topic Aps doesn't work with speical application in Analyzers

Aps doesn't work with speical application

oleotiger — Thu, 25 Mar 2021 07:40:43 GMT

I'm using oneapi 2021.1.1 on centos7.6.

I wanna profiling mpi application with aps but it works when I run wrf but fails when I run lammps.

So I tries to run the application locally.

When I run wrf independently without aps `./wrf`, there is normal output from wrf and it runs correctly. With aps `aps ./wrf`, there is normal output as well.

When I run lammps indenpendently without aps `./lmp -sf opt -in in.lj` , I can get normal output of lammps and it runs correctly.

When I run lammps indenpendently with aps `aps ./lmp -sf opt -in in.lj` , the output stucks at the start. I can only get:

-------------------------------------------------------------------------- WARNING: There is at least non-excluded one OpenFabrics device found, but there are no active ports detected (or Open MPI was unable to use them). This is most certainly not what you wanted. Check your cables, subnet manager configuration, etc. The openib BTL will be ignored for this job. Local host: 6248r-node125 -------------------------------------------------------------------------- LAMMPS (5 Jun 2019)

There are vtune and aps processes:

root 40684 31718 0 15:36 pts/49 00:00:00 aps ./lmp -sf opt -in in.lj root 40688 40684 0 15:36 pts/49 00:00:00 /opt/compiler/intel/oneapi/vtune/2021.1.1/bin64/vtune -q -collect mps -mrte-mode=native -data-limit=0 -finalization-mode=none -r /tmp/aps_temp_1804289392masterResult -- ./lmp root 40715 40710 0 15:36 pts/49 00:00:00 ./lmp

But I cannot see any log from lammps. Normally it will run about 3~5s. But with aps It stucks at start least 1min and I didn't wait for its ending and killed it.

Re:Aps doesn't work with speical application

RaeesaM_Intel — Fri, 26 Mar 2021 11:01:28 GMT

Hi,

Thank you for posting in Intel Analyzers Forum.

Could you please share a sample reproducer code and steps to reproduce?

Regards,

Raeesa

Re: Re:Aps doesn't work with speical application

oleotiger — Sat, 27 Mar 2021 01:21:44 GMT

'm running lammps https://lammps.sandia.gov.

lammps (https://lammps.sandia.gov/tars/lammps-30Nov20.tar.gz) is compiled with FFTW https://github.com/FFTW/fftw3/archive/fftw-3.3.8.tar.gz with gcc9.3.0

Workload is in.lj (https://lammps.sandia.gov/bench.html).

Normally, run it with `./lmp -sf opt -in in.lj`.

With aps it failed with no response `aps ./lmp -sf opt -in in.lj`

Re: Re:Aps doesn't work with speical application

Dmitry_P_Intel1 — Mon, 29 Mar 2021 08:59:31 GMT

Hello,

The issue might be related to https://community.intel.com/t5/Analyzers/APS-tool-from-VTune-s-package-loses-application-arguments/m-p/1231211#M19654 . Please follow the recommendation to use a wrapper script to workaround the aps issue with the app parameters.

Thanks & Regards, Dmitry

Re:Aps doesn't work with speical application

RaeesaM_Intel — Thu, 01 Apr 2021 11:10:07 GMT

Hi ,

Is your issue resolved? Did you check it with the latest version Vtune 2021.2.0 as mentioned in https://community.intel.com/t5/Analyzers/APS-tool-from-VTune-s-package-loses-application-arguments/m-p/1231211#M19654 .

Please let us know the updates.

Regards,

Raeesa

Re:Aps doesn't work with speical application

RaeesaM_Intel — Thu, 08 Apr 2021 12:44:14 GMT

Hi,

Can you give us an update on this ? Is your issue resolved ?

Raeesa

Re:Aps doesn't work with speical application

RaeesaM_Intel — Thu, 08 Apr 2021 15:58:08 GMT

Hi,

Thank you for accepting the solution. If you need any additional information, please submit a new question as this thread will no longer be monitored.

Regards,

Raeesa