https://community.intel.com/t5/Embedded-Connectivity/I210-eepromARMTool-Check-Command-open-to-write-error/m-p/664648#M1663 <P>solved. I edit the source file. the path of pci device is wrong. </P> Fri, 27 Mar 2020 11:19:30 GMT bweip 2020-03-27T11:19:30Z https://community.intel.com/t5/Embedded-Connectivity/I210-eepromARMTool-Check-Command-open-to-write-error/m-p/664647#M1662 <P>I use I210 on Nvidia Xavier platform. I want to configure it.</P><P>There is an error: ​Check Command open to write error. </P><P> the resault:</P><CODE>nviida@ubuntu:~/eepromaccesstool-0-7-9$ sudo ./EepromAccessTool &nbsp; Intel(R) EEPROM Access Tool NVM/OTP Programming Example Tool Version 0.7.9 Provided under the terms of a CNDA. Do Not Distribute. Copyright(C) 2017-2019 by Intel(R) Corporation NIC BUS DEV FUN Silicon Memory Type Present === === === === ===== ====================== Check Command open to write error 1 1 0 0 I210 INVM+FLASH nvidia@ubuntu:~/eepromaccesstool-0-7-9$ sudo ./EepromAccessTool -dump -NIC=1 &nbsp; Intel(R) EEPROM Access Tool NVM/OTP Programming Example Tool Version 0.7.9 Provided under the terms of a CNDA. Do Not Distribute. Copyright(C) 2017-2019 by Intel(R) Corporation Check Command open to write error Found an NVM</CODE><P>​</P><P>​</P> Fri, 27 Mar 2020 09:20:57 GMT https://community.intel.com/t5/Embedded-Connectivity/I210-eepromARMTool-Check-Command-open-to-write-error/m-p/664647#M1662 bweip 2020-03-27T09:20:57Z https://community.intel.com/t5/Embedded-Connectivity/I210-eepromARMTool-Check-Command-open-to-write-error/m-p/664648#M1663 <P>solved. I edit the source file. the path of pci device is wrong. </P> Fri, 27 Mar 2020 11:19:30 GMT https://community.intel.com/t5/Embedded-Connectivity/I210-eepromARMTool-Check-Command-open-to-write-error/m-p/664648#M1663 bweip 2020-03-27T11:19:30Z