topic AMT DTK Question in Intel® Business Client Software Development

AMT DTK Question

pieno — Fri, 07 Mar 2008 23:11:47 GMT

i need help using AMT DTK

when using the commander i have a problem with "take control "

in the redirection

i am trying to remotely set up windows from a local CD-drive

the problem here is the redirection option can't be activated before i add img file to the flobby drive and CD in the CD-drive

then i make reboot to remote CD drive and the windows installation begins

that makes a problem while intalling windows as theit installs it shows a message "if there's a disk in the flobby drive try to remove it "

and then it restarts begining the installation again

any help wz this ??

Re: AMT DTK Question

Sreelekshm_S_Intel — Sat, 08 Mar 2008 18:27:38 GMT

Hi,

Which version of DTK are you using? Also, what is your AMT version?

Thanks,

Sree

Re: AMT DTK Question

pieno — Sun, 09 Mar 2008 13:23:12 GMT

AMT DTK ver. 0.48
AMT ver 2.0
tx in advance

Re: AMT DTK Question

pieno — Sun, 09 Mar 2008 15:50:17 GMT

sorry a little correction

the AMT ver is 2.1.0

Re: AMT DTK Question

Ylian_S_Intel — Mon, 10 Mar 2008 22:10:14 GMT

Hi. Oh yes, the way Intel AMT works, you must have both a CDROM and a Floppy image for IDE-R to work. You cannot do just one or the other. I am not sure how to fix your problem except that you should try using an empty floppy. There is no way the computer would be able to boot on an empty floppy disk.

If you have a real floppy disk drive on the console, you can then remove the floppy disk from the drive. Sadly, if you use a floppy image, there is no way to remove it.

Ylian (Intel AMT Blog)