https://community.intel.com/t5/Graphics/Intel-RAID-and-missing-drives/m-p/212368#M1962 <P>Booted up windows today and the BIOS had reset itself..so my Intel RAID was set to normal IDE. I went back to the BIOS and enabled RAID mode.</P><P>To my horrors when I was back in Windows 2 out of the 4 RAID disks shows up in the intel manager as non raid disks. So the RAID volume is failed</P><P></P><P>I was running storage matrix 8.9.. I tried downgreading to 8.8 and 8.7 in desperation.</P><P></P><P>Any suggestions in how to make the Intel software read the disks again ?</P><P></P><P>I also noticed that disk manager in windows was happy to see those 2 non raid disks and try to make volumes out of them. But I didn't initialize any of them.</P> Tue, 23 Mar 2010 19:26:36 GMT idata 2010-03-23T19:26:36Z https://community.intel.com/t5/Graphics/Intel-RAID-and-missing-drives/m-p/212368#M1962 <P>Booted up windows today and the BIOS had reset itself..so my Intel RAID was set to normal IDE. I went back to the BIOS and enabled RAID mode.</P><P>To my horrors when I was back in Windows 2 out of the 4 RAID disks shows up in the intel manager as non raid disks. So the RAID volume is failed</P><P></P><P>I was running storage matrix 8.9.. I tried downgreading to 8.8 and 8.7 in desperation.</P><P></P><P>Any suggestions in how to make the Intel software read the disks again ?</P><P></P><P>I also noticed that disk manager in windows was happy to see those 2 non raid disks and try to make volumes out of them. But I didn't initialize any of them.</P> Tue, 23 Mar 2010 19:26:36 GMT https://community.intel.com/t5/Graphics/Intel-RAID-and-missing-drives/m-p/212368#M1962 idata 2010-03-23T19:26:36Z