/programfiles/altera/18.0/quartus/../nios2eds/sdk2/bin/nios2-bsp hal sequencer_bsp .. --default_sections_mapping sequencer_mem --use_bootloader DONT_CHANGE
Error: fpga_interfaces: 2019.02.14.14:13:47 Error: s0: child process exited abnormally
Error: fpga_interfaces: 2019.02.14.14:13:47 Error: s0: add_fileset_file: No such file C:/Users/MICHAE~1.ATT/AppData/Local/Temp/alt7941_8088726893579352128.dir/0006_s0_gen/hps_sequencer_mem.hex
Error: fpga_interfaces: while executing
Error: fpga_interfaces: "add_fileset_file $file_name [::alt_mem_if::util::hwtcl_utils::get_file_type $file_name 0] PATH $file_pathname"
Error: fpga_interfaces: ("foreach" body line 4)
Error: fpga_interfaces: invoked from within
Error: fpga_interfaces: "foreach file_pathname $return_files_sw {
Error: fpga_interfaces: 		_dprint 1 "Preparing to add $file_pathname"
Error: fpga_interfaces: 		set file_name [file tail $file_pathname]
Error: fpga_interfaces: 		add_fileset_file $..."
Error: fpga_interfaces: (procedure "generate_sw" line 18)
Error: fpga_interfaces: invoked from within
Error: fpga_interfaces: "generate_sw $name $fileset"
Error: fpga_interfaces: (procedure "generate_files" line 37)
Error: fpga_interfaces: invoked from within
Error: fpga_interfaces: "generate_files $name SIM_VERILOG"
Error: fpga_interfaces: (procedure "generate_verilog_sim" line 3)
Error: fpga_interfaces: invoked from within
Error: fpga_interfaces: "generate_verilog_sim altera_mem_if_hhp_qseq_top"
Error: fpga_interfaces: 2019.02.14.14:13:47 Info: s0: "hps_sdram" instantiated altera_mem_if_hhp_ddr3_qseq "s0"
Error: fpga_interfaces: 2019.02.14.14:13:47 Error: Generation stopped, 10 or more modules remaining
Error: fpga_interfaces: 2019.02.14.14:13:47 Info: hps_sdram: Done "hps_sdram" with 16 modules, 61 files
Info: fpga_interfaces: "hps_0" instantiated altera_interface_generator "fpga_interfaces"
Error: Generation stopped, 102 or more modules remaining
Info: soc_system: Done "soc_system" with 62 modules, 114 files
Error: qsys-generate failed with exit code 1: 93 Errors, 10 Warnings
Info: Finished: Create simulation model
Info: Starting: Create Modelsim Project.
Info: sim-script-gen --spd="C:\Network mirror\Firmware\FW069\Source Files\DE10_Standard_GHRD\soc_system\soc_system.spd" --output-directory="C:/Network mirror/Firmware/FW069/Source Files/DE10_Standard_GHRD/soc_system/simulation/" --use-relative-paths=true
Info: Doing: ip-make-simscript --spd=C:\Network mirror\Firmware\FW069\Source Files\DE10_Standard_GHRD\soc_system\soc_system.spd --output-directory=C:/Network mirror/Firmware/FW069/Source Files/DE10_Standard_GHRD/soc_system/simulation/ --use-relative-paths=true
Info: Generating the following file(s) for MODELSIM simulator in C:/Network mirror/Firmware/FW069/Source Files/DE10_Standard_GHRD/soc_system/simulation/ directory:
Info: 	mentor/msim_setup.tcl
Info: Generating the following file(s) for VCS simulator in C:/Network mirror/Firmware/FW069/Source Files/DE10_Standard_GHRD/soc_system/simulation/ directory:
Info: 	synopsys/vcs/vcs_setup.sh
Info: Generating the following file(s) for VCSMX simulator in C:/Network mirror/Firmware/FW069/Source Files/DE10_Standard_GHRD/soc_system/simulation/ directory:
Info: 	synopsys/vcsmx/synopsys_sim.setup
Info: 	synopsys/vcsmx/vcsmx_setup.sh
Info: Generating the following file(s) for NCSIM simulator in C:/Network mirror/Firmware/FW069/Source Files/DE10_Standard_GHRD/soc_system/simulation/ directory:
Info: 	cadence/cds.lib
Info: 	cadence/hdl.var
Info: 	cadence/ncsim_setup.sh
Info: 	27 .cds.lib files in cadence/cds_libs/ directory
Info: Generating the following file(s) for RIVIERA simulator in C:/Network mirror/Firmware/FW069/Source Files/DE10_Standard_GHRD/soc_system/simulation/ directory:
Info: 	aldec/rivierapro_setup.tcl
Info: For information on how to simulate your IP, see the explanatory comments in the simulator-specific subdirectories under C:/Network mirror/Firmware/FW069/Source Files/DE10_Standard_GHRD/soc_system/simulation/.
