Hello, I've been using Intel FPGA Arria 10 (Mustang-F100-A10-R10) board for running OpenVINO. Here, I could run the a10_vision_bitstreams from OpenVINO.

IJais — Wed, 02 Jan 2019 17:49:10 GMT

However, I couldn't successfully run the OpenCL examples: 'Hello_world' and ' vector_add' programs using the same setup for OpenVINO.

The error messages for running the vector_add executable are shown below.

Greatly appreciated your suggestions...

Thanks,

Ishu

root@splineai:/home/appl/quarts/fpga_support_files# aocl install

Do you want to install /opt/altera/aocl-pro-rte/aclrte-linux64/board/hddlf_1150_sg1? [y/n] y

aocl install: Running install from /opt/altera/aocl-pro-rte/aclrte-linux64/board/hddlf_1150_sg1/linux64/libexec

Looking for kernel source files in /lib/modules/4.13.0-45-generic/build

Using kernel source files from /lib/modules/4.13.0-45-generic/build

Building driver for BSP with name hddlf_1150_sg1

make: Entering directory '/usr/src/linux-headers-4.13.0-45-generic'

CC [M] /tmp/opencl_driver_fgui0k/aclpci_queue.o

CC [M] /tmp/opencl_driver_fgui0k/aclpci.o

CC [M] /tmp/opencl_driver_fgui0k/aclpci_fileio.o

CC [M] /tmp/opencl_driver_fgui0k/aclpci_dma.o

CC [M] /tmp/opencl_driver_fgui0k/aclpci_pr.o

CC [M] /tmp/opencl_driver_fgui0k/aclpci_cmd.o

LD [M] /tmp/opencl_driver_fgui0k/aclpci_hddlf_1150_sg1_drv.o

Building modules, stage 2.

MODPOST 1 modules

CC /tmp/opencl_driver_fgui0k/aclpci_hddlf_1150_sg1_drv.mod.o

LD [M] /tmp/opencl_driver_fgui0k/aclpci_hddlf_1150_sg1_drv.ko

make: Leaving directory '/usr/src/linux-headers-4.13.0-45-generic'

===============================================

root@splineai:/home/appl/quarts/fpga_support_files# aocl diagnose

--------------------------------------------------------------------

Device Name:

acl0

Package Pat:

/opt/altera/aocl-pro-rte/aclrte-linux64/board/hddlf_1150_sg1

Vendor: Intel(R) Corporation

Phys Dev Name Status Information

aclhddlf_1150_sg10Passed Arria 10 Pyramid Lake Platform (aclhddlf_1150_sg10)

PCIe dev_id = 2494, bus:slot.func = 02:00.00, Gen3 x8

FPGA temperature = 46.4297 degrees C.

DIAGNOSTIC_PASSED

--------------------------------------------------------------------

Call "aocl diagnose <device-names>" to run diagnose for specified devices

Call "aocl diagnose all" to run diagnose for all devices

===================================================

appl@splineai:~/workspace/exm_opencl_vector_add_x64_linux/vector_add$ bin/host

Initializing OpenCL

Platform: Intel(R) FPGA SDK for OpenCL(TM)

Using 1 device(s)

a10gx_1ddr : Arria 10 Pyramid Lake Platform (aclhddlf_1150_sg10)

Using AOCX: vector_add.aocx

Context callback: Specified kernel was not built for any devices

ERROR: CL_INVALID_KERNEL_NAME

Location: host/src/main.cpp:169

Failed to create kernel

Segmentation fault (core dumped)

Re: Hello, I've been using Intel FPGA Arria 10 (Mustang-F100-A10-R10) board for running OpenVINO. Here, I could run the a10_vision_bitstreams from OpenVINO.

FawazJ_Altera — Thu, 10 Jan 2019 17:39:29 GMT

Hello Ishu,

Thank you for contacting us via forum.

I will investigate more about your issue and send you the feedback as I get it.

Thanks

topic Re: Hello, I've been using Intel FPGA Arria 10 (Mustang-F100-A10-R10) board for running OpenVINO. Here, I could run the a10_vision_bitstreams from OpenVINO. in OpenCL* for CPU

Hello, I've been using Intel FPGA Arria 10 (Mustang-F100-A10-R10) board for running OpenVINO. Here, I could run the a10_vision_bitstreams from OpenVINO.

Re: Hello, I've been using Intel FPGA Arria 10 (Mustang-F100-A10-R10) board for running OpenVINO. Here, I could run the a10_vision_bitstreams from OpenVINO.