https://community.intel.com/t5/Graphics/Intel-HD-Graphics-No-HDMI-Monitor-Detected/m-p/408593#M33403 <P>I recently purchased a new monitor to use as my laptop screen. The display works through the HDMI port when the Intel HD Graphics are uninstalled, but only at 800x600, 1024x768 and 1280x720.</P><P></P><P>However when the Intel HD Graphics drivers for my i5-430M (Running on Windows 7) are installed the monitor cuts off after the 'Windows is Starting screen' and only the internal laptop monitor is detected.</P><P></P><P>The Intel Graphics and Media Control Panel only gives options for Single Display and under Monitor/TV Settings it says Monitor/TV Settings are not supported. Any idea on how I can get both the eternal display and Intel HD Graphics working?</P> Sat, 31 Dec 2011 20:55:30 GMT idata 2011-12-31T20:55:30Z https://community.intel.com/t5/Graphics/Intel-HD-Graphics-No-HDMI-Monitor-Detected/m-p/408593#M33403 <P>I recently purchased a new monitor to use as my laptop screen. The display works through the HDMI port when the Intel HD Graphics are uninstalled, but only at 800x600, 1024x768 and 1280x720.</P><P></P><P>However when the Intel HD Graphics drivers for my i5-430M (Running on Windows 7) are installed the monitor cuts off after the 'Windows is Starting screen' and only the internal laptop monitor is detected.</P><P></P><P>The Intel Graphics and Media Control Panel only gives options for Single Display and under Monitor/TV Settings it says Monitor/TV Settings are not supported. Any idea on how I can get both the eternal display and Intel HD Graphics working?</P> Sat, 31 Dec 2011 20:55:30 GMT https://community.intel.com/t5/Graphics/Intel-HD-Graphics-No-HDMI-Monitor-Detected/m-p/408593#M33403 idata 2011-12-31T20:55:30Z https://community.intel.com/t5/Graphics/Intel-HD-Graphics-No-HDMI-Monitor-Detected/m-p/408594#M33404 <P>I got exactly the same Problem with INTEL Core i5-2557M ULV. With Standard Windows driver all works fine, exept the bad resolutions. I'm using Windows 7 Home Premuim. </P><P></P><P>If I install the Intel HD3000 drivers(tested many), the screen is black after the "Windows is starting screen" which is displayed fine.</P><P></P><P>I found many Forums where this problem is discussed, but no solution yet </P><P></P><P>Can u help Intel?</P> Sat, 14 Jan 2012 17:46:25 GMT https://community.intel.com/t5/Graphics/Intel-HD-Graphics-No-HDMI-Monitor-Detected/m-p/408594#M33404 idata 2012-01-14T17:46:25Z