Info: Regenerate these scripts whenever you make any change to any Quartus-generated IP in your project.
Info: Finished: Create Modelsim Project.
Info: Starting: Create block symbol file (.bsf)
Info: qsys-generate "C:\Network mirror\Firmware\FW069\Source Files\DE10_Standard_GHRD\soc_system.qsys" --block-symbol-file --output-directory="C:\Network mirror\Firmware\FW069\Source Files\DE10_Standard_GHRD\soc_system" --family="Cyclone V" --part=5CSXFC6D6F31C6
Progress: Loading DE10_Standard_GHRD/soc_system.qsys
Progress: Reading input file
Progress: Adding ILC [interrupt_latency_counter 18.0]
Progress: Parameterizing module ILC
Progress: Adding button_pio [altera_avalon_pio 18.0]
Progress: Parameterizing module button_pio
Progress: Adding clk_0 [clock_source 18.0]
Progress: Parameterizing module clk_0
Progress: Adding dipsw_pio [altera_avalon_pio 18.0]
Progress: Parameterizing module dipsw_pio
Progress: Adding f2sdram_only_master [altera_jtag_avalon_master 18.0]
Progress: Parameterizing module f2sdram_only_master
Progress: Adding fpga_only_master [altera_jtag_avalon_master 18.0]
Progress: Parameterizing module fpga_only_master
Progress: Adding hps_0 [altera_hps 18.0]
Progress: Parameterizing module hps_0
Progress: Adding hps_only_master [altera_jtag_avalon_master 18.0]
Progress: Parameterizing module hps_only_master
Progress: Adding jtag_uart [altera_avalon_jtag_uart 18.0]
Progress: Parameterizing module jtag_uart
Progress: Adding led_pio [altera_avalon_pio 18.0]
Progress: Parameterizing module led_pio
Progress: Adding mm_bridge_0 [altera_avalon_mm_bridge 18.0]
Progress: Parameterizing module mm_bridge_0
Progress: Adding sysid_qsys [altera_avalon_sysid_qsys 18.0]
Progress: Parameterizing module sysid_qsys
Progress: Building connections
Progress: Parameterizing connections
Progress: Validating
Progress: Done reading input file
Info: soc_system.button_pio: PIO inputs are not hardwired in test bench. Undefined values will be read from PIO inputs during simulation.
Info: soc_system.dipsw_pio: PIO inputs are not hardwired in test bench. Undefined values will be read from PIO inputs during simulation.
Info: soc_system.hps_0: HPS Main PLL counter settings: n = 0  m = 73
Info: soc_system.hps_0: HPS peripherial PLL counter settings: n = 0  m = 39
Warning: soc_system.hps_0: "Configuration/HPS-to-FPGA user 0 clock frequency" (desired_cfg_clk_mhz) requested 100.0 MHz, but only achieved 97.368421 MHz
Warning: soc_system.hps_0: "QSPI clock frequency" (desired_qspi_clk_mhz) requested 400.0 MHz, but only achieved 370.0 MHz
Warning: soc_system.hps_0: 1 or more output clock frequencies cannot be achieved precisely, consider revising desired output clock frequencies.
