topic Re: Intel HD 3000 HDMI overscan? in Graphics

Intel HD 3000 HDMI overscan?

idata — Tue, 11 Sep 2012 20:36:01 GMT

Hello! Ive been having some trouble connecting my PC to my sony bravia KDL-32U2530. There's not many options on the TV about HDMI settings so I guess the problem can only be fixed from the computer. MY TV's revolution is 1366x768 so that's where I have it even if the windows recommend 1920x1080. Well, I have tried many different things and possibilities with the resolutions and I can't make it work. any help would be much appreciated. thank you

Re: Intel HD 3000 HDMI overscan?

Marcos_U_Intel — Wed, 12 Sep 2012 20:50:40 GMT

Hello,

One of the reasons you are having problems with the resolutions of your monitor is because of the Extended Display Information Data (EDID) does not read properly when connected to some digital flat panel displays. Display devices describe their capabilities by sending EDID to the computer.

To solve your issue I recommend you follow the solution steps at the link below:

http://www.intel.com/support/graphics/sb/cs-028366.htm http://www.intel.com/support/graphics/sb/cs-028366.htm

Also try different HDMI cables and make sure you install the latest drivers from your monitor.

Regards,

Michael

Re: Intel HD 3000 HDMI overscan?

idata — Wed, 12 Sep 2012 23:49:18 GMT

I installed the drivers but there's no difference at all. Not only that but it also changed the refresh rate at 29hz. However thanks for the reply.

Re: Intel HD 3000 HDMI overscan?

idata — Thu, 13 Sep 2012 00:12:00 GMT

Here's a diagnostic report in case you need it

Intel(R) HD Graphics

Report Date: 9/13/2012

Report Time[hr:mm:ss]: 3:4:23

Driver Version: 8.15.10.2279

Operating System: Windows 7 Service Pack 1(6.1.7601)

Default Language: English (United States)

DirectX* Version: 10.1

Physical Memory: 4013 MB

Minimum Graphics Memory: 64 MB

Maximum Graphics Memory: 1696 MB

Graphics Memory in Use: 92 MB

Processor: Intel64 Family 6 Model 42 Stepping 7

Processor Speed: 2607 MHz

Vendor ID: 8086

Device ID: 0102

Device Revision: 09

* Processor Graphics Information *

Processor Graphics in Use: Intel(R) HD Graphics

Video BIOS: 2117.0

Current Graphics Mode: 1366 by 768

* Devices Connected to the Graphics Accelerator *

Active Digital Televisions: 1

* Digital Television *

Monitor Name: Generic PnP Monitor

Display Type: Digital

Gamma Value: 2,2

DDC2 Protocol: Supported

Maximum Image Size:

Horizontal: 27,56 inches

Vertical: 15,75 inches

Monitor Supported Modes:

720 by 480 (60 Hz)

1920 by 540 (50 Hz)

Display Power Management Support:

Standby Mode: Not Supported

Suspend Mode: Not Supported

Active Off Mode: Not Supported

Raw EDID:

00 FF FF FF FF FF FF 00 4D D9 01 00 01 01 01 01

32 0F 01 03 80 46 28 78 0A 0D C9 A0 57 47 98 27

12 48 4C 00 00 00 01 01 01 01 01 01 01 01 01 01

01 01 01 01 01 01 01 1D 80 D0 72 1C 16 20 10 2C

25 80 DF A4 21 00 00 9E 8C 0A D0 8A 20 E0 2D 10

10 3E 96 00 DF A4 21 00 00 18 00 00 00 FC 00 53

4F 4E 59 20 54 56 0A 20 20 20 20 20 00 00 00 FD

00 30 3E 0E 2E 08 00 0A 20 20 20 20 20 20 01 48

02 03 21 77 4D 94 03 04 12 13 05 01 07 16 15 11

06 02 23 09 07 07 83 01 00 00 66 03 0C 00 20 00

80 01 1D 00 72 51 D0 1E 20 6E 28 55 00 DF A4 21

00 00 1E 8C 0A D0 90 20 40 31 20 0C 40 55 00 DF

A4 21 00 00 18 01 1D 00 BC 52 D0 1E 20 B8 28 55

40 DF A4 21 00 00 1E 01 1D 80 18 71 1C 16 20 58

2C 25 00 DF A4 21 00 00 9E 8C 0A D0 90 20 40 31

20 0C 40 55 00 30 A4 21 00 00 18 00 00 00 00 68

* Other names and brands are the property of their respective owners. *

Re: Intel HD 3000 HDMI overscan?

idata — Thu, 13 Sep 2012 11:18:22 GMT

I even tried to make a 1920x540 custom resolution using intel's control panel but it says the value i've entered it's incorrect. works when i put 50hz though, but then the screen goes blank.. pls tell me what to do to fix it!!

Re: Intel HD 3000 HDMI overscan?

Marcos_U_Intel — Thu, 13 Sep 2012 22:16:27 GMT

Hello,

I do notice from the diagnostic report that you do not have the monitor drivers installed.

I recommend to contact your monitor manufacturer for the latest drivers, and if the issue persists test another monitor.

Regards,

Michael

Re: Intel HD 3000 HDMI overscan?

idata — Thu, 13 Sep 2012 22:33:22 GMT

This is not a monitor but a Sony Bravia TV. From what I see sony have not release any drivers for pc so what else can I do to fix it?

Re: Intel HD 3000 HDMI overscan?

idata — Mon, 17 Sep 2012 15:48:45 GMT

come on, anyone?!?

Re: Intel HD 3000 HDMI overscan?

Marcos_U_Intel — Mon, 17 Sep 2012 17:19:05 GMT

Hello,

At this point I recommend not to use any kind of video adapters or splitters if you are using any, and also to test another monitor or TV.

Regards,

Michael

Re: Intel HD 3000 HDMI overscan?

ROBERT_U_Intel — Tue, 18 Sep 2012 16:43:37 GMT

Hi John

From the diagnostic report you attached I see that the Intel HD Graphics driver version you are using is 2279. Would it be possible for you to try the latest version from Intel available http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21428&lang=eng&OSVersion=Windows%207%20(32-bit)*&DownloadType=Drivers here and report your results?