topic Re: problem with remote reset to bios in Intel® Business Client Software Development

problem with remote reset to bios

feyd — Wed, 29 Aug 2007 13:07:39 GMT

When I send command "remote reset to bios" to computer with motherboard Gigabyte 965QM-DS2 and bios Award Modular BIOS v6.00PG Release Date 19 January 2007. I get message NOT_PERMITTED. I also have a problem with DHCP, when Intel AMT is running with this mode, before system boting I receive message "iAMT is not configured".

Re: problem with remote reset to bios

Sreelekshm_S_Intel — Wed, 29 Aug 2007 16:37:12 GMT

Hi,

Did you get into the MEBx and configured AMT? You could do this by hitting ctrl + P while the system is booting up. Also, please make sure that you have installed all the required drivers.

Thanks,

Sree

Re: problem with remote reset to bios

feyd — Thu, 30 Aug 2007 05:24:56 GMT

Yes, I configured AMT and it works well with all other command, but still i can not get remoting access to bios.

Re: problem with remote reset to bios

Sreelekshm_S_Intel — Thu, 30 Aug 2007 14:04:09 GMT

Hi,

Just wanted to make sure that you have enabled SOL/IDE-R in MEBx. Are you able to boot to a remote CD/floppy image?

Thanks,

Sree

Re: problem with remote reset to bios

feyd — Fri, 31 Aug 2007 07:50:02 GMT

Hello,
Yes, it works well, the only problem is remote to bios.

Re: problem with remote reset to bios

Sreelekshm_S_Intel — Fri, 31 Aug 2007 16:13:40 GMT

Hi,

This seems to be an issue with SMS add on. Please go to this link below and click on the support link to submit your question:

http://software.intel.com/en-us/articles/intel-client-manageability-add-on-for-microsoft-sms-2003

Regarding the DHCP issue, are you able to connect to the AMT system through WebUI? You can do this by http://ipaddress:16992 . And after that, disconnect it and reboot the system. See if you are seeing the message again.

Thanks,

Sree