topic Re: Reset adapter unexpectedly in Ethernet Products

topic Re: Reset adapter unexpectedly in Ethernet Products https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532402#M10888 <P>Hi Mrbrklyn,</P><P> </P><P> </P>Thank you for the reply. The "PC vendor" I refer to is the board manufacturer where this 82576LM ethernet controller is embedded on. Since the chipset is integrated on the board, you may contact them check on the hardware aspect since the you mentioned the ethernet controller kept on reset.<P> </P><P> </P> Where did you obtain the driver? Have you tried using the driver from our website at<P> </P> <A href="https://downloadcenter.intel.com/download/15817/Intel-Network-Adapter-Driver-for-PCIe-Intel-Gigabit-Ethernet-Network-Connections-Under-Linux-?product=47549">https://downloadcenter.intel.com/download/15817/Intel-Network-Adapter-Driver-for-PCIe-Intel-Gigabit-Ethernet-Network-Connections-Under-Linux-?product=47549</A><P> </P><P> </P> Looking forward to your reply,.<P> </P><P> </P>Thanks,<P> </P>Sharon<P> </P> Thu, 07 Dec 2017 06:25:59 GMT idata 2017-12-07T06:25:59Z Reset adapter unexpectedly https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532399#M10885 <P>I have a system I use as a gateway:</P><P> Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (Lewisville) (rev 04)</P><P></P><P>It is a component of a fit/PC Intense running Linux is the 4.9.67-1-lts # 1 SMP kernel from Arch Linux. This problem has been going on for several kernels now over the last month.</P><P></P><P><A href="http://www.fit-pc.com/web/products/specifications/intense-pc-models/?model[]=IPC-C1047-WB-FM4U&model[]=IPC-C3517V-WB-FM4U">http://www.fit-pc.com/web/products/specifications/intense-pc-models/?model[]=IPC-C1047-WB-FM4U&model[]=IPC-C3517V-WB-FM4U</A> Intense PC models specifications </P><P></P><P>It has been having trouble reseting and possibly check summing. I use a ssh proxy tunnel which has always remained open and stable to <A href="http://panix.com">panix.com</A>. Now it dies</P><P></P><P>debug1: Connection to port 9000 forwarding to 127.0.0.1 port 8008 requested.</P><P>debug1: channel 3: new [direct-tcpip]</P><P>debug1: Connection to port 9000 forwarding to 127.0.0.1 port 8008 requested.</P><P>debug1: channel 44: new [direct-tcpip]</P><P>debug1: Connection to port 9000 forwarding to 127.0.0.1 port 8008 requested.</P><P>debug1: channel 45: new [direct-tcpip]</P><P>debug1: Connection to port 9000 forwarding to 127.0.0.1 port 8008 requested.</P><P>debug1: channel 46: new [direct-tcpip]</P><P>debug1: Connection to port 9000 forwarding to 127.0.0.1 port 8008 requested.</P><P>debug1: channel 47: new [direct-tcpip]</P><P>debug1: Connection to port 9000 forwarding to 127.0.0.1 port 8008 requested.</P><P>debug1: channel 48: new [direct-tcpip]</P><P>ssh_dispatch_run_fatal: Connection to 166.84.1.2 port 22: message authentication code incorrect</P><P>[ruben@flatbush ~]$ </P><P></P><P>from dmesg:</P><P>[38972.211043] ffff88041f798da0: f4 6e af f6 83 02 1d 62 8c 12 0f 1a e9 99 89 cf .n.....b........</P><P>[38972.211044] ffff88041f798db0: d3 b9 fc d0 d4 7a dc 96 d0 b0 f9 c3 bb fe c7 ea .....z..........</P><P>[38972.211046] ffff88041f798dc0: 39 51 ea 2c 6d 80 64 43 59 da 15 91 3a 6c 40 05 9Q.,m.dCY...:l@.</P><P>[38972.211047] ffff88041f798dd0: a6 50 40 98 d0 bb cf f3 c7 1f e2 41 bd ec 19 05 .P@........A....</P><P>[38972.211049] ffff88041f798de0: ab 51 d0 9a 46 90 9b db 3b b2 fd c1 c9 c0 ef 7b .Q..F...;......{</P><P>[38972.211051] ffff88041f798df0: 2a 45 2b f6 fb 42 96 56 af 45 89 23 99 51 4e ef *E+..B.V.E.# .QN.</P><P>[38972.211053] ffff88041f798e00: fd 6c 9a df 51 66 db 3e ca d9 4c f2 ad cb 89 7a .l..Qf.>..L....z</P><P>[38972.211054] ffff88041f798e10: c4 10 47 21 fc a5 4d f3 06 79 1f 8a ba d1 45 53 ..G!..M..y....ES</P><P>[38972.211056] ffff88041f798e20: bb 68 0b 8a ab 63 ae b2 1c 38 b0 35 6f 37 66 ec .h...c...8.5o7f.