topic Host OS - Windows 7, 64 in Analyzers

Call Count column does not appear

L_K_ — Fri, 15 Aug 2014 18:45:01 GMT

Hi. I'm running Advanced Hotspots analysis with Hot Spots, call counts, stacks and context switches checked However, when I look at the results, I don't see Call Count column. I have Show All columns checked and scrolling to the right or left does not reveal a column. Any idea? Thanks.

If you already did "Show All

Peter_W_Intel — Sat, 16 Aug 2014 05:00:42 GMT

If you already did "Show All Columns", it might be due to vtss plus driver was not enabled.

Do you work on Linux*? I remember that the feature needs Linux kernel version 2.6.32 or above.

Check - "lsmod | grep vtsspp" if that driver was loaded.

Another thing is - are your sure if your hot function calls were low number, this might cause "call count" column invisible. You may build a simple example which calls hot functions frequently from a loop, then verify.

This is VMware 10, Windows 7

L_K_ — Sun, 17 Aug 2014 04:15:43 GMT

This is VMware 10, Windows 7 environment. Thanks.

Try to run from elevated cmd

Bernard — Sun, 17 Aug 2014 17:04:32 GMT

Try to run from elevated cmd driverquery -v and look for vtss.sys driver entry. Pay attention to started and running info.

@ L K

Peter_W_Intel — Mon, 18 Aug 2014 03:31:59 GMT

@ L K

Thanks for info. However I wonder that only operation system on VMWare Fusion* 5 is supported to run hardware event-based sampling - as I know you ran advanced-hotspots, but I saw your all CPI values are zero!!! Can you verify this issue in native operation system?

Thanks, Peter

@L K What is your host OS?

Bernard — Mon, 18 Aug 2014 05:10:11 GMT

@L K

What is your host OS?

Host OS - Windows 7, 64

L_K_ — Mon, 18 Aug 2014 20:04:53 GMT

Host OS - Windows 7, 64 bit

Guest, VMWare 10, Windows 7, 32 bit

vtss is running

Thank you.

Did you try to check

Bernard — Tue, 19 Aug 2014 05:18:54 GMT

Did you try to check functions call count while profiling your code on the Host machine?

In order to prove if this is

Peter_W_Intel — Tue, 19 Aug 2014 08:39:00 GMT

In order to verify if this is problematical result (I saw that CPI is zero in columns.png), you can use command line to display interest of data from the report by using:

amplxe-cl -report hotspots; // which should display "call count" column, if you enabled it during data collecting.

amplxe-cl -report summary; // verify CPI value in this report, it it zero? It doesn't make sense.

@Peter

Bernard — Wed, 20 Aug 2014 05:30:10 GMT

@Peter

Is there a possibility to receive or redirect VTune output to comsole window only without loading UI? I was thinking about the possibility of failure related to some column CPI UI handler.

>>>Is there a possibility to

Bernard — Wed, 20 Aug 2014 06:08:54 GMT

>>>Is there a possibility to receive or redirect VTune output to comsole window only without loading UI>>>

Of course as a diagnostic option.

I ran command option followed

L_K_ — Wed, 20 Aug 2014 07:31:39 GMT

I ran command option followed by > summary.txt and got the output ( or most of it? ) to the file. See attached. Does VTune support advanced hotspots on VMware Workstation ( Win 7 guest & Host )? It would take me a bit to set it up on non-VM environment to see if I get correct results ( even if I do - my expectation was that I could run this on VM as I used to with an old version of VTune - I'm aware of changes ). I can try running sample and analyzing it on the same VM & see what I get...

here are hotspot columns ( 3 ):

Function                                                                                          Module                  CPU Time:Self
------------------------------------------------------------------------------------------------ ---------------------- -------------
KiFastSystemCallRet                                                                               ntdll.dll                       4.152
func@0x1006b351                                                                                   MSO.DLL                         0.984
func@0x10008f53                                                                                   OLMAPI32.DLL                    0.980
func@0x101608d1                                                                                   MSO.DLL                         0.802
func@0x1015b0bc                                                                                   MSO.DLL                         0.241
func@0x100048c0                                                                                   MSPST32.DLL                     0.204
CUserThread::SendRequest                                                                    mydll.dll                     0.186

Summary is attached.

Looks like most of the CPU

Bernard — Wed, 20 Aug 2014 08:22:18 GMT

Looks like most of the CPU time is spent in kernel-to-user mode stub function. Does your code frequently call into kernel mode?

The application being

L_K_ — Wed, 20 Aug 2014 13:08:55 GMT

The application being profiled is Microsoft Outlook so that's expected. It's not the point, however. We are trying to figure out where did the Call counts go...Peter was looking for a meaningful value for CPI as well.

They are unexpected results.

Peter_W_Intel — Wed, 20 Aug 2014 14:16:25 GMT

They are unexpected results.

Event summary
-------------
Hardware Event Type               Hardware Event Count:Self  Hardware Event Sample Count:Self  Events Per Sample
--------------------------------  -------------------------  --------------------------------  -----------------
INST_RETIRED.ANY                                          0                                 0  2700000          
CPU_CLK_UNHALTED.THREAD                                   0                                 0  2700000          
CPU_CLK_UNHALTED.REF_TSC                        46382069573                             23191  2000003

No sample are collected for INST_RETIRED.ANY and CPU_CLK_UNHALTED.THREAD, so there is no CPI value.

And, no "call count" column in hotspots report.

> Does VTune support advanced hotspots on VMware Workstation ( Win 7 guest & Host )?

No. You have to work on native operation system.

You can run basic-hotspots, concurrency, and locksandwaits on VMware workstation with Win 7, because they are user-mode sampling and no PMU resource access.

Already then. Once I get a

L_K_ — Wed, 20 Aug 2014 14:23:04 GMT

Already then. Once I get a chance I'll try without virtualization.

Quote:L K. wrote:

Bernard — Wed, 20 Aug 2014 17:44:07 GMT

L K. wrote:

The application being profiled is Microsoft Outlook so that's expected. It's not the point, however. We are trying to figure out where did the Call counts go...Peter was looking for a meaningful value for CPI as well.

I was under assumption that it was your application.