Add Intel Device to CSC database

Dave_J_ — Fri, 02 Jun 2017 13:50:33 GMT

Hi,

Currently playing around with intel AMT.

For now I'm using the Intel SCS console to Provision Intel AMT devices in Admin mode for this I'm creating an USB flash drive from within the intel SCS console.

The profile i'm using:

Network Settings
FQDN will be the same as the DNS Look Up FQDN
IP will be taken from DHCP

Active Directory Integration
Active Directory OU:OU=AMT Provisioned Computers,DC=fluxlab,DC=local
Access Control List (ACL)
User 1: S-1-5-21-477876300-3805782020-1689048269-1196
User Type: Active Directory
User has remote access to the realms listed below
Realms: PT Administration

Transport Layer Security (TLS)
Server authentication used for remote interface
Server Authentication Certificate Properties:
Certificate Authority: LAB-PKI-01.fluxlab.local\fluxlab-LAB-PKI-01-CA
Certificate Template: AMTClientConfigurationCertificate
Common Names (CNs) in certificate: DNS Host Name (FQDN), Host Name, SAM Account Name, User Principal Name, UUID

Network Configuration
WiFi
Do not enable synchronization of Intel® AMT with host platform WiFi profiles

System Settings
Enabled Management Interfaces:
Web UI
Serial Over LAN
IDE Redirection
KVM
RFB password not defined

Power Management Settings: Always On (S0-S5), Timeout if idle: 3 minutes
The Intel® AMT clock will not be synchronized with the operating system clock
Intel® AMT set to respond to ping requests
Fast Call for Help (within the enterprise network) is Enabled

so far so good => this works, the intel amt is in configured and in admin mode

I would like to have the intel amt device also in the SCS/RCS database. Apparently provisioning AMT does not automatically add it to RCS/SCS console.

When using ACUConfig.exe /verbose /output console NotifyRCS RCSserver i get the following message:

Exit with code 107

Details:Notify RCS operation Failed.

Failed to get the FQDN of the Intel(R) AMT device

when i boot into MEBx using CTRL+P I'm able to fill in the hostname, wich solves the above problem.

My question is now how can I enter the hostname automatically (for example from command line) or wat is the best approach to get the AMT provisioned and have it registered in SCS/RCS

topic Add Intel Device to CSC database in Intel® Business Client Software Development

Add Intel Device to CSC database