https://community.intel.com/t5/Graphics/Pc-wont-display-anything-with-new-Motherboard/m-p/600484#M69591 <P>Hi i recently bought a new motherboard (asus H81M-plus) and it wont display anything using my i7-4790k cpu which is on the supported list of the motherboard and the bios is up to date . I used an older cpu cpu though and worked fine . So any ideas ?</P><P> </P> Sat, 13 Jan 2018 13:28:17 GMT ZTemp 2018-01-13T13:28:17Z https://community.intel.com/t5/Graphics/Pc-wont-display-anything-with-new-Motherboard/m-p/600484#M69591 <P>Hi i recently bought a new motherboard (asus H81M-plus) and it wont display anything using my i7-4790k cpu which is on the supported list of the motherboard and the bios is up to date . I used an older cpu cpu though and worked fine . So any ideas ?</P><P> </P> Sat, 13 Jan 2018 13:28:17 GMT https://community.intel.com/t5/Graphics/Pc-wont-display-anything-with-new-Motherboard/m-p/600484#M69591 ZTemp 2018-01-13T13:28:17Z https://community.intel.com/t5/Graphics/Pc-wont-display-anything-with-new-Motherboard/m-p/600485#M69592 <P>Clear CMOS after changing a processor.</P><P></P><P>Check all iGPU configurations in BIOS as described at <A href="https://www.asus.com/de/Motherboards/H81MPLUS/HelpDesk_Manual/">https://www.asus.com/de/Motherboards/H81MPLUS/HelpDesk_Manual/</A> H81M-PLUS Manual | Mainboards | ASUS Deutschland </P><P></P><P>Max. CPU Graphics Ratio</P><P>GPU Boost</P><P>CPU Graphics Voltage</P><P></P><P>Graphics Configuration</P><P>Allows you to select a primary display from iGPU, and PCIe graphical devices.</P><P>Primary Display [Auto]</P><P>Allows you to select which of the iGPU/PCIE Graphics device should be the Primary </P><P>Display. Configuration options: [Auto] [iGPU] [PCIE]</P><P>iGPU Memory [Auto]</P><P>Allows you to select the amount of system memory allocated to DVMT 5.0 used by the </P><P>iGPU. Configuration options: [Auto] [32M] [64M] [96M] [128M] [160M] [192M] [224M] </P><P>[256M] [288M][320M] [352M] [384M] [416M] [448M] [480M] [512M] [1024M]</P><P>Render Standby [Auto]</P><P>Allows you to enable or disable Intel® Graphics Render Standby support to reduce </P><P>iGPU power use when the system is idle. Configuration options: [Auto] [Disabled] </P><P>[Enabled]</P><P>iGPU Multi-Monitor [Disabled]</P><P>Set this item to [Enabled] to empower both integrated and discrete graphics for </P><P>multiple-monitor output. The iGPU shared system memory size will be fixed at 64MB.</P><P>Configuration options: [Disabled] [Enabled]</P> Sat, 13 Jan 2018 15:33:23 GMT https://community.intel.com/t5/Graphics/Pc-wont-display-anything-with-new-Motherboard/m-p/600485#M69592 Stefan3D 2018-01-13T15:33:23Z