topic Re: Problem in Nios console in Ethernet Products

Problem in Nios console

sRama28 — Tue, 05 May 2020 13:40:22 GMT

i have used simple socket server example design code and added QSPI IP on it.after adding the IP in qsys nios 2 console is not printing anything.help to resolve this /or i need to any other setting

Re: Problem in Nios console

AlfredoS_Intel — Fri, 08 May 2020 08:51:57 GMT

Hi sRama28,

Thank you for posting in our Intel® Ethernet Communities page.

To be able to assist you accurately, may we know the Intel® product that you are asking assistance with?

Looking forward to your reply. Should we not get your reply, we will check back with you after 3 business days.

Best Regards,

Alfred S

Intel® Customer Support

Re: Problem in Nios console

AlfredoS_Intel — Wed, 13 May 2020 11:35:15 GMT

Hi sRama28,

We have not heard from you yet, and we are reaching out to check if you need more time.

Should we not get your response, we will check back with you again after 3 business days.

If there is still no response, we may be forced to close the thread.

Best Regards,

Alfred S

Intel Customer Support

Re: Problem in Nios console

sRama28 — Wed, 13 May 2020 13:18:30 GMT

i m using MAX10 FPGA and Ethernet simple socket server sample code from intel website.

i added QSPI in qsys and compiles NIOS 2 simple socket server code the console is not printing when i run the ELF file in NIOS.

Re: Problem in Nios console

AlfredoS_Intel — Wed, 13 May 2020 14:37:45 GMT

Hi sRama28,

Thank you for your response,

We will be transferring your thread to our NIOS console forum.

Best Regards,

Alfred S

Intel Customer Support

Re: Problem in Nios console

SyafieqS — Thu, 14 May 2020 15:14:29 GMT

Hi Sathish,

Can you elaborate more about the project and what are expecting the output to be displayed in Nios console? Also what I understand Max 10 is not listed in the link below where have RJ-45 Ethernet cable.

https://www.intel.com/content/www/us/en/programmable/support/support-resources/design-examples/intellectual-property/embedded/nios-ii/exm-hello_world.html

Thanks,

Regards

Re: Problem in Nios console

sRama28 — Mon, 25 May 2020 11:22:24 GMT

i am having working Simple socket server code with evaluation board.

normal sof and ELF file running correctly.but if i tried with QSPI the NIOS is not booting and the console not printing anything..

please say any idea to boot NIOS processor.

Re: Problem in Nios console

SyafieqS — Fri, 29 May 2020 10:36:52 GMT

Hi Sathish,

You can take look at below link for reference for Nios II Configuration and Booting Solutions

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/nios2/edh_ed_handbook.pdf (p218)

Thanks,

Regards