topic Re: I210 connect to switch in Embedded Connectivity

I210 connect to switch

bweip — Mon, 30 Mar 2020 14:55:06 GMT

I use the I210 on nvidia xavier platform and I connect I210 to switch chip(KSZ9477), and the KSZ9477 has its on driver for linux. Does it have an effect on I210? like the boot sequence?

Re: I210 connect to switch

CarlosAM_INTEL — Tue, 31 Mar 2020 05:31:28 GMT

Hello, @bweip:

Thank you for contacting Intel Embedded Community.

Based on your previous message, could you please clarify if the Intel® Ethernet Controller I210 is used on a third-party implementation or in a design developed by you?

Could you please clarify if this forum is related to the ones stated on the following websites?

https://forums.intel.com/s/question/0D50P00004ddmnESAQ/which-image-should-i-choose-for-eepromarmtool

https://forums.intel.com/s/question/0D50P00004ddpQhSAI/eepromarmtool-only-can-flash-i210-for-one-time-than-it-always-faild-

We are waiting for your answer to these questions.

Best regards,

@Mæcenas_INTEL.

Re: I210 connect to switch

bweip — Tue, 31 Mar 2020 08:47:17 GMT

yes, it is three problems we met on our own board: choose image, flash image, driver.

Re: I210 connect to switch

CarlosAM_INTEL — Tue, 31 Mar 2020 20:54:37 GMT

Hello, @bweip:

Thanks for your reply.

We suggest that your schematics and layout implementation should be verified by Intel following the procedures stated on the following website:

https://edc.intel.com/Tools/Design-Review/Default.aspx

Best regards,

@Mæcenas_INTEL.