topic ITP-XDP3 debugger not working with target in Embedded Intel® Core™ Processors

ITP-XDP3 debugger not working with target

Sergio_Triales — Mon, 09 Dec 2024 10:51:15 GMT

Hello, trying to use my ITP-XDP3 device to debug any developers board. ITP-XDP3 device not working, it can't connect to target device. I trying to use Intel System Studio 2020 Up-3. USB driver work correctly, Windows device manager see ITP-XDP, Intel system debugger device

When i start DAL diagnostic test, i get next log:

>>>Launching hardware recognition... 24.09.2024 18:08:31 Server.HI: PodPlugged [51542046] Devices Found: *) serial # --- Link Type a) 51542046 --- USB Choose ITP-Hardware from the above list: <string>:1: DeprecationWarning: object.__new__() takes no parameters ********************************************************************** * HARDWARE CONFIGURATION DETECTED Connection Detected Pod Type = XDP3B Pod ID = 51542046 Link Type = USB FPGA version(Pod)= None FPGA version(Xml)= 09020215 Driver version = 02000300 Assembly version = 00 ********************************************************************** >>>Launching MEM CONFIG test... BASEBOARD: *** FAILURE *** Sending Vendor Request. ERROR occured during script! >>>Launching Customer Diagnostics loopback test... XDP3 Customer Diagnostics Software Version 1.0 24.09.2024 18:11:10 XDP3 FPGA Image Revision: None XDP3 Board Type is XDP3B TEST: test_CUST_SETUP_XDP3 2024-09-24 18:13:31-HostWrapper CRITICAL: Exception XDP3B[312781e].WriteMemory( 0,5,0,False,None,None) Xdpa Write DMA request failed 2024-09-24 18:13:41-HostWrapper CRITICAL: Exception XDP3B[312781e].WriteMemory( 256,43,0,True,None,None) Xdpa Write DMA request failed 2024-09-24 18:14:26-HostWrapper CRITICAL: XDP3B[312781e]HostInterface.cancelRead(chn=0) Timeout45(s) 2024-09-24 18:14:36-HostWrapper CRITICAL: XDP3B[312781e].ResetAll-[fff9fff9] 2024-09-24 18:14:46-HostWrapper CRITICAL: XDP3B[312781e].Reset-USB[40004] TEST: test_CUST_SETUP_XDP3 FAILED!

I tested ITP-XDP debugger with two targets with Core i5 processors and it can't see both targets.

Is my ITP-XDP device is broken? Maybe i need to update FPGA firmware on device? I bought it in used condition to education embedded devices.

Re: ITP-XDP3 debugger not working with target

CarlosAM_INTEL — Mon, 09 Dec 2024 17:18:14 GMT

Hello, @Sergio_Triales:

Thank you for contacting Intel Embedded Support.

We have received your request but we need to address the following questions to understand it:

Could you please clarify if this request is related to a design developed by you or by a third-party company?

Could you please let us know the name of the manufacturer, the part number, and where we can find the information if this request is related to a third-party design?

If it is your design, please let us know the place of purchase of the cited Intel processors and their part numbers.

How do you obtain the Intel® In-Target Probe (Intel® ITP) eXtended Debug Port (XDP)?

Based on the email address related to your account, could you please confirm if your phone number is: +7 843 227 40 80?

We are waiting for your reply.

Best regards,

@CarlosAM_INTEL.

Re: ITP-XDP3 debugger not working with target

Diego_INTEL — Sat, 14 Dec 2024 04:44:18 GMT

Hello @Sergio_Triales,

I was checking this forum, besides my co-worker mentioned, I think you may try looking for any available guide first.

You can try looking for public information like the following:

You can check the "Get started..." documents:

https://www.intel.com/content/www/us/en/developer/tools/oneapi/system-bring-up-toolkit-documentation.html

Here is a video:

https://www.intel.com/content/www/us/en/developer/videos/collecting-processor-trace-in-intel-system-debugger.html

I hope this may be of help.

Best regards,

@Diego_INTEL

Re: ITP-XDP3 debugger not working with target

xmao — Tue, 16 Dec 2025 06:17:21 GMT

hello

I am currently debugging a development board equipped with the A3960 CPU. However, I don't have the same software as you do. But I do have hardware tools. Could you please send me your software so that I can complete the debugging work?

My email is <ww2742628020@outlook.com>

Thank you.

Re: ITP-XDP3 debugger not working with target

Diego_INTEL — Thu, 18 Dec 2025 19:44:16 GMT

Hello @xmao,

Thank you for contacting Intel Embedded Community.

Apollo Lake is not supported anymore but you still can try to access the available documentation for this platform.

https://www.intel.com/content/www/us/en/products/platforms/details/apollo-lake/docs.html

Best regards,

@Diego_INTEL