topic Re: HD 4000 graphics - multiple displays in Graphics

HD 4000 graphics - multiple displays

PLigh1 — Wed, 11 Mar 2015 22:43:20 GMT

Hi,

I have a HDMI cable going from the card to the receiver and a VGA cable going to my HP20" VGA monitor.

I'd like to send 1080p to the receiver and VGA (1600 X 900) to the monitor.

Can I do this?

Thanks

Paul

Allan_J_Intel1 — Thu, 12 Mar 2015 16:41:23 GMT

According to the specifications of the graphics controller, HDMI and VGA could support up to 2560 x 1600.

If you are setting up extended desktop mode, you would be able to obtain 1080 on one monitor and the other 1600*900.

This is called screen panning, see here for more information: http://www.intel.com/support/graphics/sb/CS-031040.htm Graphics Drivers — Multiple Displays Frequently Asked Questions (FAQ)

Allan.

PLigh1 — Thu, 12 Mar 2015 19:16:52 GMT

Thanks Allan

I did think of that, but the monitor is in a different room to the TV. That would make it difficult.

Any other ideas?

Thanks

Paul

Allan_J_Intel1 — Fri, 13 Mar 2015 19:57:46 GMT

If you need to move the computer from one room to another, you could try setting up graphics profiles.

See here for more information: http://www.intel.com/support/graphics/sb/CS-034404.htm?wapkw=graphics+profiles Graphics Drivers — How To Use Intel Graphics Profiles

Allan.

PLigh1 — Fri, 13 Mar 2015 20:42:25 GMT

Allan

Thanks for trying to help. Please let me clarify.

1 X HTPC below TV connected to AVR via HDMI.

1 X VGA monitor in office (other room) connected to HTPC via 75ft VGA cable.

Thanks again.

Paul Light

Allan_J_Intel1 — Mon, 16 Mar 2015 17:05:58 GMT

I have read some third party document that for resolutions of 1600×1200 and above a 25ft or 7.5 m maximum cable can be used.

Allan.