topic Re: [EHL] cannot read or write external PHY register by MDIO under shell. in Embedded Intel Atom® Processors

[EHL] cannot read or write external PHY register by MDIO under shell.

ScottLiao — Fri, 23 Dec 2022 02:06:20 GMT

Dear Sir,

My platform is Elkhart lake with two SGMII Gbe, GPY115 on Intel® PSE TSN GbE Controller #0 and Intel® PSE TSN GbE Controller #1. Both of Phy address is 0x01 and Host owned with pin muxed.

GPY115 can work well under Windows 10 but I cannot read or write external PHY register by MDIO under shell.

I use MAC_MDIO_ADDRESS - 0ffset 200h and MAC_MDIO_DATA- 0ffset 204h in TSN GbE Memory Mapped Registers to access MDIO by Clause 45.

For example, I want to read STD_PHYID1(Register 0.2).

1. Write 0x00020000 to Memory base address + 0x204

2. Write 0x00204B03 to Memory base address + 0x200

3. Write 0x00204B0F to Memory base address + 0x200

4. Read GMII Data of STD_PHYID1 from Memory base address + 0x204: Bit0~Bit15

I expect to read STD_PHYID1 but the value is 0xFFFF.

It is no problem to access MDIO – Adhoc PHY Sublayer Registers by Clause 45 under UEFI shell but cannot access external PHY GPY115 register.

May I know how to access external PHY register under UEFI shell successfully?

Best Regards,

Re: [EHL] cannot read or write external PHY register by MDIO under shell.

CarlosAM_INTEL — Sat, 24 Dec 2022 00:58:54 GMT

Hello, @ScottLiao:

Thank you for contacting Intel Embedded Community.

We sent an email to the address related to this account with information that may help you.

Best regards,

@CarlosAM_INTEL

Re: [EHL] cannot read or write external PHY register by MDIO under shell.

BAE_MANE — Thu, 07 Sep 2023 14:49:50 GMT

Dear Carlos

We face a similar problem but with three TI SGMII PHYs (DP83869HM).

Do you have any suggestions on how to work with the MDIO on EHL?

Regards

Martin