</P><P>[38972.211057] ffff88041f798e30: 02 4a .J</P><P>[38972.211062] e1000e 0000:00:19.0 eth1: Reset adapter unexpectedly</P><P>[38978.157727] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx</P><P>[39014.162430] elogind[1369]: New session c4 of user ruben.</P><P>[39089.012361] lp: driver loaded but no devices found</P><P>[39089.040701] st: Version 20160209, fixed bufsize 32768, s/g segs 256</P><P></P><P></P><P>It has been suggested that I can monkey with the module settings, but I'm not certain what to try or to procede with. Guessing blindly is usually not useful</P><P></P><P></P><P>modinfo give me this:</P><P></P>alias: pci:v00008086d0000105Esv*sd*bc*sc*i*depends: ptpintree: Yvermagic: 4.9.67-1-lts SMP mod_unload modversions parm: debug:Debug level (0=none,...,16=all) (int)parm: copybreak:Maximum size of packet that is copied to a new buffer on receive (uint)parm: TxIntDelay:Transmit Interrupt Delay (array of int)parm: TxAbsIntDelay:Transmit Absolute Interrupt Delay (array of int)parm: RxIntDelay:Receive Interrupt Delay (array of int)parm: RxAbsIntDelay:Receive Absolute Interrupt Delay (array of int)parm: InterruptThrottleRate:Interrupt Throttling Rate (array of int)parm: IntMode:Interrupt Mode (array of int)parm: SmartPowerDownEnable:Enable PHY smart power down (array of int)parm: KumeranLockLoss:Enable Kumeran lock loss workaround (array of int)parm: WriteProtectNVM:Write-protect NVM [WARNING: disabling this can lead to corrupted NVM] (array of int)parm: CrcStripping:Enable CRC Stripping, disable if your BMC needs the CRC (array of int) Wed, 06 Dec 2017 15:10:11 GMT https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532399#M10885 RSafi2 2017-12-06T15:10:11Z Re: Reset adapter unexpectedly https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532400#M10886 <P>Hi Mrbrklyn,</P><P> </P><P> </P> Thank yo for writing to Wired Communities. As this is an onboard NIC on the Intense PC, have you contacting the PC vendor to check on the onboard NIC which is part of their system? Are you using the driver version from the PC vendor? Please feel free to update me. <P> </P><P> </P>Thanks,<P> </P>Sharon<P> </P><P> </P><P> </P><P> </P><P> </P> Thu, 07 Dec 2017 03:12:27 GMT https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532400#M10886 idata 2017-12-07T03:12:27Z Re: Reset adapter unexpectedly https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532401#M10887 <P>Hello Sharon</P><P></P><P>yes I contacted them and there is nothing they can do, and I am not sure what you mean. This is a linux system. I'm not sure what you mean by a "pc vendor". All they know is that it has been burned in and that it has been tested with the linuxx kernel on a variety of distributions. The Kernel module that drives it is e1000e, and it is written, to my knowledge, by intel. It has a variety of options which can be tinkered with, for which I am only lightly familiar.</P><P></P><P> </P>Ruben Thu, 07 Dec 2017 03:21:54 GMT https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532401#M10887 RSafi2 2017-12-07T03:21:54Z Re: Reset adapter unexpectedly https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532402#M10888 <P>Hi Mrbrklyn,</P><P> </P><P> </P>Thank you for the reply. The "PC vendor" I refer to is the board manufacturer where this 82576LM ethernet controller is embedded on. Since the chipset is integrated on the board, you may contact them check on the hardware aspect since the you mentioned the ethernet controller kept on reset.<P> </P><P> </P> Where did you obtain the driver? Have you tried using the driver from our website at<P> </P> <A href="https://downloadcenter.intel.com/download/15817/Intel-Network-Adapter-Driver-for-PCIe-Intel-Gigabit-Ethernet-Network-Connections-Under-Linux-?product=47549">https://downloadcenter.intel.com/download/15817/Intel-Network-Adapter-Driver-for-PCIe-Intel-Gigabit-Ethernet-Network-Connections-Under-Linux-?product=47549</A><P> </P><P> </P> Looking forward to your reply,.