Info: soc_system.jtag_uart: JTAG UART IP input clock need to be at least double (2x) the operating frequency of JTAG TCK on board
Info: soc_system.sysid_qsys: System ID is not assigned automatically. Edit the System ID parameter to provide a unique ID
Info: soc_system.sysid_qsys: Time stamp will be automatically updated when this component is generated.
Info: qsys-generate succeeded.
Info: Finished: Create block symbol file (.bsf)
Info: 
Info: Starting: Create HDL design files for synthesis
Info: qsys-generate "C:\Network mirror\Firmware\FW069\Source Files\DE10_Standard_GHRD\soc_system.qsys" --synthesis=VERILOG --output-directory="C:\Network mirror\Firmware\FW069\Source Files\DE10_Standard_GHRD\soc_system\synthesis" --family="Cyclone V" --part=5CSXFC6D6F31C6
Progress: Loading DE10_Standard_GHRD/soc_system.qsys
Progress: Reading input file
Progress: Adding ILC [interrupt_latency_counter 18.0]
Progress: Parameterizing module ILC
Progress: Adding button_pio [altera_avalon_pio 18.0]
Progress: Parameterizing module button_pio
Progress: Adding clk_0 [clock_source 18.0]
Progress: Parameterizing module clk_0
Progress: Adding dipsw_pio [altera_avalon_pio 18.0]
Progress: Parameterizing module dipsw_pio
Progress: Adding f2sdram_only_master [altera_jtag_avalon_master 18.0]
Progress: Parameterizing module f2sdram_only_master
Progress: Adding fpga_only_master [altera_jtag_avalon_master 18.0]
Progress: Parameterizing module fpga_only_master
Progress: Adding hps_0 [altera_hps 18.0]
Progress: Parameterizing module hps_0
Progress: Adding hps_only_master [altera_jtag_avalon_master 18.0]
Progress: Parameterizing module hps_only_master
Progress: Adding jtag_uart [altera_avalon_jtag_uart 18.0]
Progress: Parameterizing module jtag_uart
Progress: Adding led_pio [altera_avalon_pio 18.0]
Progress: Parameterizing module led_pio
Progress: Adding mm_bridge_0 [altera_avalon_mm_bridge 18.0]
Progress: Parameterizing module mm_bridge_0
Progress: Adding sysid_qsys [altera_avalon_sysid_qsys 18.0]
Progress: Parameterizing module sysid_qsys
Progress: Building connections
Progress: Parameterizing connections
Progress: Validating
Progress: Done reading input file
Info: soc_system.button_pio: PIO inputs are not hardwired in test bench. Undefined values will be read from PIO inputs during simulation.
Info: soc_system.dipsw_pio: PIO inputs are not hardwired in test bench. Undefined values will be read from PIO inputs during simulation.
Info: soc_system.hps_0: HPS Main PLL counter settings: n = 0  m = 73
Info: soc_system.hps_0: HPS peripherial PLL counter settings: n = 0  m = 39
Warning: soc_system.hps_0: "Configuration/HPS-to-FPGA user 0 clock frequency" (desired_cfg_clk_mhz) requested 100.0 MHz, but only achieved 97.368421 MHz
Warning: soc_system.hps_0: "QSPI clock frequency" (desired_qspi_clk_mhz) requested 400.0 MHz, but only achieved 370.0 MHz
Warning: soc_system.hps_0: 1 or more output clock frequencies cannot be achieved precisely, consider revising desired output clock frequencies.
Info: soc_system.jtag_uart: JTAG UART IP input clock need to be at least double (2x) the operating frequency of JTAG TCK on board
Info: soc_system.sysid_qsys: System ID is not assigned automatically. Edit the System ID parameter to provide a unique ID
Info: soc_system.sysid_qsys: Time stamp will be automatically updated when this component is generated.
