topic Programming the Dual Core Processor N2600 from the de2i-150. in Embedded Intel® Core™ Processors

Programming the Dual Core Processor N2600 from the de2i-150.

BFoll — Mon, 22 Feb 2016 21:31:36 GMT

Hey all,

Can someone give me some overview how to program the ntel® Atom™ Dual Core Processor N2600 from the de2i-150 devolpment board? I already googled somwhat and I found a device from around 3000$ for training / learining purpose is this too expensive so can someone advice?

Thanks a lot.

Re: Programming the Dual Core Processor N2600 from the de2i-150.

CarlosAM_INTEL — Mon, 22 Feb 2016 21:51:48 GMT

Hello BertF,

Thank you for contacting the Intel Embedded Community.

The information that may help you as a reference is stated in section 4.2, of the http://www.mouser.com/pdfdocs/My_First_Fpga.PDF My First FPGA for Altera DE2i-150 Board.

In case that you have more questions related to this device, please address them to the channels stated in chapter 5.1 of the mentioned document.

We hope that this information is useful to you.

Best Regards,

Carlos_A.

Re: Programming the Dual Core Processor N2600 from the de2i-150.

BFoll — Mon, 22 Feb 2016 22:14:23 GMT

Hey thanks for the reply but on the mention board is also a intel atom processor located apart from the fpga and I wondering how to program this by using the XDP header.

for this purpose I already find out that you can use following devices: https://designintools.intel.com/product_p/itpxdp3brext.htm ITP-XDP 3BR Kit however this seems to costly therfore I'm wondering if there are some alternatives?

Re: Programming the Dual Core Processor N2600 from the de2i-150.

CarlosAM_INTEL — Tue, 23 Feb 2016 15:20:42 GMT

Hello BertF,

Thanks for your reply.

In order to help you, please fill out the form stated at the https://designintools.intel.com/Articles.asp?ID=83 Contact Us Intel Design-In Tools Store with your request.

We hope that this information is useful to you.

Best Regards,

Carlos_A.