topic Re: Xeon D-1559 Circuit Board Restarts Instead Of Shutdown in Embedded Intel® Core™ Processors

Xeon D-1559 Circuit Board Restarts Instead Of Shutdown

Siddhartha — Wed, 21 Jun 2023 08:22:00 GMT

Hi.

We have made a custom circuit board using the Xeon D-1559 processor.

Whether we use Windows 10 / CentOS 8 (Linux):

1. Our attempts to shutdown (poweroff) through GUI & command line don't work.

1.1. The circuit board goes through the usual steps to shutdown.

1.2. But after no signal is detected by our monitor (after scanning through VGA, DVI & HDMI), after a few seconds, the board restarts.

2. The only way we can poweroff is to manually switch off the chassis which contains our circuit board. Normal & long press on the circuit board's power button also does the same restart mentioned above, instead of shutdown.

3. So far, we've tried the following steps:

3.1. Turned off Wake on LAN in the BIOS. We searched in the BIOS for Wake on USB, but we couldn't find such a setting.

3.2. Tried some power management options in Windows 10 / CentOS 8 (Linux) according to suggestions we found on the Internet.

But nothing has worked. What do you advise ?

Thanks.

Re: Xeon D-1559 Circuit Board Restarts Instead Of Shutdown

Siddhartha — Wed, 21 Jun 2023 10:43:28 GMT

Should have typed:

2. The only way we can poweroff is to manually switch off the chassis which contains our circuit board. Normal & long press on the circuit board's power button also cause the same restart mentioned above, instead of shutdown.