Info: soc_system: Generating soc_system "soc_system" for QUARTUS_SYNTH
Info: Interconnect is inserted between master hps_0.h2f_lw_axi_master and slave mm_bridge_0.s0 because the master is of type axi and the slave is of type avalon.
Info: Interconnect is inserted between master hps_only_master.master and slave hps_0.f2h_axi_slave because the master is of type avalon and the slave is of type axi.
Info: Interconnect is inserted between master f2sdram_only_master.master and slave hps_0.f2h_sdram0_data because the master has address signal 32 bit wide, but the slave is 27 bit wide.
Info: Interconnect is inserted between master f2sdram_only_master.master and slave hps_0.f2h_sdram0_data because the master has readdata signal 32 bit wide, but the slave is 256 bit wide.
Info: Interconnect is inserted between master f2sdram_only_master.master and slave hps_0.f2h_sdram0_data because the master has writedata signal 32 bit wide, but the slave is 256 bit wide.
Info: Interconnect is inserted between master f2sdram_only_master.master and slave hps_0.f2h_sdram0_data because the master has byteenable signal 4 bit wide, but the slave is 32 bit wide.
Warning: hps_0.f2h_irq0: Cannot connect clock for irq_mapper_001.sender
Warning: hps_0.f2h_irq0: Cannot connect reset for irq_mapper_001.sender
Warning: hps_0.f2h_irq1: Cannot connect clock for irq_mapper_002.sender
Warning: hps_0.f2h_irq1: Cannot connect reset for irq_mapper_002.sender
Info: ILC: "soc_system" instantiated interrupt_latency_counter "ILC"
Info: button_pio: Starting RTL generation for module 'soc_system_button_pio'
Info: button_pio:   Generation command is [exec C:/programfiles/altera/18.0/quartus/bin64/perl/bin/perl.exe -I C:/programfiles/altera/18.0/quartus/bin64/perl/lib -I C:/programfiles/altera/18.0/quartus/sopc_builder/bin/europa -I C:/programfiles/altera/18.0/quartus/sopc_builder/bin/perl_lib -I C:/programfiles/altera/18.0/quartus/sopc_builder/bin -I C:/programfiles/altera/18.0/quartus/../ip/altera/sopc_builder_ip/common -I C:/programfiles/altera/18.0/quartus/../ip/altera/sopc_builder_ip/altera_avalon_pio -- C:/programfiles/altera/18.0/quartus/../ip/altera/sopc_builder_ip/altera_avalon_pio/generate_rtl.pl --name=soc_system_button_pio --dir=C:/Users/MICHAE~1.ATT/AppData/Local/Temp/alt7941_2207899315548551321.dir/0155_button_pio_gen/ --quartus_dir=C:/programfiles/altera/18.0/quartus --verilog --config=C:/Users/MICHAE~1.ATT/AppData/Local/Temp/alt7941_2207899315548551321.dir/0155_button_pio_gen//soc_system_button_pio_component_configuration.pl  --do_build_sim=0  ]
Info: button_pio: Done RTL generation for module 'soc_system_button_pio'
Info: button_pio: "soc_system" instantiated altera_avalon_pio "button_pio"
Info: dipsw_pio: Starting RTL generation for module 'soc_system_dipsw_pio'
