https://community.intel.com/t5/Graphics/Failed-RAID-1-Drive/m-p/206783#M1501 <P>I created a RAID 1 array with 2 identical Seagate Barracuda 21.5 TB drives and then one of the drives failed. This array is not the boot drive. I removed the failed drive and installed a replacement drive (same everything - manufacturer, model, size, etc.) using the same SATA port as the failed drive.</P><P></P><P>Matrix Storage Console shows:</P><P></P><P>Arrays</P><P> |-Array_0000</P><P> |__Volumes</P><P> |___RAID-1</P><P> |__RAID Hard Drives</P><P> |-Port 2:ST31550541AS</P><P> |-Missing Hard Drive</P><P>Non-RAID Hard Drives</P><P> |-Port 0: ST31500541AS</P><P></P><P>I want to rebuild the array with the existing good drive and hopefully keep all of the data that is on the drive.</P><P></P><P>I need help rebuilding the array.</P><P></P><P>Thanks in advance</P><P>Dan</P> Mon, 17 Jan 2011 02:56:22 GMT idata 2011-01-17T02:56:22Z https://community.intel.com/t5/Graphics/Failed-RAID-1-Drive/m-p/206783#M1501 <P>I created a RAID 1 array with 2 identical Seagate Barracuda 21.5 TB drives and then one of the drives failed. This array is not the boot drive. I removed the failed drive and installed a replacement drive (same everything - manufacturer, model, size, etc.) using the same SATA port as the failed drive.</P><P></P><P>Matrix Storage Console shows:</P><P></P><P>Arrays</P><P> |-Array_0000</P><P> |__Volumes</P><P> |___RAID-1</P><P> |__RAID Hard Drives</P><P> |-Port 2:ST31550541AS</P><P> |-Missing Hard Drive</P><P>Non-RAID Hard Drives</P><P> |-Port 0: ST31500541AS</P><P></P><P>I want to rebuild the array with the existing good drive and hopefully keep all of the data that is on the drive.</P><P></P><P>I need help rebuilding the array.</P><P></P><P>Thanks in advance</P><P>Dan</P> Mon, 17 Jan 2011 02:56:22 GMT https://community.intel.com/t5/Graphics/Failed-RAID-1-Drive/m-p/206783#M1501 idata 2011-01-17T02:56:22Z