Wince 6: network bridging issue using intel 82574L

iferr4 — Fri, 20 May 2011 13:11:20 GMT

Hi all,

I'm using WinCE 6.0 on a MSC COM Express board based on an Intel Atom platform (CPU: Z520PT; Chipset Intel US15W).

The ethernet adapter is the Intel 82574L Gigabit Ethernet Controller.

I'm stuck because I'm trying to set up a network bridge between the Intel controller and a PCI add-on ethernet adapter (I have tried different boards..) but I can't.

I can't understand if the Intel Driver for WinCE 6 (e1q51ce6.dll) supports "Network bridging".

Theorically, that issue should concern the registry settings:

[HKEY_LOCAL_MACHINE\Comm\MBridge]

"DisplayName"="Microsoft Mac Bridge Miniport"

"Group"="NDIS"

"ImagePath"="MBridge.dll"

;"DisableSTA"=dword:01

"Bind"=multi_sz:"PCI\\RTCENIC1","PCI\\E1Q51CE61"

[HKEY_LOCAL_MACHINE\Comm\MBridge\Linkage]

"Route"=multi_sz:"MBRIDGE1"

[HKEY_LOCAL_MACHINE\Comm\MBridge1]

"DisplayName"="Microsoft Mac Bridge Adapter"

"Group"="NDIS"

[HKEY_LOCAL_MACHINE\Comm\MBridge1\Parms]

"BusNumber"=dword:0

"BusType"=dword:0

[HKEY_LOCAL_MACHINE\Comm\MBridge1\Parms\TcpIp]

"EnableDHCP"=dword:1

"DefaultGateway"=""

"UseZeroBroadcast"=dword:0

"IpAddress"="0.0.0.0"

"Subnetmask"="0.0.0.0"

[HKEY_LOCAL_MACHINE\Comm\PCI\E1Q51CE61\Parms]

"ProtocolsToBindTo"=multi_sz:"MBRIDGE"

[HKEY_LOCAL_MACHINE\Comm\PCI\RTCENIC1\Parms]

"ProtocolsToBindTo"=multi_sz:"MBRIDGE"

Any ideas?

Please help me. Thanks in advance.

topic Wince 6: network bridging issue using intel 82574L in Embedded Connectivity

Wince 6: network bridging issue using intel 82574L