Can't launch parallel program on Windows 7 Home Premium SP1 x64

Seifer_Lin — Fri, 15 Jul 2011 03:11:27 GMT

Hi:

I have 2 machines, and both of them are installed with Windows 7 Home Premium SP1 x64 version.

Machine1: 192.168.1.65

Machine2: 192.168.1.73

Both machines installed the smpd from Intel MPI 4.0.2.004

mpiexec.exe is also from Intel MPI 4.0.2.004

Both machines set the autodisconnect value to zero

(According to the release note of Intel MPI:

Some operating systems have a limitation on the number of concurrent connections. This limitation may cause job failure with the following error message:

"no more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept".

To reduce the probability of this issue, decrease the auto disconnect time.

From the command line do the following:

net config server /autodisconnect:time_before_autodisconnect

The default value of the auto disconnect time is usually set to 15 minutes.)

The parallel program is just a hello world program.

I run the following command:

mpiexec -hosts 2 192.168.1.65 8 192.168.1.73 8 \\\\\\\\192.168.1.65\\\\Shared\\\\HelloWorld.exe

And I got the following errors ...

[10] PMI_Init failed: FAIL - init called when another process has exited without

calling init

[11] PMI_Init failed: FAIL - init called when another process has exited without

calling init

[13] PMI_Init failed: FAIL - init called when another process has exited without

calling init

[14] PMI_Init failed: FAIL - init called when another process has exited without

calling init

[9] PMI_Init failed: FAIL - init called when another process has exited without

calling init

[8] PMI_Init failed: FAIL - init called when another process has exited without

calling init

Fatal error in MPI_Init: Other MPI error, error stack:

MPIR_Init_thread(586): Initialization failed

MPID_Init(134).......: channel initialization failed