topic Re: programming failed cyclone 10 lp in Embedded Server

programming failed cyclone 10 lp

mdidomenico4 — Sun, 04 Jan 2026 00:54:54 GMT

i just picked up a Cyclone 10 LP board (10CL025YU256I7G). this is my first foray into FPGA's. I have Quartus installed and successfully compiled the c10lp_golden_top program from the examples. however, when i go to into the programmer, i can see the board in the drop down and the file is selected, but when i click start it waits for 2 seconds and the reports "failed". i'm not sure what's going wrong. i was also able to run the board_test_system program and i can see the board from windows. can anyone lend a suggestion?

Re: programming failed cyclone 10 lp

mdidomenico4 — Sun, 04 Jan 2026 01:21:12 GMT

i worked through the tutorial at https://www.intel.com/content/www/us/en/developer/articles/training/program-fpga-device/cyclone.html which seemed to work. i'll have to keep poking at things, i'm sure i was doing something wrong

Re: programming failed cyclone 10 lp

Diego_INTEL — Fri, 09 Jan 2026 17:20:28 GMT

Hello @mdidomenico4,

Thank you for contacting Intel Embedded Community.

That's good news, just to let you know if you need further help, please check the following regarding FPGA:

FPGA community forums and blogs have moved to the Altera Community. Existing Intel Community members can sign in with their current credentials.

Best regards,

@Diego_INTEL