<P> </P><P> </P>Thanks,<P> </P>Sharon<P> </P> Thu, 07 Dec 2017 06:25:59 GMT https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532402#M10888 idata 2017-12-07T06:25:59Z Re: Reset adapter unexpectedly https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532403#M10889 <P>Hello</P><P></P><P>The vendor said there is nothing they can do, it is an intel issue.</P><P></P><P>The software came from <A href="http://www.kernel.org">www.kernel.org</A>, like all over linux drivers. Can you help me work with the module options? Intel, who wrote these drivers, is the best choice to get help.</P> Sat, 09 Dec 2017 20:03:58 GMT https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532403#M10889 RSafi2 2017-12-09T20:03:58Z Re: Reset adapter unexpectedly https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532404#M10890 filename: /lib/modules/4.9.67-1-lts/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko.gzversion: 3.2.6-klicense: GPLdescription:Intel(R) PRO/1000 Network Driverauthor: Intel Corporation, <</span>mailto:<A href="mailto:linux.nics@intel.com">linux.nics@intel.com</A> <A href="mailto:linux.nics@intel.com">linux.nics@intel.com</A>> Sat, 09 Dec 2017 20:05:56 GMT https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532404#M10890 RSafi2 2017-12-09T20:05:56Z Re: Reset adapter unexpectedly https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532405#M10891 <P>Hi Mrbrklyn,</P><P> </P><P> </P> Thank you for the additional information. What you can do is to request from Sourceforge<P> </P>by clicking on Ticket-Feature Request via the website below (this is the site where Linux driver is available)<P> </P> <A href="https://sourceforge.net/p/e1000/feature-requests/?source=navbar">https://sourceforge.net/p/e1000/feature-requests/?source=navbar</A><P> </P><P> </P>Thanks,<P> </P>Sharon<P> </P> Mon, 11 Dec 2017 04:00:42 GMT https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532405#M10891 idata 2017-12-11T04:00:42Z Re: Reset adapter unexpectedly https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532406#M10892 <P>Hello Sharon</P><P></P><P>I already have the most latest version. I installed it off of arches community archives last night and the problem just continues. If anything it has gotten work.</P><P></P><P></P><P></P><P>[356760.653370] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:</P><P>[356762.652817] e1000e 0000:00:19.0 eth1: Reset adapter unexpectedly</P><P>[356766.409364] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx</P><P>[357338.693255] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:</P><P>[357340.693435] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:</P><P>[357342.692630] e1000e 0000:00:19.0 eth1: Reset adapter unexpectedly</P><P>[357346.438995] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx</P><P>[364073.158078] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:</P><P>[364075.158204] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:</P><P>[364077.157660] e1000e 0000:00:19.0 eth1: Reset adapter unexpectedly</P><P>[364080.934026] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx</P><P>[364129.161977] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:</P><P>[364131.162089] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:</P><P>[364132.121449] e1000e 0000:00:19.0 eth1: Reset adapter unexpectedly</P><P>[364135.867908] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx</P><P>[364784.167554] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:</P><P>[364786.167712] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:</P><P>[364787.207064] e1000e 0000:00:19.0 eth1: Reset adapter unexpectedly</P><P>[364790.993461] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx</P><P>[366043.294974] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:</P><P>[366045.295159] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:</P><P>[366047.295262] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:</P><P>[366049.295403] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:</P><P>[366051.294626] e1000e 