topic Re: Schematic for RealSense interposer? in Items with no label

Schematic for RealSense interposer?

rtsen3 — Fri, 08 Jul 2016 00:29:17 GMT

When you remove the case of the R200 you find a small metal enclosure holding the cameras. Nine conductors connect the cameras to an interposer board that expands the connection to a Micro USB 3 B socket. I would like the schematic and BOM of the interposer including the name of the connector and socket. If no one can provide a schematic and BOM, I would also appreciate the name of the pictured connector and socket. Thanks for any help!

Re: Schematic for RealSense interposer?

ABulz — Fri, 08 Jul 2016 19:19:36 GMT

Hi rtsengMIT,

The cable and connector are 10-pin LVDS like the ones from I-PEX. I would appreciate the schematic too, particularly for the SR300. The R200 and SR300 have different interposers.

Good luck!

Adrian

Re: Schematic for RealSense interposer?

rtsen3 — Fri, 08 Jul 2016 20:12:49 GMT

Thanks! Can you send me a link to the part? I couldn't find it on the I-PEX website.

We may reverse engineer the schematic - it's not very complex. Hopefully someone responds, but if not I'll send it to you if we do it... Thanks!

/Ryan

Re: Schematic for RealSense interposer?

ABulz — Sat, 09 Jul 2016 21:17:58 GMT

I'm fairly sure it's 20347-310E-12R for the smt cable receptacle, but someone should double check. This is the source page: https://www.i-pex.com/Products/detail/83# ! https://www.i-pex.com/Products/detail/83# !

Re: Schematic for RealSense interposer?

idata — Mon, 11 Jul 2016 17:30:04 GMT

Hi RtsengMIT,

Thanks, Bulzacki for the help on this; at this point I would recommend you to post on our Intel® RealSense™ Technology Forum, to get further assistance.

Intel® Developer Zone Forum, Intel® RealSense™ Technology

https://software.intel.com/en-us/forums/realsense https://software.intel.com/en-us/forums/realsense

Regards,

Hellen.