topic How to collage display programmatically? in Graphics

How to collage display programmatically?

Whitesoft — Wed, 26 Aug 2020 11:18:49 GMT

I know that I can collage display by Intel® Graphics Control Panel and Intel® Graphics Command Center.

However, can I collage display programmatically? Whatever the solution is Windows API, Intel API, Powershell, Command Line or any other document.

I have searched Google and StackOverflow, but no solution found. I even tried to edit registry directly, but it didn't work.

Waiting for help, thanks!

Re:How to collage display programmatically?

Maria_R_Intel — Wed, 26 Aug 2020 21:35:25 GMT

Hello Whitesoft,

Thank you for posting on the Intel* Community.

To better assist you, please provide us the below information:

How are you connecting the displays? Please include the video ports and if you are using a straight-through connection or adapters

Please run the following tool in Windows* and attach the report generated. 

Intel® System Support Utility (Intel® SSU) 

Intel® SSU Download
Open the application and click on "Scan" to see the system and device information. By default, Intel® SSU will take you to the "Summary View". 
Click on the menu where it says "Summary" to change to "Detailed View". 
To save your scan, click on "Next", then "Save".

With all the external displays connected, provide the Intel* Graphics Command Center report:

>Go to the Intel Graphics Command Center

>Support

>System Diagnostic

>Generate report.

>Attach the report file.

Best regards,

Maria R.

Intel Customer Support Technician

回复： Re:How to collage display programmatically?

Whitesoft — Thu, 27 Aug 2020 03:07:38 GMT

Thank you for your reply.

I have followed your guide and create the reports you need. Please check the attachments.

More information I can give you:

1. I will always collage displays horizontally

2. I will always use HDMI to collage displays

3. All displays have the same size, whether it is physical or display resolution

4. I am not sure the physical size and display resoluction of the display, because our company have more than one model of machine. I must be compatible when programming.

Re:How to collage display programmatically?

Maria_R_Intel — Fri, 28 Aug 2020 16:29:43 GMT

Hello Whitesoft,

Thank you for your response.

I checked this internally and unfortunately, the only way to set Collage/Combined mode is through Intel* Graphics Command Center.

If you need any additional information, please submit a new question as this thread will no longer being monitored.

Best regards,

Maria R.

Intel Customer Support Technician