coreboot + fsp for braswell n3150

sbass — Tue, 08 Nov 2016 19:00:46 GMT

Hello,

I use coreboot and fsp for initialize braswell n3150, but i have an issue : Failures for postcode 0xBB - failed in the FSP: 0x02 - FSP_INVALID_PARAMETER: Input parameters are invalid.

In the config of coreboot , i don't have microcode update .

In documentation of coreboot :coreboot/Documentation/Intel/SoC/soc.html# TempRamInit

" Alternating 0xbb and 0x02 - TempRamInit executed, no CPU microcode update found"

But i downloaded microcode.dat for braswell on intel site. i don't have signature 0x406c3 corresponding in microcode.dat .

if no update for microcode, i have no need integrate microcode in coreboot.rom ? else how to do ?

Re: coreboot + fsp for braswell n3150

CarlosAM_INTEL — Tue, 08 Nov 2016 21:49:57 GMT

Hello keziaha,

Thank you for contacting Intel Embedded Community.

Please verify that affected design has implemented the guidelines stated as a reference at the https://www.coreboot.org/pipermail/coreboot-gerrit/2016-January/037856.html Patch set updated for coreboot: soc/braswell: CPUID for D0 stepping.

We hope that this information may help you.

Best Regards,

Carlos_A.

topic coreboot + fsp for braswell n3150 in Embedded Intel® Core™ Processors

coreboot + fsp for braswell n3150

Re: coreboot + fsp for braswell n3150