topic Re:Let me know how to set up Publisher and Subscriber to exchange messages between containers. in Edge Software Catalog

Let me know how to set up Publisher and Subscriber to exchange messages between containers.

Louis8 — Wed, 08 Nov 2023 07:57:53 GMT

I used Intel Edge Insight for Industrial to create a third party container and create a publisher as shown below. Also, I referred to the guide document and defined publisher and subscriber correctly in config.json. Of course, the Topic name was also defined accurately.
As shown in the picture, I want to receive Publisher's message sent from the Thirty-Party container as a Subscriber in the Video Visualization container.

However, the message is not being received from the Visualization container. Topic information is not being received at all. I would like to know how to solve it.

Do I need additional settings for the newly created publisher?

Re:Let me know how to set up Publisher and Subscriber to exchange messages between containers.

JesusE_Intel — Fri, 10 Nov 2023 00:32:21 GMT

Hi Louis8,

Thanks for reaching out, have you looked into the Message bus examples from the documentation?

https://eiidocs.intel.com/4.1/pages/developer-reference.html#example-usage

Also, I provided some steps/details in another discussion. Could you please give that a try and let me know if that helps?

https://community.intel.com/t5/Intel-Edge-Software-Hub/question-about-eii-message-bus/m-p/1405079#M1354

Regards,

Jesus

Re: Let me know how to set up Publisher and Subscriber to exchange messages between containers.

Louis8 — Fri, 10 Nov 2023 01:26:26 GMT

Thank you. Let me check.

Re: Let me know how to set up Publisher and Subscriber to exchange messages between containers.

Louis8 — Mon, 13 Nov 2023 22:46:48 GMT

Oh yeah. I found the answer to my inquiry very nicely in the place you mentioned.

Thank you. Jesus

Re: Let me know how to set up Publisher and Subscriber to exchange messages between containers.

JesusE_Intel — Tue, 14 Nov 2023 17:02:15 GMT

Great, glad it worked for you! If you need any additional information, please submit a new question as this thread will no longer be monitored.