topic Re: Regarding I2C timing details in Embedded Intel Atom® Processors

Regarding I2C timing details

Rak1 — Tue, 01 Aug 2023 12:00:35 GMT

Hi,

Greetings from HCL Technologies,

Please help me on providing the I2C timing details for intel atom x6425RE.

Below shown reference snaps are the required timing parameters for I2C interface.

Thanks and Regards,

Rak**bleep**ha Y S

Re: Regarding I2C timing details

CarlosAM_INTEL — Wed, 02 Aug 2023 01:36:05 GMT

Hello, @Rak1:

Thank you for contacting Intel Embedded Community.

The information that may help you is stated in section 18.2.10, on page 236 of the following document:

https://cdrdv2.intel.com/v1/dl/getContent/636112

Best regards,

@CarlosAM_INTEL.

Re: Regarding I2C timing details

Rak1 — Fri, 04 Aug 2023 03:54:33 GMT

Hello @CarlosAM_INTEL,

Thanks for the response,

I checked https://cdrdv2.intel.com/v1/dl/getContent/636112 link, however I didn't get the required details.

Could please share the Snap of I2C timing details.

Thanks and Regards,

Rak1

Re: Regarding I2C timing details

CarlosAM_INTEL — Fri, 04 Aug 2023 22:07:15 GMT

Hello, @Rak1:

Thanks for your reply.

Based on our previous suggestion, as a reference, you may find the requested information on page 48 of the document stated in the following website:

https://web.archive.org/web/20121017153327/http://www.nxp.com/documents/user_manual/UM10204.pdf

Best regards,

@CarlosAM_INTEL.

Re: Regarding I2C timing details

Rak1 — Wed, 09 Aug 2023 11:39:45 GMT

Hello @CarlosAM_INTEL.

Thanks for the response.

The shared link is for NXP processor. Could you please share for intel atom x6425RE.

Thanks and Regards,

@Rak1

Re: Regarding I2C timing details

CarlosAM_INTEL — Thu, 10 Aug 2023 12:41:35 GMT

Hello, @Rak1:

Thanks for your reply.

It seems that you do not understand our previous communications.

Please allow us to paraphrase them.

We suggested in our first reply the following yellow-highlighted information:

Based on this information, the Intel Atom® x6425RE Processor supports the I2C Bus Specification version 5, as you may notice also in the section, page, and document mentioned in our first communication.

Due to these facts, the requested information should be stated in the I2C Bus Specification version 5 document, which is the one provided in our last message. This document applies to all the devices that support the cited specification and not only to the cited third-party manufacturer processors.

We hope that this information may clarify our previous communications.

Best regards,

@CarlosAM_INTEL.

Re: Regarding I2C timing details

Rak1 — Fri, 11 Aug 2023 11:34:40 GMT

Hello @CarlosAM_INTEL.

Thanks for the clarification.

Thanks and Regards,

@Rak1