topic Try specifying a full path to in Intel® MPI Library

execvp error (Parallel running between 2 nodes)

milad_m_ — Fri, 16 Jun 2017 15:04:23 GMT

I'm trying to run a simple parallel code between 2 nodes (VS 2013 and intel cluster 2017). I have successfully run in parallel between inner cores in the node 0. I create host.txt file then copy the main folder in to the node1 desktop. Both folders in each node are shared.But when i run it between 2 nodes this error appear. The cmd code that i use is:

mpiexec -n 2 -ppn 1 -f host.txt c.exe

which one process runs in node 0 and another is in node1.

I attached host file and error figure.Thanks.

Try specifying a full path to

Gregg_S_Intel — Fri, 16 Jun 2017 16:54:58 GMT

Try specifying a full path to c.exe.

i'm new with this. would you

milad_m_ — Fri, 16 Jun 2017 19:48:00 GMT

I'm new with this. Would you please help me how can i add full patch in addition to host IP to the host.txt file ? I also add c.exe in both pc to the environment variable. The problem still persist.

Full path as in c:\something

Gregg_S_Intel — Fri, 16 Jun 2017 22:19:05 GMT

Full path as in c:\something\something\something\c.exe

Tanks but it doesn't work.I

milad_m_ — Sun, 18 Jun 2017 18:42:54 GMT

Tanks but it doesn't work.I add full path after IP address for each node in the host file. i attached error and host file. is it the right format for specifying a full path?

P.S: both nodes have a same username and password and the folders containing exe file and main code are in the same path in both nodes.

You still haven't specified

Gregg_S_Intel — Sun, 18 Jun 2017 20:36:27 GMT

No,you still haven't specified the path to c.exe in your run command, and you've added some bad syntax to your host file.

Have a look at this getting started guide: https://software.intel.com/en-us/get-started-with-mpi-for-windows

I couldn't find anything

milad_m_ — Sun, 18 Jun 2017 21:56:50 GMT

I couldn't find anything about specify a path to exe file in cmd from that link.I think if nodes increase its hard to path to all exe files. Is it possible to share folders (containing exe files) from all nodes and then just work with node0 to run simultaneously in all nodes? (just if the main code changes, replace the new exe file with old ones in all nodes).

mpiexec ... c:\something\c

Gregg_S_Intel — Sun, 18 Jun 2017 22:05:22 GMT

mpiexec ... c:\something\c.exe

The executable has to be already present on all nodes, however you want to do that. mpiexec does not copy anything

In Fig 1 just run with 1 cpu

milad_m_ — Sun, 18 Jun 2017 23:58:00 GMT

In Fig 1 just run with 1 cpu in node0 and in Fig 2 run with 2 cpus(one from node 0 and another from node 1) in node0. These are appeared.

Perhaps you perhaps mean to

Gregg_S_Intel — Mon, 19 Jun 2017 13:58:56 GMT

Perhaps you perhaps mean to specify -hosts?

Check that you have followed the prerequisite steps in Intel MPI Developers Guide for Windows OS.

Good luck!