0000:00:19.0 eth1: Reset adapter unexpectedly</P><P>[366055.071031] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx</P><P>[366091.298158] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:</P><P>[366093.298308] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:</P><P>[366095.297662] e1000e 0000:00:19.0 eth1: Reset adapter unexpectedly</P><P>[366099.044025] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx</P><P>[366161.302952] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:</P><P>[366163.303114] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:</P><P>[366164.262397] e1000e 0000:00:19.0 eth1: Reset adapter unexpectedly</P><P>[366167.988803] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx</P><P>[367240.337699] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:</P><P>[367242.337834] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:</P><P>[367244.337340] e1000e 0000:00:19.0 eth1: Reset adapter unexpectedly</P><P>[367248.123573] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx</P><P>[367616.363905] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:</P><P>[367618.364061] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:</P><P>[367620.363221] e1000e 0000:00:19.0 eth1: Reset adapter unexpectedly</P><P>[367624.129487] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:</P><P></P><P></P><P>[www3 ~]# modinfo e1000e</P><P>filename: /lib/modules/4.9.67-1-lts/updates/e1000e.ko</P><P>version: 3.3.6-NAPI</P><P>license: GPL</P><P>description: Intel(R) PRO/1000 Network Driver</P><P>author: Intel Corporation, <</span>mailto:<A href="mailto:linux.nics@intel.com">linux.nics@intel.com</A> <A href="mailto:linux.nics@intel.com">linux.nics@intel.com</A>></P><P>srcversion: 6453212B70344504D53DE09</P><P></P><P></P><P>There are OPTIONS that I can use on the module. That is where I need adivice. Are you an employee of Intel or an AI?</P><P></P><P>Ruben</P> Mon, 11 Dec 2017 05:00:38 GMT https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532406#M10892 RSafi2 2017-12-11T05:00:38Z Re: Reset adapter unexpectedly https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532407#M10893 <P>Hi Mrbrklyn,</P><P> </P><P> </P> Thank you for the reply. I refer you to contact sourceforge since that is the platform where the Linux driver for the NIC is available and you can request from there for the modification and support. I will also try further check for you.<P> </P><P> </P>Regards,<P> </P>Sharon<P> </P> Mon, 11 Dec 2017 08:58:15 GMT https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532407#M10893 idata 2017-12-11T08:58:15Z Re: Reset adapter unexpectedly https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532408#M10894 <P>I sent a ticket there, but they are not responding. I need to know what all the options for the module does. I am still losing cryptographic checks and seeing resets.</P> Thu, 14 Dec 2017 06:15:05 GMT https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532408#M10894 RSafi2 2017-12-14T06:15:05Z Re: Reset adapter unexpectedly https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532409#M10895 <P>Hi Mrbrklyn,</P><P> </P><P> </P> Thank you for the update and apologize for any inconvenience this might have caused. Let me further check.<P> </P><P> </P>Regards,<P> </P>Sharon<P> </P> Fri, 15 Dec 2017 04:25:20 GMT https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532409#M10895 idata 2017-12-15T04:25:20Z Re: Reset adapter unexpectedly https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532410#M10896 <P></P><P> </P>Hi Mrbrklyn,<P> </P><P> </P> Please try updating the driver version 3.4.0.2 posted at link below. <P> </P> <A href="https://sourceforge.net/projects/e1000/files/e1000e%20stable/3.4.0.2/">https://sourceforge.net/projects/e1000/files/e1000e%20stable/3.4.0.2/</A> <A href="https://sourceforge.net/projects/e1000/files/e1000e%20stable/3.4.0.2/">https://sourceforge.net/projects/e1000/files/e1000e%20stable/3.4.0.2/</A><P> </P><P> </P> Feel free to update me. Thank you.