topic Re: eepromARMtool src in Embedded Intel® Core™ Processors

eepromARMtool src

MPodl — Tue, 13 Dec 2016 20:53:08 GMT

I'm looking for the eepromARMtool source so we can

program the iNVM of the i210 on one of our

networking switch products. We need it to run

in copper flash-less mode(devid 157b). The parts

are currently blank(devid 1531).

Thanks,

Mark

mailto:podlipec@avaya.com podlipec@avaya.com

Re: eepromARMtool src

CarlosAM_INTEL — Tue, 13 Dec 2016 21:17:09 GMT

Hello, mpodlipec:

Thank you for contacting Intel Embedded Community.

In order to help you will contact you via email.

Best regards,

Carlos_A.

Re: eepromARMtool src

TRich5 — Tue, 24 Jan 2017 00:32:50 GMT

I also need the source for this tool.

Re: eepromARMtool src

CarlosAM_INTEL — Tue, 24 Jan 2017 16:59:14 GMT

Hello, Trampus:

Thank you for contacting Intel Embedded Community.

In order to help you will contact you via email.

Best regards,

Carlos_A.

Re: eepromARMtool src

TRich5 — Tue, 24 Jan 2017 22:20:11 GMT

The link that was sent isn't allowing me access. I keep getting the error:

Not Allowed

The resource you requested cannot be accessed directly.For assistance, please contact us https://signin.intel.com/Contact here.

Tue, 24 Jan 2017 17:27:01 GMT

https://ssso.intel.com/CustomError/Default/10403 Hide details

HTTP status: 403 Forbidden Code: 10403 v1.0.3

Re: eepromARMtool src

Gabriel_T_Intel — Tue, 24 Jan 2017 22:45:04 GMT

Hello Trampus:

We have sent you the file.

If you have any other question, please let us know.

Gabriel Thomas.

Re: eepromARMtool src

TRich5 — Tue, 24 Jan 2017 23:21:13 GMT

Where was the file sent to? I still can't download the file from the Link in the email.

Re: eepromARMtool src

CarlosAM_INTEL — Wed, 25 Jan 2017 13:36:45 GMT

Hello, Trampus:

In order to help you, could you please tell us if you have received our second email of yesterday (01/24/2017 10:30 AM PST)? Because it has attached the information that may help you.

Thanks in advance for your confirmation.

Best regards,

Carlos_A

Re: eepromARMtool src

TRich5 — Wed, 25 Jan 2017 16:56:37 GMT

I got it!

Thanks a lot!

--Trampus

Re: eepromARMtool src

MFuch2 — Fri, 27 Jan 2017 08:31:12 GMT

Hi,

same here. We have our boards up and running with Intel i210-AT detected on PCIe. But next step would be programming the iNVM (chip is running flash-less).

So programming tool for ARM or probably sourcecode and reference images would be fine. I just applied or a priviledged account, hope this does not take long.

Regards,

Matthias

Re: eepromARMtool src

CarlosAM_INTEL — Fri, 27 Jan 2017 16:48:19 GMT

Hello, MFuchs:

Thank you for contacting Intel Embedded Community.

The information you seek is classified as Intel confidential which requires a CDNA between your company and Intel as well as a Privileged EDC account. Due to this fact, please let us know as soon as you have your privileged account.

Please use the channels listed at the http://www.intel.com/content/www/us/en/design/support/account-support.html Account Support website to help you with any inconveniences with the cited process.

Best regards,

Carlos_A.

Re: eepromARMtool src

MItri — Mon, 30 Jan 2017 12:59:55 GMT

Hi Carlos,

we are also interrested in getting the source. Is there are similar tool / source for other achitecturs / OS's (x86 / ppc / ...)? We have different target operating systems like vxWorks, QNX, Linux, RTOS32 - so we need to do some work anyway - we will take what we can get. We should have an actual signed CNDA. Please let me know what you need from me to go ahead.

Kind regards - Marc

Re: eepromARMtool src

CarlosAM_INTEL — Mon, 30 Jan 2017 15:52:01 GMT

Hello, MFuchs:

We have noticed that your privileged account has been approved.

In order to help you, we will contact you via email.

Best regards,

Carlos_A.

Re: eepromARMtool src

CarlosAM_INTEL — Mon, 30 Jan 2017 16:12:21 GMT

Hello, MItrich:

Thank you for contacting Intel Embedded Community.

In order to help you, we will contact you via email.

Best regards,

Carlos_A.

Re: eepromARMtool src

MFuch2 — Tue, 31 Jan 2017 09:39:55 GMT

Hello Carlos_A,

thanks. The tool arrived and runs on our ARM platform.

I encountered some issues with the tool. But I will post that into a different topic.

Regards,

Matthias

Re: eepromARMtool src

idata — Fri, 19 May 2017 14:35:35 GMT

Hello,

I also require the eepromARMtool sources...

Can you help me out? Thanks

Regards,

Leonard A.

Re: eepromARMtool src

CarlosAM_INTEL — Fri, 19 May 2017 15:17:10 GMT

Hello, Leo_A :

Thank you for contacting Intel Embedded Community.

The eepromARMtool can be sent to you if you have an Embedded Design Center (EDC) Privileged account. In order to request an upgrade from your Basic EDC account to Privileged, go to http://www.intel.com/content/www/us/en/design/support/account-support.html and click on "Manage Your Intel Profile" found in the "Manage Your Account" section of the page. From there you can request an upgrade. The application can be found at:

https://www-ssl.intel.com/content/www/us/en/forms/design/registration-privileged.html

In order to help you with the EDC account update process, we suggest you use a business email address to evade any inconvenience.

We hope that this information may help you to solve this situation.

Best regards,

Carlos_A.

Re: eepromARMtool src

CarlosAM_INTEL — Fri, 19 May 2017 18:30:36 GMT

Hello, Leo_A:

It is important to let you know that the EDC privileged account is totally different than the Resource & Design Center (RDC) privileged account.

Due to this fact, we suggest you follow the procedure stated in my previous communication.

We hope that this information may help you.

Best regards,

Carlos_A.

Re: eepromARMtool src

idata — Mon, 22 May 2017 17:26:22 GMT

Hello. Could you please send me the link for the eepromARMtool source code? I need to attempt cross compilation for ppce5500, in case pre-programming does not succeed on our board arriving soon. Thanks.

Re: eepromARMtool src

CarlosAM_INTEL — Mon, 22 May 2017 18:36:53 GMT

Hello, ewaugh:

Thank you for contacting Intel Embedded Community.

In order to help you, we will contact you via email.

Best regards,

Carlos_A.