topic Hi Peter, in OpenCL* for CPU

Code Builder initialization failed

peter_b_8 — Thu, 02 Jun 2016 12:17:41 GMT

Dears,

per OpenCL installation and running MS Visual Community 2015 I got issue :

Code Builder initialization failed"

Unable to load DLL "KernelBuilderAPI.dll": The specified procedure could not be found. (Exception from HRESULT: 0x8007007F)

Best regards,

Peter

=============================

peter_b_8 — Thu, 02 Jun 2016 12:23:33 GMT

==================================================
GPU Caps Viewer v1.30.0.0 report
http://www.geeks3d.com
http://www.ozone3d.net/gpu_caps_viewer/
===================================================

===================================[ System / CPU ]
- CPU Name: Intel(R) Core(TM) i5-4300M CPU @ 2.60GHz
- CPU Core Speed: 2594 MHz
- CPU logical cores: 4
- Family: 6 - Model: 12 - Stepping: 3
- Physical Memory Size: 8192 MB
- Operating System: Windows 7 64-bit build 7601 [Service Pack 1]
- PhysX Version: drivers not installed

===================================[ Graphics Adapters / GPUs ]
- Current Display Mode: 1600x900 @ 60 Hz - 32 bpp
- Num GPUs: 1

- GPU 1
- Name: Intel(R) HD Graphics 4600
- GPU codename: Haswell(GT2)
- Device ID: 8086- 416
- Subdevice ID: 1028- 5BD
- Revision ID: 6
- Driver: 10.18.10.3574 (4-24-2014) - GL:ig75icd64.dll
- Bus Id: -1
- Shader cores: 20
- Texture units: 4
- ROP units: 2
- TDP: 84W
- BIOS version: Intel Video BIOS
- Memory size: 2112MB
- Memory type:
- Memory bus width: 0-bit

===================================[ OpenGL GPU Capabilities ]
- OpenGL vendor: Intel
- OpenGL renderer: Intel(R) HD Graphics 4600
- OpenGL Version: 4.2.0 - Build 10.18.10.3574
- GLSL (OpenGL Shading Language) Version: 4.20 - Build 10.18.10.3574
- ARB Texture Units: 8
- Vertex Shader Texture Units: 32
- Pixel Shader Texture Units: 32
- Geometry Shader Texture Units: 32
- Max Texture Size: 16384x16384
- Max Anisotropic Filtering Value: X16.0
- Max Point Sprite Size: 255.0
- Max Dynamic Lights: 8
- Max Viewport Size: 16384x16384
- Max Vertex Uniform Components: 4096
- Max Fragment Uniform Components: 4096
- Max Geometry Uniform Components: 4096
- Max Varying Float: 64
- Max Vertex Bindable Uni

Hi Peter,

Robert_I_Intel — Tue, 07 Jun 2016 01:19:03 GMT

Hi Peter,

Could you please update your graphics driver from the following https://downloadcenter.intel.com/product/81496/Intel-HD-Graphics-4600-for-4th-Generation-Intel-Core-Processors and try again? Thanks!

Hello,

peter_b_8 — Tue, 07 Jun 2016 07:38:21 GMT

Hello,

thanks for replay - I can't install driver from your download center since I'm using Dell E6440 and it refuses to install driver from your link. The latest driver DELL is offering:

Intel HD, HD 4000/4200/4400/4600/5000/5100/5200/5300/5500 Graphics Driver.

File Name: Video_Driver_FGGYJ_WN32_10.18.14.4280_A17.EXE

Importance: Recommended

Description: Update Package for Microsoft® Windows® (128.04 MB)

Release Date: 18 Nov 2015

Version: 10.18.14.4280 ,A17

Last Updated: 25 Nov 2015

Best regards,

Peter

=============================

peter_b_8 — Tue, 07 Jun 2016 08:56:57 GMT

===================================[ Graphics Adapters / GPUs ]
- Current Display Mode: 1600x900 @ 60 Hz - 32 bpp
- Num GPUs: 1

- GPU 1
- Name: Intel(R) HD Graphics 4600
- GPU codename: Haswell(GT2)
- Device ID: 8086- 416
- Subdevice ID: 1028- 5BD
- Revision ID: 6
- Driver: 10.18.14.4280 (8-28-2015) - GL:ig75icd64.dll
- Bus Id: -1
- Shader cores: 20
- Texture units: 4
- ROP units: 2
- TDP: 84W
- BIOS version: Intel Video BIOS
- Memory size: 1024MB
- Memory type:
- Memory bus width: 0-bit

Issues prevail - same

peter_b_8 — Tue, 07 Jun 2016 09:02:53 GMT

Issues prevail - same symptoms:

Code Builder initialization failed"

Unable to load DLL "KernelBuilderAPI.dll": The specified procedure could not be found. (Exception from HRESULT: 0x8007007F)

You should be able to update

Joose_S_ — Tue, 07 Jun 2016 09:12:16 GMT

You should be able to update drivers through windows device manager, or atleast I was on my dekstop dell.

for driver update I used

peter_b_8 — Tue, 07 Jun 2016 12:05:23 GMT

for driver update I used "win64_153631.4414.exe" and during installing I got:

The driver being installed is not validated for this computer. Please obtain the appropriate driver from the computer manufacturer. Setup will exit.

then I used DELL Video_Driver_FGGYJ_WN32_10.18.14.4280_A17.EXE and even though MS Visual 2015 issue still prevail and have message:

Code Builder initialization failed"

Unable to load DLL "KernelBuilderAPI.dll": The specified procedure could not be found. (Exception from HRESULT: 0x8007007F)

By updating driver thru Device Manager "Automatically for driver software" then driver is "updated" to very old version of year 2013.

Quote:peter b. wrote:

Joose_S_ — Tue, 07 Jun 2016 12:44:00 GMT

peter b. wrote:

By updating driver thru Device Manager "Automatically for driver software" then driver is "updated" to very old version of year 2013.

Don't use the "search for drivers autimatically" but rather "browse my comptuer for driver software" and then select the binary you downloaded. This at least worked for me.

where is binary located ?

peter_b_8 — Tue, 07 Jun 2016 14:17:20 GMT

where is binary located ? win64_153631.4414.exe run into troubles but on progress bar you can see some "unpacking" - where those binaries are located to update driver?

Are sure the problem with MS Visual is due to driver version?

just F.Y.I. Dell is keeping

peter_b_8 — Tue, 07 Jun 2016 14:23:57 GMT

just F.Y.I. Dell is keeping drivers at C:\Drivers folder so when "browse my computer for driver software" it finds DELL drivers. SO I need to know where your driver is copied (what location) from win64_153631.4414.exe

please see thread

peter_b_8 — Wed, 08 Jun 2016 06:57:59 GMT

please see thread

https://software.intel.com/en-us/comment/1874441