topic Re: Intel GPIO Configuration Tool for BayTrail-I in Embedded Intel Atom® Processors

Intel GPIO Configuration Tool for BayTrail-I

idata — Mon, 25 May 2015 10:02:47 GMT

Hi,

I download Intel GPIO Configuration Tool which supports the following microprocessors: Broxton processor, BayTrail-T/CR processor and CherryTrail-T processor. May somebody tell me where I can download this tool for BayTrail-I processor ?

Re: Intel GPIO Configuration Tool for BayTrail-I

idata — Mon, 25 May 2015 17:07:58 GMT

Hello Anteja.

Welcome back to the Intel® Embedded Community.

We are checking your thread and will post an update as soon as possible.

Regards.

Jimmy.

Re: Intel GPIO Configuration Tool for BayTrail-I

idata — Tue, 26 May 2015 20:29:12 GMT

Hello Anteja,

the document you're looking for can be downloaded here:

http://www.intel.com/content/www/us/en/secure/embedded/nda/products/bay-trail/atom-processors-gpio-configuration-tool.html Bay Trail and Cherry Trail Platform, Intel GPIO Configuration Tool (GCT) - Software Tools - Rev 2.0.3

This document is classified as 'Intel Confidential' so you need to have a Privileged EDC account. Currently you have a Basic account so I would like to help you apply for a Privileged account.

Here are the steps:

1) Go to http://edc.intel.com/ http://edc.intel.com and login using your Basic credentials. (SIGN IN is located in the upper right of the page).

2) The go to https://www-ssl.intel.com/content/www/us/en/intelligent-systems/embedded-design-center-contact-us.html https://www-ssl.intel.com/content/www/us/en/intelligent-systems/embedded-design-center-contact-us.html and you will see MANAGE YOUR INTEL EDC ACCOUNT.

3) Click on MANAGE MY INTEL PROFILE

4) You should see an option to UPGRADE to PRIVILEGED. Complete and submit the form.

5) Let me know when you have done this. I will coordinate getting your application reviewed as quickly as possible.

Hope this helps.

Regards,

Jimmy.

Re: Intel GPIO Configuration Tool for BayTrail-I

idata — Thu, 28 May 2015 08:24:45 GMT

Hello Jimmy,

My chief have privileged and he dowloaded for me intel GCT, but it don't work on MinnowMax board. I want to know if Intel have GCT for baytrail-I.

Re: Intel GPIO Configuration Tool for BayTrail-I

idata — Fri, 29 May 2015 22:48:05 GMT

Hi Anteja,

That's correct, there's no gct tool for the Bay Trail -I. According to the help document that comes with the gct tool, page 6:

Note:

Currently this solution has been tested only on Broxton, Bay Trail –T/CR and Cherry Trail – T/CR platforms, and the architecture provides readiness to support any future platforms.

Best regards,

Jimmy.