topic Re:Power Tab is Missing in IGCC for Panel Self Refresh in Graphics

Power Tab is Missing in IGCC for Panel Self Refresh

memolio — Wed, 27 Jul 2022 20:03:37 GMT

Core i5 12600K

Motherboard ASUS PRIME Z690-P WIFI D4

Ram DDR4 3600

I had a GTX6660 Ti that Stop Working last week

After Using Intel Graphic GPU My screen Start Shaking and stuttering , I Chenged RF to 60HZ interlaced screen stop shaking but now text is seems very bad with shaking

Changing to 60Hz P or lower RF or changing resolution make screen Shaking very bad

searched internet for solution ,they said to chang setting in Intel Graphic Commond Center in System - Power tab But mine Dosent Have Power Tab.

Unistalled Driver From Device Manager and Installing Driver Again Dosent Help

Unistalling IGCC and reinstallin it Dosent Help Even repairing or Reseting it from Win Setting.

Installing Drivers From My motherboard webSite Dosent Help

Installed A new Windows 10 and the problem continue

Changing HDMI cable Dosent Help

Changing Monitor Dosent Help and also they didnt have interlaced setting So only have bad screen Shaking

Reducing Resolution Dosent help and screen Start Shaking and just 1080 60HZ intelaced works

with text shaking and texts are not clear like before

Tried To Install Intel® Graphics Control Panel but Windows Store Dosent let me to intall

installed IGCC beta but dosent Help.

I unistalled itel GPU Driver and Set to Microsoft Basic and Disabled Updating Driver Update Automatic then Restart , Screen Was Good with Clear text without Shaking but Now All of the features has gone .

please Help ME.

Re:Power Tab is Missing in IGCC for Panel Self Refresh

Steven_Intel — Fri, 29 Jul 2022 15:58:58 GMT

Hello memolio,

Thank you for posting on the Intel® communities.

We are currently working on your issue. As soon as I have an update, I will let you know.

Best regards,

Steven G.

Intel Customer Support Technician.

Re:Power Tab is Missing in IGCC for Panel Self Refresh

Steven_Intel — Fri, 29 Jul 2022 16:28:26 GMT

Hello memolio,

Thank you for posting on the Intel® communities.

Please perform the following steps:

If possible, please check if the issue persists with another type of cable, like DisplayPort or Type-C.
Is the shaking happening on the BIOS screen?
Make sure Windows 10 is fully updated.
Perform a clean installation of the latest graphics drivers. You can follow the steps for a clean installation here https://www.intel.com/content/www/us/en/support/articles/000057389.html and download the latest graphics drivers here https://www.intel.com/content/www/us/en/download/19344/intel-graphics-windows-dch-drivers.html

As well, please be aware that the Power tab in the Intel® Graphics Command Center does not show in desktop systems, as the information there refers to power settings for laptops and mobile devices.

Best regards,

Steven G.

Intel Customer Support Technician.

Re: Power Tab is Missing in IGCC for Panel Self Refresh

memolio — Fri, 29 Jul 2022 19:11:10 GMT

Thank Steven G. (Steven_Intel) For Help

unfotunately My Monitor Only HAve HDMI , D-Sub, DVI-D

I Tried HDMI TO D-Sub Cable But Screen Still Shake

Bios Screen is great without any Problem.

I Updated My win 11 Fully and tried a Fully Updated Win 10 but nothing changed.

also I Have Tried Fully unistalling the Driver and Updating It To the Last One .

but now I see there is another Driver has Came So I will try this One tomorrow.

Is there Any Setting I can do from Registry To Disable Panel Self Refresh or enableing it to test if its work?

Re: Power Tab is Missing in IGCC for Panel Self Refresh

memolio — Sat, 30 Jul 2022 09:16:55 GMT

I Uninstalled Driver via Device manager ,turned off internet , restart and installed driver v31.0.101.3222.x64 that I have downloaded from intel website and just when when driver was installing my text turned uncleaer wih abit shaking. and refresh rate changed to 60Hz (interlaced)

changing to 60p or lower setting like 59.93Hz or 59.94Hz or 50Hz make screen shake with color problems.

I Test a wireless android Television with an app named spacedesk And is Was OK without Any Problem.

Is there Any Setting I can do from Registry To Disable Panel Self Refresh or enableing it to test if its work?

Re:Power Tab is Missing in IGCC for Panel Self Refresh

Steven_Intel — Tue, 02 Aug 2022 13:22:57 GMT

Thank you for your response.

I would like to work on this issue. In order to do so, please provide the following information:

Provide video/pictures of the screen while having the issue.
Download the Intel® SSU https://downloadcenter.intel.com/download/25293/Intel-System-Support-Utility-for-Windows-

Open the application and select "Everything", click on "Scan" to see the system and device information. By default, Intel® SSU will take you to the "Summary View". Click on the menu where it says "Summary" to change to "Detailed View". To save your scan, click on "Next", then "Save". Please attach the file to your reply.

Best regards,

Steven G.

Intel Customer Support Technician.

Re:Power Tab is Missing in IGCC for Panel Self Refresh

Steven_Intel — Fri, 05 Aug 2022 21:49:28 GMT

Were you able to check the previous post?

Let us know if you still need assistance.

Best regards,

Steven G.

Intel Customer Support Technician.

Re:Power Tab is Missing in IGCC for Panel Self Refresh

Steven_Intel — Wed, 10 Aug 2022 21:54:37 GMT

Since we have not heard back from you, we will close this thread. If you need any additional information, please submit a new question, as this thread will no longer be monitored.

Best regards,

Steven G.

Intel Customer Support Technician.