Info: dipsw_pio:   Generation command is [exec C:/programfiles/altera/18.0/quartus/bin64/perl/bin/perl.exe -I C:/programfiles/altera/18.0/quartus/bin64/perl/lib -I C:/programfiles/altera/18.0/quartus/sopc_builder/bin/europa -I C:/programfiles/altera/18.0/quartus/sopc_builder/bin/perl_lib -I C:/programfiles/altera/18.0/quartus/sopc_builder/bin -I C:/programfiles/altera/18.0/quartus/../ip/altera/sopc_builder_ip/common -I C:/programfiles/altera/18.0/quartus/../ip/altera/sopc_builder_ip/altera_avalon_pio -- C:/programfiles/altera/18.0/quartus/../ip/altera/sopc_builder_ip/altera_avalon_pio/generate_rtl.pl --name=soc_system_dipsw_pio --dir=C:/Users/MICHAE~1.ATT/AppData/Local/Temp/alt7941_2207899315548551321.dir/0156_dipsw_pio_gen/ --quartus_dir=C:/programfiles/altera/18.0/quartus --verilog --config=C:/Users/MICHAE~1.ATT/AppData/Local/Temp/alt7941_2207899315548551321.dir/0156_dipsw_pio_gen//soc_system_dipsw_pio_component_configuration.pl  --do_build_sim=0  ]
Info: dipsw_pio: Done RTL generation for module 'soc_system_dipsw_pio'
Info: dipsw_pio: "soc_system" instantiated altera_avalon_pio "dipsw_pio"
Info: f2sdram_only_master: "soc_system" instantiated altera_jtag_avalon_master "f2sdram_only_master"
Info: hps_0: "Running  for module: hps_0"
Info: hps_0: HPS Main PLL counter settings: n = 0  m = 73
Info: hps_0: HPS peripherial PLL counter settings: n = 0  m = 39
Warning: hps_0: "Configuration/HPS-to-FPGA user 0 clock frequency" (desired_cfg_clk_mhz) requested 100.0 MHz, but only achieved 97.368421 MHz
Warning: hps_0: "QSPI clock frequency" (desired_qspi_clk_mhz) requested 400.0 MHz, but only achieved 370.0 MHz
Warning: hps_0: 1 or more output clock frequencies cannot be achieved precisely, consider revising desired output clock frequencies.
Info: hps_0: "soc_system" instantiated altera_hps "hps_0"
Info: jtag_uart: Starting RTL generation for module 'soc_system_jtag_uart'
Info: jtag_uart:   Generation command is [exec C:/programfiles/altera/18.0/quartus/bin64/perl/bin/perl.exe -I C:/programfiles/altera/18.0/quartus/bin64/perl/lib -I C:/programfiles/altera/18.0/quartus/sopc_builder/bin/europa -I C:/programfiles/altera/18.0/quartus/sopc_builder/bin/perl_lib -I C:/programfiles/altera/18.0/quartus/sopc_builder/bin -I C:/programfiles/altera/18.0/quartus/../ip/altera/sopc_builder_ip/common -I C:/programfiles/altera/18.0/quartus/../ip/altera/sopc_builder_ip/altera_avalon_jtag_uart -- C:/programfiles/altera/18.0/quartus/../ip/altera/sopc_builder_ip/altera_avalon_jtag_uart/generate_rtl.pl --name=soc_system_jtag_uart --dir=C:/Users/MICHAE~1.ATT/AppData/Local/Temp/alt7941_2207899315548551321.dir/0157_jtag_uart_gen/ --quartus_dir=C:/programfiles/altera/18.0/quartus --verilog --config=C:/Users/MICHAE~1.ATT/AppData/Local/Temp/alt7941_2207899315548551321.dir/0157_jtag_uart_gen//soc_system_jtag_uart_component_configuration.pl  --do_build_sim=0  ]
Info: jtag_uart: Done RTL generation for module 'soc_system_jtag_uart'
Info: jtag_uart: "soc_system" instantiated altera_avalon_jtag_uart "jtag_uart"
Info: led_pio: Starting RTL generation for module 'soc_system_led_pio'
