topic Try to use path without in Intel® Integrated Performance Primitives

Can not build ipp-samples.7.1.1.013

hande_b_ — Thu, 05 Sep 2013 09:01:11 GMT

Hi everyone, i try to build code samples 7.1.1.013 from the guide

http://software.intel.com/en-us/articles/building-intel-ipp-71-samples#comment-1751314

I tried with lots of commands even example commands but it says invalid configuration everytime . What is the problem?

Hi,

Sergey_K_Intel — Thu, 05 Sep 2013 14:06:50 GMT

Hi,

Could you try one of the command provided as examples at the end of article:

perl build.pl --cmake=audio-video-codecs,ia32,vc2010,s,st,release
perl build.pl --cmake=uic,intel64,make,s,mt,debug --build
perl build.pl --cmake=uic,intel64,make,d,mt,debug --build --clean

What's happening then?

Regards,
Sergey

Yes it says

hande_b_ — Thu, 05 Sep 2013 14:30:14 GMT

Yes it says

ERROR: invalid configuration

I downloaded activePerl 5.16

hande_b_ — Thu, 05 Sep 2013 15:12:04 GMT

I downloaded activePerl 5.16.3 and i run the command from windows powershell

...

SergeyKostrov — Thu, 05 Sep 2013 23:38:51 GMT

... - Make sure all environment variables are set by running the ippvars or compilervars script. ... Did you do that step?

It can be the issue with

Sergey_K_Intel — Fri, 06 Sep 2013 04:25:42 GMT

It can be the issue with directory name. The script doesn't work if some of sample directory/subdirectory names contain a space. Could you check this?

Regards,
Sergey

@Sergey Khlystov

hande_b_ — Fri, 06 Sep 2013 08:26:01 GMT

@Sergey Khlystov

I checked nothing has changed

@Sergey Kostrov

Can you explain what you mean with " all environment variables are set by running the ippvars or compilervars script"

For regular samples

Sergey_K_Intel — Fri, 06 Sep 2013 09:32:04 GMT

For regular samples (excluding uic/picnic) no other, than IPPROOT, environment variables required. If the script doesn't find proper IPP configuration, the diagnostic message is defferent, i.e.
Intel(R) IPP was not found (required)!

Yes, I see the problem under Windows Powershell. While we're investigating this, please use Windows "cmd" window for samples build.

Regards,
Sergey

Found workaround :). The

Sergey_K_Intel — Fri, 06 Sep 2013 10:06:26 GMT

Found workaround :). The commands like:

perl build.pl "--cmake=uic,intel64,vc2010,s,mt,debug" "--build"

(i.e. with double quotes) work in powershell. Looks, like powershell parses the command line before Perl.

Regards,
Sergey

I have a new problem :)

hande_b_ — Fri, 06 Sep 2013 11:34:20 GMT

I have a new problem :)

Now says Intel IPP was not found <required>!

I added IPPROOT = "C:\Program Files (x86)\Intel\Composer XE 2013 SP1.083\ipp" to system variables , log off - log in , run command again it didn't fixed :) Is there anyting else that ı have to add to system variables or anywhere else?

The shell script ippvarsem64t

hande_b_ — Fri, 06 Sep 2013 12:01:20 GMT

The shell script ippvarsem64t.sh in the tools/env directory sets your lib, include, and path environment variables for Intel^®IPP.

I can not find "ippvarsem64t.sh" such a file

>>...Can you explain what you

SergeyKostrov — Fri, 06 Sep 2013 12:20:33 GMT

>>...Can you explain what you mean with " all environment variables are set by running the ippvars or >>compilervars script"... This is the statement from the Guide you've mentioned in the 1st post and take a look at it again.

