topic I225V network card problem in Embedded Connectivity

I225V network card problem

ou — Tue, 07 Mar 2023 07:33:51 GMT

Hi，

we have developed a custom board using the i225-IT Ethernet controller.

We encountered the following problems:
1. In the process of using I225V, only 500M network bandwidth is accepted;
2. Receive and send simultaneously, with network bandwidth of 800M;
3. When sending only, it is 1000M;

Re: I225V network card problem

CarlosAM_INTEL — Tue, 07 Mar 2023 13:43:28 GMT

Hello, @ou:

Thank you for contacting Intel Embedded Community.

We need to address the following questions to understand your consultation:

Could you please clarify if your question is related to the Intel® Ethernet Controller I225-IT or the Intel® Ethernet Controller I225-V?

What is the list of documents that you used to develop your custom board using the Intel® Ethernet Controller?

We are waiting for your answer.

Best regards,

@CarlosAM_INTEL.

Re: I225V network card problem

ou — Wed, 15 Mar 2023 04:43:46 GMT

使用的KIT-I225-IT，也使用过KIT-I225-V，这两个BGA是一样的。都存在接收带宽500M现象。

Re: I225V network card problem

CarlosAM_INTEL — Wed, 15 Mar 2023 13:39:58 GMT

Hello, @ou:

Thanks for your reply.

We only provided support in the English language.

It seems that you do not understand our second question, please let us paraphrase it.

What are the documents that you are using to design your custom board with the Intel® Ethernet Controllers I225-IT and I225-V? By the way, what is the procedure that you have followed to obtain these documents?

Also, is this forum related to the following created by you?

https://community.intel.com/t5/Embedded-Connectivity/Flash-I225-firmware/m-p/1465901#M4366

We are waiting for your answer.

@CarlosAM_INTEL.