Info: led_pio:   Generation command is [exec C:/programfiles/altera/18.0/quartus/bin64/perl/bin/perl.exe -I C:/programfiles/altera/18.0/quartus/bin64/perl/lib -I C:/programfiles/altera/18.0/quartus/sopc_builder/bin/europa -I C:/programfiles/altera/18.0/quartus/sopc_builder/bin/perl_lib -I C:/programfiles/altera/18.0/quartus/sopc_builder/bin -I C:/programfiles/altera/18.0/quartus/../ip/altera/sopc_builder_ip/common -I C:/programfiles/altera/18.0/quartus/../ip/altera/sopc_builder_ip/altera_avalon_pio -- C:/programfiles/altera/18.0/quartus/../ip/altera/sopc_builder_ip/altera_avalon_pio/generate_rtl.pl --name=soc_system_led_pio --dir=C:/Users/MICHAE~1.ATT/AppData/Local/Temp/alt7941_2207899315548551321.dir/0158_led_pio_gen/ --quartus_dir=C:/programfiles/altera/18.0/quartus --verilog --config=C:/Users/MICHAE~1.ATT/AppData/Local/Temp/alt7941_2207899315548551321.dir/0158_led_pio_gen//soc_system_led_pio_component_configuration.pl  --do_build_sim=0  ]
Info: led_pio: Done RTL generation for module 'soc_system_led_pio'
Info: led_pio: "soc_system" instantiated altera_avalon_pio "led_pio"
Info: mm_bridge_0: "soc_system" instantiated altera_avalon_mm_bridge "mm_bridge_0"
Info: sysid_qsys: "soc_system" instantiated altera_avalon_sysid_qsys "sysid_qsys"
Info: avalon_st_adapter: Inserting error_adapter: error_adapter_0
Info: mm_interconnect_0: "soc_system" instantiated altera_mm_interconnect "mm_interconnect_0"
Info: avalon_st_adapter: Inserting error_adapter: error_adapter_0
Info: avalon_st_adapter_001: Inserting error_adapter: error_adapter_0
Info: avalon_st_adapter_002: Inserting error_adapter: error_adapter_0
Info: avalon_st_adapter_003: Inserting error_adapter: error_adapter_0
Info: avalon_st_adapter_004: Inserting error_adapter: error_adapter_0
Info: avalon_st_adapter_005: Inserting error_adapter: error_adapter_0
Info: mm_interconnect_1: "soc_system" instantiated altera_mm_interconnect "mm_interconnect_1"
Info: mm_interconnect_2: "soc_system" instantiated altera_mm_interconnect "mm_interconnect_2"
Info: avalon_st_adapter: Inserting error_adapter: error_adapter_0
Info: mm_interconnect_3: "soc_system" instantiated altera_mm_interconnect "mm_interconnect_3"
Info: irq_mapper: "soc_system" instantiated altera_irq_mapper "irq_mapper"
Info: irq_mapper_001: "soc_system" instantiated altera_irq_mapper "irq_mapper_001"
Info: irq_mapper_002: "soc_system" instantiated altera_irq_mapper "irq_mapper_002"
Info: rst_controller: "soc_system" instantiated altera_reset_controller "rst_controller"
Info: jtag_phy_embedded_in_jtag_master: "f2sdram_only_master" instantiated altera_jtag_dc_streaming "jtag_phy_embedded_in_jtag_master"
Info: timing_adt: "f2sdram_only_master" instantiated timing_adapter "timing_adt"
Info: fifo: "f2sdram_only_master" instantiated altera_avalon_sc_fifo "fifo"
Info: b2p: "f2sdram_only_master" instantiated altera_avalon_st_bytes_to_packets "b2p"
Info: p2b: "f2sdram_only_master" instantiated altera_avalon_st_packets_to_bytes "p2b"
Info: transacto: "f2sdram_only_master" instantiated altera_avalon_packets_to_master "transacto"
Info: b2p_adapter: "f2sdram_only_master" instantiated channel_adapter "b2p_adapter"
Info: p2b_adapter: "f2sdram_only_master" instantiated channel_adapter "p2b_adapter"
Info: fpga_interfaces: "hps_0" instantiated altera_interface_generator "fpga_interfaces"
Info: hps_io: "hps_0" instantiated altera_hps_io "hps_io"