Quote:hande b. wrote:

Sergey_K_Intel — Fri, 06 Sep 2013 12:39:41 GMT

hande b. wrote:

I added IPPROOT = "C:\Program Files (x86)\Intel\Composer XE 2013 SP1.083\ipp" to system variables

Please use directory name without double quotes

set IPPROOT = C:\Program Files (x86)\Intel\Composer XE 2013 SP1.083\ipp

Regards,
Sergey

It supposed that when setting

hande_b_ — Fri, 06 Sep 2013 14:36:00 GMT

It supposed that when setting up intel primitives the environmental variables setted automatically.

@Sergey Khlystov you misuderstood me i used quotes for emphasize the IPPROOT value :) I setted it from advanced system settings not from console .

I found ippvars_ia32.bat file

hande_b_ — Fri, 06 Sep 2013 15:45:32 GMT

I found ippvars_ia32.bat file for setting variables and run it, but console is opened and closed immediately

The command files like

Sergey_K_Intel — Fri, 06 Sep 2013 16:36:05 GMT

The command files like ippvars_ia32.bat are to be submitted from open command line window. They update the environment of current cmd session. Look at my log:

C:\Users\skhlysto>dir "%IPPROOT%"
Volume in drive C is OSDisk
Volume Serial Number is 243E-FF80

Directory of C:\Users\skhlysto

File Not Found

C:\Users\skhlysto>"c:\Program Files (x86)\Intel\Composer XE 2013\ipp\bin\ippvars.bat" ia32

C:\Users\skhlysto>dir "%IPPROOT%"
Volume in drive C is OSDisk
Volume Serial Number is 243E-FF80

Directory of c:\Program Files (x86)\Intel\Composer XE 2013\ipp

07/11/2013 15:06 <DIR> .
07/11/2013 15:06 <DIR> ..
07/11/2013 15:07 <DIR> bin
07/11/2013 15:06 <DIR> demo
07/11/2013 15:06 <DIR> include
07/11/2013 15:06 <DIR> interfaces
07/11/2013 15:06 <DIR> lib
07/11/2013 15:06 <DIR> tools
0 File(s) 0 bytes
8 Dir(s) 21,207,990,272 bytes free

C:\Users\skhlysto>

After that "perl build.pl" should work. Just change the location of ipp\bin\ippvars.bat to yours. All of this is described in IPP docs.

Regards,
Sergey

Hi , the problem is not fixed

hande_b_ — Tue, 10 Sep 2013 11:11:24 GMT

Hi , the problem is not fixed still .

I run ippvars.bat ia32 from ipp/bin directory,

compilervars.bat ia32 from Composer XE\bin

compilervars.bat ia32 from Composer XE 2013 SP1.083\bin

İ am inserting screenshots

Hi,

Sergey_K_Intel — Wed, 11 Sep 2013 07:59:07 GMT

Hi,

I am on vacation, thus there will be no expedite answers. Did you do "dir %IPPROOT%"? What is it showing? The rules of searching for IPP in the script are simple. It looks for ipp.h (or, ippcore.h I don't remember) in %IPPROOT%\include and it looks for library ippcorel,lib in %IPPROOT%\lib\ia32. It can be seen from Cmake script FindIPP. I have no working sandox and cannot verify .I asked out other guys to help.

Regards,
Sergey

Hello,

Anton_S_Intel — Wed, 11 Sep 2013 10:43:00 GMT

Hello,

I've just tried to setup IPPROOT environment variable via compilervars.cmd and it works.
Also I have tried the same compiler environment shell-script with PowerShell andit doesn't work, %IPPROOT% variable is empty

You have attached only the logs of environment setup. What about build error in examples? Can you also attach log?

Hi Hande,

Ying_H_Intel — Thu, 12 Sep 2013 08:45:39 GMT

Hi Hande,

Which sample do you like to run or what command you'd like to run to build the sample? I recalled there are many build issues in the forum. So i had attached two built MSVC2010 project in

http://software.intel.com/en-us/forums/topic/339934

You can see the mscv 2010 solution under __cmake\audio-video-codecs.ia32.vc2010.s.st.

Best Regards,

Ying