topic Re: eepromARMtool in Embedded Intel® Core™ Processors

eepromARMtool

JDubo5 — Thu, 28 Sep 2017 14:41:16 GMT

Where do I get the eepromARMtool source code so I can program the NVM of the i210 on one of our ARM based embedded products?

Re: eepromARMtool

CarlosAM_INTEL — Thu, 28 Sep 2017 15:49:46 GMT

Hello, jsdmichaud1 :

Thank you for contacting Intel Embedded Community.

In order to help you, we will contact you via email.

Best regards,

Carlos_A.

Re: eepromARMtool

宾胡 — Wed, 11 Oct 2017 02:19:01 GMT

Hi Carlos,

Could you provide a copy of eepromarmtool for me? Thanks!

Best regards!

hubin

Re: eepromARMtool

CarlosAM_INTEL — Wed, 11 Oct 2017 14:25:04 GMT

Hello, hubin:

Thank you for contacting Intel Embedded Community.

In order to help you, we will contact you via email.

Best regards,

Carlos_A.

Re: eepromARMtool

NBart5 — Wed, 08 Nov 2017 08:44:07 GMT

Hi Carlos,

I also need to program the NVM of the i211 ethernet controller. Could you contact me so that I can get access to the eepromARMtool? Thanks!

Best regards,

Nicolas

Re: eepromARMtool

CarlosAM_INTEL — Wed, 08 Nov 2017 13:01:02 GMT

Hello, Nicolas :

Thank you for contacting Intel Embedded Community.

In order to help you, you need to have an Embedded Design Center (EDC) privileged account that should be requested by filling out the https://signin.intel.com/ContactUs Contact Us form.

We hope that this information may help you.

Best regards,

Carlos_A.

Re: eepromARMtool

NBart5 — Wed, 15 Nov 2017 09:00:48 GMT

Hi Carlos,

I have been granted privileged access to the EDC. How can I get access to the eepromARMtool now?

Best regards,

Nicolas

Re: eepromARMtool

CarlosAM_INTEL — Wed, 15 Nov 2017 14:45:52 GMT

Hello, Nicolas:

Thanks for your update.

In order to help you, we will contact you via email.

Best regards,

Carlos_A.

Re: eepromARMtool

AZhu — Wed, 22 Nov 2017 11:01:06 GMT

Dear Carlos A

I do also need eepromARMtool. And I do also have account.

Could you please advise how I can get the tool.

Thank you.

Re: eepromARMtool

CarlosAM_INTEL — Wed, 22 Nov 2017 15:31:52 GMT

Hello, anthonyzhu:

Thank you for contacting Intel Embedded Community.

In order to help you, we will contact you via email.

Best regards,

Carlos_A.

Re: eepromARMtool

AZhu — Mon, 27 Nov 2017 04:40:17 GMT

Dear Carlos_A

I can't dump and there is a Bus error. Is there anything I need to change?

By the way, I'm using i210 with external flash.

Re: eepromARMtool

CarlosAM_INTEL — Mon, 27 Nov 2017 14:38:15 GMT

Hello, anthonyzhu:

Thanks for your reply.

In order to be on the same page, could you please tell us if the affected i210 design is a third party device or it is your own design? In case that it is a third party one, please let us know all the information related to it? In case that it is your design, could you please clarify if it has been reviewed by Intel?

Please let us know the information that may answer these questions to better help you.

Best regards,

Carlos_A.

Re: eepromARMtool

AZhu — Tue, 28 Nov 2017 04:20:56 GMT

Dear Carlos_A

It's our own design & this circuit have been used by Intel x86 system in many projects.

It's with 8Mbit external flash . LAN function is ok if I mount eeprom which is already have data(FW & MAC) in it.

Can I contact you by mail?

Thanks.

Re: eepromARMtool

CarlosAM_INTEL — Tue, 28 Nov 2017 13:38:22 GMT

Hello, anthonyzhu:

Thanks for your reply.

We suggest you verify that the affected fulfills the requirements stated as answers to the questions 2.10 and 2.23, on pages 7 and 9 of the https://www.intel.com/content/dam/www/public/us/en/documents/faqs/ethernet-controller-i210-i211-faq.pdf Intel(R) Ethernet Controller I210/I211Frequently Asked Questions (FAQs) document # 335346.

On the other hand, you can request a review of your design to Intel using the procedure stated at the https://edc.intel.com/Tools/Design-Review/Default.aspx?language=en Design Review Services website.

We hope that this information may help you to solve this inconvenience.

Best regards,

Carlos_A.

Re: eepromARMtool

UFink — Wed, 31 Jan 2018 13:36:34 GMT

Hi Carlos,

Could you provide a copy of eepromarmtool for me? Thanks!

Best regards!

Ulrich

Re: eepromARMtool

CarlosAM_INTEL — Wed, 31 Jan 2018 17:02:21 GMT

Hello, IesY1:

Thank you for contacting Intel Embedded Community.

In order to help you, you need to have an Embedded Design Center (EDC) privileged account that should be requested by filling out the https://signin.intel.com/ContactUs Contact Us form.

We hope that this information may help you.

Best regards,

Carlos_A.