<P> </P><P> </P>Regards,<P> </P>Sharon Mon, 18 Dec 2017 09:18:15 GMT https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532410#M10896 idata 2017-12-18T09:18:15Z Re: Reset adapter unexpectedly https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532411#M10897 <P>Hi Mrbrklyn,</P><P></P><P> Please feel free to update me if you have updated to driver version 3.4.0.2, looking forward to your reply. Thank you.</P><P></P><P>Regards,</P><P> </P>Sharon T<P> </P> Wed, 03 Jan 2018 03:40:41 GMT https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532411#M10897 idata 2018-01-03T03:40:41Z Re: Reset adapter unexpectedly https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532412#M10898 <P>I compiled and ran that a couple of weeks ago and there has been no change. I created a ticket on their system but there has been no response.</P><P></P><P>I don't know why it is so hard to discuss the built in options of the module and how I can manipulate them successfully in an attempt to overcome this problem.</P><P></P><P>We discuss everything but what I asked. I seriously doubt they will ever debug this or fix it.</P> Wed, 03 Jan 2018 06:49:47 GMT https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532412#M10898 RSafi2 2018-01-03T06:49:47Z Re: Reset adapter unexpectedly https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532413#M10899 <P> why is it pointing me to ixgbe-5.3.5.tar.gz?</P><P></P><P></P><P></P><UL><LI> <A href="https://sourceforge.net/projects/e1000/?source=navbar">https://sourceforge.net/projects/e1000/?source=navbar</A> Summary </LI><LI> <A href="https://sourceforge.net/projects/e1000/files/?source=navbar">https://sourceforge.net/projects/e1000/files/?source=navbar</A> Files </LI><LI> <A href="https://sourceforge.net/projects/e1000/reviews?source=navbar">https://sourceforge.net/projects/e1000/reviews?source=navbar</A> Reviews </LI><LI> <A href="https://sourceforge.net/projects/e1000/support?source=navbar">https://sourceforge.net/projects/e1000/support?source=navbar</A> Support </LI><LI> <A href="https://sourceforge.net/p/e1000/wiki/?source=navbar">https://sourceforge.net/p/e1000/wiki/?source=navbar</A> Wiki </LI><LI> <A href="https://sourceforge.net/p/e1000/mailman/?source=navbar">https://sourceforge.net/p/e1000/mailman/?source=navbar</A> Mailing Lists </LI><LI> <A href="https://sourceforge.net/p/e1000/_list/tickets?source=navbar">https://sourceforge.net/p/e1000/_list/tickets?source=navbar</A> Tickets ▾ <UL><LI> </LI><LI> </LI><LI> </LI></UL></LI></UL><P></P><P> </P><P> </P><P>Looking for the latest version? <B> <A href="https://sourceforge.net/projects/e1000/files/latest/download?source=files">https://sourceforge.net/projects/e1000/files/latest/download?source=files</A> Download ixgbe-5.3.5.tar.gz (463.1 kB) </B> </P><P> <A href="https://sourceforge.net/projects/e1000/files/">https://sourceforge.net/projects/e1000/files/</A> Home / <A href="https://sourceforge.net/projects/e1000/files/e1000e%20stable/">https://sourceforge.net/projects/e1000/files/e1000e%20stable/</A> e1000e stable / 3.4.0.2 </P><P> </P>NameModifiedSizeDownloads / WeekStatus<A href="https://sourceforge.net/projects/e1000/files/e1000e%20stable/">https://sourceforge.net/projects/e1000/files/e1000e%20stable/</A> Parent folder <A href="https://sourceforge.net/projects/e1000/files/e1000e%20stable/3.4.0.2/e1000e-3.4.0.2.tar.gz/download">https://sourceforge.net/projects/e1000/files/e1000e%20stable/3.4.0.2/e1000e-3.4.0.2.tar.gz/download</A> e1000e-3.4.0.2.tar.gz2017-12-13299.6 kB 91<A