topic Re: WHL RVP CRB doesn't Start in Embedded Intel® Core™ Processors

WHL RVP CRB doesn't Start

tallu — Tue, 17 Nov 2020 17:31:58 GMT

For some reason the CRB doesn't start.

Before starting playing with it I read the BIOS flash and save the flash image.

After doing that I power it on but got BIOS error (POST) 0x96 (clear hugh ES segment register).

I wasn't sure what the problem was I decided flashing the BIOS image I previously read and now I get a diffrenet error: EC05 (which I guess is EC error).

What may be the problem?

How can it be fixed?

Is there a place where I can check the required jumpers configuration of the CRB?

Is there a ready to flash IFWI image for this CRB?

BTW, a question in another subject. Does Intel ship these CRB's which CPU fused with BootGuard enabled?

Regards,

Tal

Re: WHL RVP CRB doesn't Start

CarlosAM_INTEL — Tue, 17 Nov 2020 21:15:01 GMT

Hello @tallu:

Thanks for contacting Intel Embedded Support.

You should review the procedures stated in the Whiskey Lake U Platform RVP Customer Reference Board (CRB) User Guide document # 595776, which should be followed.

You should follow the steps stated in section 4.3, on pages 19 and 20 of the cited user guide, and using the Whiskey Lake Reference Platform RVP CRB BIOS document # 573420 to reprogram the BIOS in the affected CRB if it is needed.

You can find the listed User Guide and BIOS when you are logged into your Resource and Design Center (RDC) privileged account on the following websites:

https://cdrdv2.intel.com/v1/dl/getContent/565776

https://cdrdv2.intel.com/v1/dl/getContent/573420

You should fill out the form stated on the following website when you have problems with the provided websites or want to update your RDC account:

https://www.intel.com/content/www/us/en/forms/support/my-intel-sign-on-support.html

Best regards,

@CarlosAM_INTEL.