topic HD4000 Screen flicker after cold boot in Graphics

HD4000 Screen flicker after cold boot

EHoll — Wed, 12 Feb 2014 23:21:27 GMT

Greetings everyone!

My system configuration is as follows:

core i5-3570k, using hd400 igp

intel dh77kc motherboard

kingston 4GB DDR3 RAM Module (1 stick)

Win7 32 bit

Graphic Driver: Intel Version 8.15.10.2639

Monitor: LG, Resolution 1900x1200, DVI Cable

A few days ago I switched to the new motherboard above and refreshed the whole software installation.

From now on, when the system is booted from cold, there is a reproducible screen flickering for the first 5 Minutes after boot.

The screen flickers every 2-5 seconds and gets black for a second.

My previous board (Gigabyte z77ds3h) didn't have that issue.

Rebooting a "warm" system does not show that issue.

I've read in another thread here, that a similar problem was solved by switching to another driver version. As far as I know, I'm already using the newest driver.

Can anybody help?

Re: HD4000 Screen flicker after cold boot

Kevin_M_Intel — Thu, 13 Feb 2014 15:33:57 GMT

Hi mrAtari,

I am sorry to hear you are having problems but let me help you.

Based on the information you provided, there are some steps I want you to do:

1. Uninstall the current graphics driver. Here you have the instructions:

http://www.intel.com/support/graphics/sb/CS-034574.htm http://www.intel.com/support/graphics/sb/CS-034574.htm

2. Download and install the latest graphics driver for your system. Here is the download link:

https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23406 https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23406

Re: HD4000 Screen flicker after cold boot

EHoll — Fri, 14 Feb 2014 08:37:03 GMT

Hi Kevin,

I did as you told. The new driver version is now 10.18.10.3345.

Screen is still flickering on boot.

Re: HD4000 Screen flicker after cold boot

Kevin_M_Intel — Wed, 19 Feb 2014 17:25:29 GMT

Hi mrAtari,

I am sorry to hear you are still having problems. Please try clearing the CMOS in the board by disconnecting all components from the board and remove the battery for about 20-30 minutes.

Besides this, I recommend you updating the bios in your system. Here is the download link:

https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22815 https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22815

Here are some other steps you can try:

Test a different power supply if possible.
In the case you are using any video adapter/convertor try using direct connection.
Test another cable if possible or a different connection.