Info: mm_bridge_0_s0_translator: "mm_interconnect_0" instantiated altera_merlin_slave_translator "mm_bridge_0_s0_translator"
Info: hps_0_h2f_lw_axi_master_agent: "mm_interconnect_0" instantiated altera_merlin_axi_master_ni "hps_0_h2f_lw_axi_master_agent"
Info: mm_bridge_0_s0_agent: "mm_interconnect_0" instantiated altera_merlin_slave_agent "mm_bridge_0_s0_agent"
Info: router: "mm_interconnect_0" instantiated altera_merlin_router "router"
Info: router_002: "mm_interconnect_0" instantiated altera_merlin_router "router_002"
Info: mm_bridge_0_s0_burst_adapter: "mm_interconnect_0" instantiated altera_merlin_burst_adapter "mm_bridge_0_s0_burst_adapter"
Info: Reusing file C:/Network mirror/Firmware/FW069/Source Files/DE10_Standard_GHRD/soc_system/synthesis/submodules/altera_merlin_address_alignment.sv
Info: Reusing file C:/Network mirror/Firmware/FW069/Source Files/DE10_Standard_GHRD/soc_system/synthesis/submodules/altera_avalon_st_pipeline_stage.sv
Info: Reusing file C:/Network mirror/Firmware/FW069/Source Files/DE10_Standard_GHRD/soc_system/synthesis/submodules/altera_avalon_st_pipeline_base.v
Info: cmd_demux: "mm_interconnect_0" instantiated altera_merlin_demultiplexer "cmd_demux"
Info: cmd_mux: "mm_interconnect_0" instantiated altera_merlin_multiplexer "cmd_mux"
Info: rsp_demux: "mm_interconnect_0" instantiated altera_merlin_demultiplexer "rsp_demux"
Info: rsp_mux: "mm_interconnect_0" instantiated altera_merlin_multiplexer "rsp_mux"
Info: Reusing file C:/Network mirror/Firmware/FW069/Source Files/DE10_Standard_GHRD/soc_system/synthesis/submodules/altera_merlin_arbitrator.sv
Info: avalon_st_adapter: "mm_interconnect_0" instantiated altera_avalon_st_adapter "avalon_st_adapter"
Info: mm_bridge_0_m0_translator: "mm_interconnect_1" instantiated altera_merlin_master_translator "mm_bridge_0_m0_translator"
Info: mm_bridge_0_m0_agent: "mm_interconnect_1" instantiated altera_merlin_master_agent "mm_bridge_0_m0_agent"
Info: router: "mm_interconnect_1" instantiated altera_merlin_router "router"
Info: router_002: "mm_interconnect_1" instantiated altera_merlin_router "router_002"
Info: mm_bridge_0_m0_limiter: "mm_interconnect_1" instantiated altera_merlin_traffic_limiter "mm_bridge_0_m0_limiter"
Info: Reusing file C:/Network mirror/Firmware/FW069/Source Files/DE10_Standard_GHRD/soc_system/synthesis/submodules/altera_avalon_sc_fifo.v
Info: Reusing file C:/Network mirror/Firmware/FW069/Source Files/DE10_Standard_GHRD/soc_system/synthesis/submodules/altera_avalon_st_pipeline_base.v
Info: cmd_demux: "mm_interconnect_1" instantiated altera_merlin_demultiplexer "cmd_demux"
Info: cmd_mux: "mm_interconnect_1" instantiated altera_merlin_multiplexer "cmd_mux"
Info: Reusing file C:/Network mirror/Firmware/FW069/Source Files/DE10_Standard_GHRD/soc_system/synthesis/submodules/altera_merlin_arbitrator.sv
Info: rsp_demux: "mm_interconnect_1" instantiated altera_merlin_demultiplexer "rsp_demux"
Info: rsp_mux: "mm_interconnect_1" instantiated altera_merlin_multiplexer "rsp_mux"
Info: Reusing file C:/Network mirror/Firmware/FW069/Source Files/DE10_Standard_GHRD/soc_system/synthesis/submodules/altera_merlin_arbitrator.sv
