topic Re: Design for quad SFP+ module using Intel® Ethernet Controller X710-BM2 in Embedded Intel® Core™ Processors

Design for quad SFP+ module using Intel® Ethernet Controller X710-BM2

Thangvp — Sun, 04 May 2025 03:43:01 GMT

We are planning to use X710-BM2 into our design for quad SFP+ module support requirement to PCIe 3.0x4 lanes. Please share below documents-

1) OrCAD symbol for X710-BM2

2) Allegro Footprint for X710-BM2

3) EOL for X710-BM2

4) Refence design (.DSN and .BRD preffered) for X710-BM2

Please provide via my email: vpthang.sdh232@hcmut.edu.vn

Best regards,

Thangvp

Re: Design for quad SFP+ module using Intel® Ethernet Controller X710-BM2

Diego_INTEL — Tue, 06 May 2025 01:57:59 GMT

Hello @Thangvp,

Thank you for contacting Intel Embedded Community.

It seems that we don't have any Allegro layout symbol for X710-BM2.

You may check the following documents in RDC:
#523457 - Intel Ethernet Controller XL710 [Fortville] OrCad Symbol Files
#523455 - Intel® Ethernet Controller XL710 [Fortville] Cadence Symbol Files
#337000 - Intel® Ethernet Controller XL710: Reference Schematic
#615124 - Intel® Ethernet Controller XL710/82599 40/10 GbE Controller Schematic Checklist

Regarding the EOL, it is expected to be Target 1H'31.

#499897 - Intel EPG Product Lifecycle Guidance, page 11.

I hope this helps.

Best regards,

@Diego_INTEL

Re: Design for quad SFP+ module using Intel® Ethernet Controller X710-BM2

Thangvp — Tue, 06 May 2025 02:31:50 GMT

Hi @Diego_INTEL

I am sorry.

I am a new user so I don't know how to get the above information.

Can you help me by sending me the file?

Best Regards,

Thang Vo

Re: Design for quad SFP+ module using Intel® Ethernet Controller X710-BM2

Thangvp — Thu, 08 May 2025 08:42:37 GMT

Hi @Diego_INTEL

I can't read the instructions below. i want you help me to send file. so i am a new user, i dont access document.

You may check the following documents in RDC:
#523457 - Intel Ethernet Controller XL710 [Fortville] OrCad Symbol Files -> I can't access it.
#523455 - Intel® Ethernet Controller XL710 [Fortville] Cadence Symbol Files -> I can't access it.
#337000 - Intel® Ethernet Controller XL710: Reference Schematic -> I don't access.
#615124 - Intel® Ethernet Controller XL710/82599 40/10 GbE Controller Schematic Checklist -> I can't access it.

Regarding the EOL, it is expected to be Target 1H'31. -> I can't access it.

#499897 - Intel EPG Product Lifecycle Guidance, page 11. -> I can't access it.

Please guide me in detail. I am a new user so I don't have access. Please send file into my email.

Best Regards,

Thangvp

Re: Design for quad SFP+ module using Intel® Ethernet Controller X710-BM2

Diego_INTEL — Fri, 09 May 2025 23:50:32 GMT

Hello @Thangvp,

You will need a Premier account to get access to these links as a CNDA will be necessary and I can't simply send them to anyone. Please check the following link:

https://www.intel.com/content/www/us/en/support/articles/000058073/programs/resource-and-documentation-center.html

Best regards,

@Diego_INTEL

Re: Design for quad SFP+ module using Intel® Ethernet Controller X710-BM2

Thangvp — Thu, 15 May 2025 07:19:16 GMT

Hi @Diego_INTEL

Thank you for your patience in getting back to you.

I followed your instructions and was accepted. After that I accessed RDC. However, I did not find the content ID as you instructed above, specifically:

#523457 - Intel Ethernet Controller XL710 [Fortville] OrCad Symbol Files -> I can't access it.
#523455 - Intel® Ethernet Controller XL710 [Fortville] Cadence Symbol Files -> I can't access it.
#337000 - Intel® Ethernet Controller XL710: Reference Schematic -> I can't access it.
#615124 - Intel® Ethernet Controller XL710/82599 40/10 GbE Controller Schematic Checklist -> I can't access it.

Best Regards,

Thangvp