href="https://sourceforge.net/projects/e1000/files/e1000e%20stable/3.4.0.2/e1000e-3.4.0.2.tar.gz/stats/timeline">https://sourceforge.net/projects/e1000/files/e1000e%20stable/3.4.0.2/e1000e-3.4.0.2.tar.gz/stats/timeline</A> i <A href="https://sourceforge.net/projects/e1000/files/e1000e%20stable/3.4.0.2/Readme.txt/download">https://sourceforge.net/projects/e1000/files/e1000e%20stable/3.4.0.2/Readme.txt/download</A> Readme.txt2017-12-13268 Bytes 13<A href="https://sourceforge.net/projects/e1000/files/e1000e%20stable/3.4.0.2/Readme.txt/stats/timeline">https://sourceforge.net/projects/e1000/files/e1000e%20stable/3.4.0.2/Readme.txt/stats/timeline</A> i Wed, 03 Jan 2018 06:58:45 GMT https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532413#M10899 RSafi2 2018-01-03T06:58:45Z Re: Reset adapter unexpectedly https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532414#M10900 <P>Hi MrBrklyn,</P><P> </P><P> </P> The link gives you the download link to e1000e-3.4.0.2.tar.gz which is the driver version you can download. The ixgbe 5.3.5.tar.gz is the latest version post there for 10 Gigabit network adapter. Hope this clarifies.<P> </P><P> </P>Thanks,<P> </P>Sharon<P> </P> Wed, 03 Jan 2018 08:07:51 GMT https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532414#M10900 idata 2018-01-03T08:07:51Z Re: Reset adapter unexpectedly https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532415#M10901 <P>Hi MrBrklyn,</P><P></P><P> Can you clarify when you said the adapter is resetting, how does it reset?</P><P></P><P> I understand you already talked to Intense PC vendor where this NIC is embedded, please double check with them for any driver or BIOS that you should be using for the board and the onboard NIC. Please refer to this website about OEM support:</P><P></P><P><A href="https://www.intel.com/content/www/us/en/support/articles/000005658/network-and-i-o/ethernet-products.html">https://www.intel.com/content/www/us/en/support/articles/000005658/network-and-i-o/ethernet-products.html</A> Support for the Intel® 82579 Gigabit Ethernet Controller </P><P></P><P>Regards,</P><P> </P>Sharon T Fri, 05 Jan 2018 06:51:48 GMT https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532415#M10901 idata 2018-01-05T06:51:48Z Re: Reset adapter unexpectedly https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532416#M10902 <P>Hi MrBrklyn,</P><P> </P><P> </P> Please feel free to update me if further assistance needed.<P> </P><P> </P>Regards,<P> </P>Sharon T Thu, 11 Jan 2018 03:33:35 GMT https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532416#M10902 idata 2018-01-11T03:33:35Z Re: Reset adapter unexpectedly https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532417#M10903 <P>This problem seems to continue AND I've read about it continually on the internet, others looking for an answer to this. I wish this old bug would be fixed</P><P> </P><P>[308084.322766] e1000e 0000:00:19.0 eth1: Detected Hardware Unit Hang:</P><P>         TDH         <24></P><P>         TDT         <3f></P><P>         next_to_use     <3f></P><P>         next_to_clean    <22></P><P>        buffer_info[next_to_clean]:</P><P>         time_stamp      <101d59c8b></P><P>         next_to_watch    <24></P><P>         jiffies       <101d59d20></P><P>         next_to_watch.status <0></P><P>        MAC Status       <80083></P><P>        PHY Status       <796d></P><P>        PHY 1000BASE-T Status <3c00></P><P>        PHY Extended Status  <3000></P><P>        PCI Status       <10></P><P> </P> Sat, 10 Aug 2019 10:36:26 GMT https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532417#M10903 RSafi4 2019-08-10T10:36:26Z Re: Reset adapter unexpectedly https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532418#M10904 <P>[www3 updates]# uname -a</P><P>Linux www3 4.19.60-1-lts #1 SMP Sun Jul 21 21:32:00 UTC 2019 x86_64 GNU/Linux</P><P> </P> Sat, 10 Aug 2019 10:37:05 GMT https://community.intel.com/t5/Ethernet-Products/Reset-adapter-unexpectedly/m-p/532418#M10904 RSafi4 2019-08-10T10:37:05Z