Getting started with using the SDK

MAbdo2 — Fri, 25 May 2018 16:23:02 GMT

The following questions concern the D435 Device.

a) if the pixel value in the depth-map is (say) 4871, it means that the point represented by that pixel is 4871 millimeters (or 4.871 meters) away from the

RealSense device. Right?

b) With my application, the color (or greyscale) data is of little importance/use; I just want to get the depth-map. Is there a way to configure the stream so that it only outputs the depth-map data ONLY to get the fastest rate/bandwidth? If so, please point me to the relevant API

Thanks

Re: Getting started with using the SDK

idata — Tue, 29 May 2018 22:04:53 GMT

Hello MoA,

Yes, you are right about the distance in the depth map.

Here is an API that would be useful for you:

https://github.com/IntelRealSense/librealsense/blob/master/examples/C/depth/rs-depth.c

Best Regards,

Juan N.

topic Getting started with using the SDK in Items with no label

Getting started with using the SDK

Re: Getting started with using the SDK