Info: hps_0_f2h_axi_slave_agent: "mm_interconnect_2" instantiated altera_merlin_axi_slave_ni "hps_0_f2h_axi_slave_agent"
Info: Reusing file C:/Network mirror/Firmware/FW069/Source Files/DE10_Standard_GHRD/soc_system/synthesis/submodules/altera_merlin_burst_uncompressor.sv
Info: Reusing file C:/Network mirror/Firmware/FW069/Source Files/DE10_Standard_GHRD/soc_system/synthesis/submodules/altera_avalon_sc_fifo.v
Info: Reusing file C:/Network mirror/Firmware/FW069/Source Files/DE10_Standard_GHRD/soc_system/synthesis/submodules/altera_merlin_address_alignment.sv
Info: router: "mm_interconnect_2" instantiated altera_merlin_router "router"
Info: router_001: "mm_interconnect_2" instantiated altera_merlin_router "router_001"
Info: cmd_demux: "mm_interconnect_2" instantiated altera_merlin_demultiplexer "cmd_demux"
Info: cmd_mux: "mm_interconnect_2" instantiated altera_merlin_multiplexer "cmd_mux"
Info: Reusing file C:/Network mirror/Firmware/FW069/Source Files/DE10_Standard_GHRD/soc_system/synthesis/submodules/altera_merlin_arbitrator.sv
Info: rsp_demux: "mm_interconnect_2" instantiated altera_merlin_demultiplexer "rsp_demux"
Info: rsp_mux: "mm_interconnect_2" instantiated altera_merlin_multiplexer "rsp_mux"
Info: Reusing file C:/Network mirror/Firmware/FW069/Source Files/DE10_Standard_GHRD/soc_system/synthesis/submodules/altera_merlin_arbitrator.sv
Info: hps_0_f2h_axi_slave_wr_cmd_width_adapter: "mm_interconnect_2" instantiated altera_merlin_width_adapter "hps_0_f2h_axi_slave_wr_cmd_width_adapter"
Info: Reusing file C:/Network mirror/Firmware/FW069/Source Files/DE10_Standard_GHRD/soc_system/synthesis/submodules/altera_merlin_address_alignment.sv
Info: Reusing file C:/Network mirror/Firmware/FW069/Source Files/DE10_Standard_GHRD/soc_system/synthesis/submodules/altera_merlin_burst_uncompressor.sv
Info: router: "mm_interconnect_3" instantiated altera_merlin_router "router"
Info: router_001: "mm_interconnect_3" instantiated altera_merlin_router "router_001"
Info: cmd_demux: "mm_interconnect_3" instantiated altera_merlin_demultiplexer "cmd_demux"
Info: cmd_mux: "mm_interconnect_3" instantiated altera_merlin_multiplexer "cmd_mux"
Info: Reusing file C:/Network mirror/Firmware/FW069/Source Files/DE10_Standard_GHRD/soc_system/synthesis/submodules/altera_merlin_arbitrator.sv
Info: rsp_mux: "mm_interconnect_3" instantiated altera_merlin_multiplexer "rsp_mux"
Info: Reusing file C:/Network mirror/Firmware/FW069/Source Files/DE10_Standard_GHRD/soc_system/synthesis/submodules/altera_merlin_arbitrator.sv
Info: avalon_st_adapter: "mm_interconnect_3" instantiated altera_avalon_st_adapter "avalon_st_adapter"
Info: border: "hps_io" instantiated altera_interface_generator "border"
Info: error_adapter_0: "avalon_st_adapter" instantiated error_adapter "error_adapter_0"
Info: error_adapter_0: "avalon_st_adapter" instantiated error_adapter "error_adapter_0"
Info: soc_system: Done "soc_system" with 65 modules, 133 files
Info: qsys-generate succeeded.
Info: Finished: Create HDL design files for synthesis