https://community.intel.com/t5/Graphics/Intel-Rapid-Storage-Technology-identifying-failed-drives/m-p/267358#M7281 <P>Hello,</P><P></P><P>I have recently upgraded to version 9.6.0.1014 of the software and am experiencing drive failures when under load. I have seen the thread about false failure reportings and do not believe that is the case as the failure occurs under load.</P><P></P><P>With the previous version of the software messages were logged to the eventlog when a drive failure occured. WIth this new version the array appears to rebuld straight away and I am unable to identify the faulty drive.</P><P></P><P>Is there any other logging mechanism in the new software or a way to prevent automatic rebuilds?</P> Tue, 24 Aug 2010 14:00:20 GMT idata 2010-08-24T14:00:20Z https://community.intel.com/t5/Graphics/Intel-Rapid-Storage-Technology-identifying-failed-drives/m-p/267358#M7281 <P>Hello,</P><P></P><P>I have recently upgraded to version 9.6.0.1014 of the software and am experiencing drive failures when under load. I have seen the thread about false failure reportings and do not believe that is the case as the failure occurs under load.</P><P></P><P>With the previous version of the software messages were logged to the eventlog when a drive failure occured. WIth this new version the array appears to rebuld straight away and I am unable to identify the faulty drive.</P><P></P><P>Is there any other logging mechanism in the new software or a way to prevent automatic rebuilds?</P> Tue, 24 Aug 2010 14:00:20 GMT https://community.intel.com/t5/Graphics/Intel-Rapid-Storage-Technology-identifying-failed-drives/m-p/267358#M7281 idata 2010-08-24T14:00:20Z