topic Re: How to apply VSCC for our SPI NOR Flash in Embedded Intel Atom® Processors

How to apply VSCC for our SPI NOR Flash

WillisChang — Fri, 30 May 2025 01:37:40 GMT

Hi Sir,

How to apply VSCC for our SPI NOR Flash

(Serial Flash Devices Added to the VSCCOMMN.bin File)

Re: How to apply VSCC for our SPI NOR Flash

Diego_INTEL — Sat, 31 May 2025 03:03:27 GMT

Hello @WillisChang,

Thank you for contacting Intel Embedded Community.

You can use a tool like FIT to create a file that you can save in the SPI with a tool like a Dediprog.

"The Vsccommn.bin file is used by Flash Image Tool (FITC) and MEManuf tool to select a serial flash device listed, to create flash image, and to check if the Intel® Management Engine (Intel® ME) and BIOS VSCC customer created matches the VSCC entry in the vsccommn.bin."

Best regards,

@Diego_INTEL

Re: How to apply VSCC for our SPI NOR Flash

WillisChang — Mon, 02 Jun 2025 00:31:35 GMT

Hi Sir.

How can I add the Bytera Memory 's Flash device (part number) into this document list (Vendor Specific Component Capabilities
(VSCC) Comm.bin Content for 2025 Platforms) ?

Please advise as well.

Re: How to apply VSCC for our SPI NOR Flash

Diego_INTEL — Fri, 06 Jun 2025 17:18:30 GMT

Hello @WillisChang,

I think you can refer to a Distributor Partner and look for an Intel Sales Representative to make the consultation.

https://www.intel.com/content/www/us/en/partner/showcase/partner-directory/distributor.html#sort=relevancy

Best regards,

@Diego_INTEL